15m 50ft 6mmx4mm Pneumatic Polyurethane PU Hose Tube Pipe Clear Blue
- Package content 1 x pu hose. Color clear blueweight 313g. Product name pu hosematerial polyurethane(pu). Thickness 1mm/004″total length 15m/50ft. Outside diameter 6mm/024″inside diameter 4mm/016″.
Saim 5M 16Ft 5mm x 8mm Pneumatic Polyurethane PU Hose Tube Pipe Clear
- Package content 1 x polyurethane tube. Pu wall thickness 3mm / 012″pu total length 5m / 16ft. Product name polyurethane tubematerial polyurethane(pu), metal, plastic. Pu outside diameter 8mm / 031″pu inside diameter 5mm / 020″.
Coilhose Pneumatics PR532-15B-B Flexcoil Polyurethane Coiled Air Hose, .160-Inch ID, 15-Foot Length with (2) 1/4-Inch MPT Swivel Fittings, Dark Blue
- Coiled polyurethane hose for a wide range of industrial applications. Two 1/4″ factory-installed, brass reusable male npt swivel fittings. Single-layer polyurethane tube for durability, persistent coil memory, flexibility in cold weather, and resistance to weathering, abrasion, oil, and kinks. Temperature range of -40 to +165 degrees f. Straight tails for increased life of fittings and hose ends.
Amflo 545HR-RET Manual Hose Reel With 200 PSI 3/8″ x 75′ Polyurethane Gold Air Hose With Dual Output Fittings
- Gold polyurethane hose for durability, flexibility in cold weather, and resistance to weathering, abrasion, oil, and kinks. Hose has a maximum pressure rating of 200 psi and a temperature range of -40 to +160 degrees f. Two factory-installed brass male npt fittings with one attached brass industrial interchange connector and bend restrictor on the hose end, and two brass industrial interchange couplings attached to the reel for tool connections. Dual outlet fittings on reel allow for connection of up to two pneumatic tools. Ready-to-mount manual hose and reel assembly for extension of compressed air source in remote work applications.
Hitachi 19412QP 1/4-Inch by 50 Foot Polyurethane Green Air Hose, No Fittings
- Well-built with a simple design and high quality materials. Highly kink resistant. Comes with a 30-day limited warranty. Screws on with little assembly. Remains flexible in cold weather. Spiral reinforced with heavy duty bend restrictors for durability. Very lightweight, 40 percent lighter than pvc.
Coilhose Pneumatics PU38-30B-B Flexcoil Polyurethane Coiled Air Hose, 3/8-Inch ID, 30-Foot Length with (2) 3/8-Inch Reusable Strain Relief MPT Swivel Fittings, Dark Blue
- Single-layer polyurethane tube for durability, persistent coil memory, flexibility in cold weather, and resistance to weathering, abrasion, oil, and kinks. Coiled polyurethane hose for a wide range of industrial applications. Straight tails for increased life of fittings and hose ends. Temperature range of -40 to +165 degrees f. Two 3/8″ factory-installed, brass reusable strain relief male npt swivel fittings.
Amflo 530HR-RET Automatic Enclosed Hose Reel With 300 PSI 1/4″ x 50′ Blue Polyurethane Air Hose
- One 1/4″ factory-installed brass male npt tool-end fitting and one 1/4″ factory-installed brass female npt fitting for the air supply. Blue polyurethane hose for durability, flexibility in cold weather, and resistance to weathering, abrasion, oil, and kinks. Ready-to-mount closed hose and reel assembly for commercial and industrial applications. Can be mounted on a wall, floor, or ceiling and has adjustable guide arm to dispense hose at various angles. Spring-wound auto-rewind mechanism with a locking ratchet brake.
Interstate Pneumatics HR44-020 1/4 Inch 20 ft long w/1/4 Inch NPT Swivel Fittings, Recoil Orange Polyurethane Hose
- This recoil air hose is suitable for industrial, contractor, or household use with air compressors, nailers, sprayers, and staple guns, among other pneumatic tools — features high kink resistance, undamaged by twisting or crushing | extreme flexibility, 25% more stretchable than nylon hoses of the same length | excellent cold resistance, to temperature as low as -40 °f | superb abrasion resistance, 6-10 times more than nylon or rubber hose | chemical resistance, gasoline, oil and ozone resistance | swivel fittings with rubber boot | automatically retract when not in use, which eliminates the possibility of hazards caused by loose hoses on the work floor. The swivel ends are perfect in preventing kinks when attaching an air-powered tool. These polyurethane recoil hoses bear great abrasion, ultraviolet (uv) radiation, oil, electrical and chemical resistance. Their low weight in comparison to regular pvc and rubber hoses makes them a favorite for all industrial, construction and automotive applications. Our recoil air hoses come standard with 1/4 inch swivel male national pipe threads (npt) end connections on both ends. The polyurethane construction also resists weather, ozone, and heat damage, doesn’t cause marring to sensitive surfaces, and weighs less than hoses made of other materials. These hoses provide you with the highest quality and the most extensive offering of recoil hoses in the industry. Finest polyurethane material is used which provides maximum resistance to oil, grease and abrasion. These polyurethane recoil hoses are made from a special super tough polyurethane compound for consistent performance.
Interstate Pneumatics HR44-015 1/4 Inch 15 ft long w/1/4 Inch NPT Swivel Fittings, Recoil Orange Polyurethane Hose
- This recoil air hose is suitable for industrial, contractor, or household use with air compressors, nailers, sprayers, and staple guns, among other pneumatic tools — features high kink resistance, undamaged by twisting or crushing | extreme flexibility, 25% more stretchable than nylon hoses of the same length | excellent cold resistance, to temperature as low as -40 °f | superb abrasion resistance, 6-10 times more than nylon or rubber hose | chemical resistance, gasoline, oil and ozone resistance | swivel fittings with rubber boot | automatically retract when not in use, which eliminates the possibility of hazards caused by loose hoses on the work floor. These polyurethane recoil hoses are made from a special super tough polyurethane compound for consistent performance. These polyurethane recoil hoses bear great abrasion, ultraviolet (uv) radiation, oil, electrical and chemical resistance. Our recoil air hoses come standard with 1/4 inch swivel male national pipe threads (npt) end connections on both ends. These hoses provide you with the highest quality and the most extensive offering of recoil hoses in the industry. Finest polyurethane material is used which provides maximum resistance to oil, grease and abrasion. The polyurethane construction also resists weather, ozone, and heat damage, doesn’t cause marring to sensitive surfaces, and weighs less than hoses made of other materials. Their low weight in comparison to regular pvc and rubber hoses makes them a favorite for all industrial, construction and automotive applications. The swivel ends are perfect in preventing kinks when attaching an air-powered tool.
Interstate Pneumatics HR14-025 Yellow Polyurethane Recoil Hose 1/4 Inch x 25 Feet Swivel Fittings
- Their low weight in comparison to regular pvc and rubber hoses makes them a favorite for all industrial, construction and automotive applications. The polyurethane construction also resists weather, ozone, and heat damage, doesn’t cause marring to sensitive surfaces, and weighs less than hoses made of other materials. Finest polyurethane material is used which provides maximum resistance to oil, grease and abrasion. These polyurethane recoil hoses are made from a special super tough polyurethane compound for consistent performance. These polyurethane recoil hoses bear great abrasion, ultraviolet (uv) radiation, oil, electrical and chemical resistance. This recoil air hose is suitable for industrial, contractor, or household use with air compressors, nailers, sprayers, and staple guns, among other pneumatic tools — features high kink resistance, undamaged by twisting or crushing | extreme flexibility, 25% more stretchable than nylon hoses of the same length | excellent cold resistance, to temperature as low as -40 °f | superb abrasion resistance, 6-10 times more than nylon or rubber hose | chemical resistance, gasoline, oil and ozone resistance | swivel fittings with rubber boot | automatically retract when not in use, which eliminates the possibility of hazards caused by loose hoses on the work floor. The swivel ends are perfect in preventing kinks when attaching an air-powered tool. Our recoil air hoses come standard with 1/4 inch swivel male national pipe threads (npt) end connections on both ends. These hoses provide you with the highest quality and the most extensive offering of recoil hoses in the industry.
Interstate Pneumatics HRPZ24-1 1/4″ Reusable Swivel hose end fitting for 1/4″ NPT Polyurethane Hose (HU14 Series)
- The polyurethane construction also resists weather, ozone, and heat damage, does not cause marring to sensitive surfaces, and weighs less than hoses made of other materials. This recoil air hose is suitable for industrial, contractor, or household use with air compressors, nailers, sprayers, and staple guns, among other pneumatic tools. Their low weight in comparison to regular pvc and rubber hoses makes them a favorite for all industrial, construction and automotive applications. These polyurethane recoil hoses are made from a special super tough polyurethane compound for consistent performance. The swivel ends are perfect in preventing kinks when attaching an air-powered tool. Our recoil air hoses come standard with 1/4 inch swivel male national pipe threads (npt) end connections on both ends. These hoses provide you with the highest quality and the most extensive offering of recoil hoses in the industry. Finest polyurethane material is used which provides maximum resistance to oil, grease and abrasion. These polyurethane recoil hoses bear great abrasion, ultraviolet (uv) radiation, oil, electrical and chemical resistance.
Coilhose Pneumatics PU14-5B-G Flexcoil Polyurethane Coiled Air Hose, 1/4-Inch ID, 5-Foot Length with (2) 1/4-Inch Reusable Strain Relief MPT Swivel Fittings, Neon Green
- Straight tails for increased life of fittings and hose ends. Coiled polyurethane hose for a wide range of industrial applications. Two 1/4″ factory-installed, brass reusable strain relief male npt swivel fittings. Single-layer polyurethane tube for durability, persistent coil memory, flexibility in cold weather, and resistance to weathering, abrasion, oil, and kinks. Temperature range of -40 to +165 degrees f.
Interstate Pneumatics HR24-050 1/4 Inch 50 ft long w/1/4 Inch NPT Swivel Fittings, Recoil Translucent Blue Polyurethane Hose
- These polyurethane recoil hoses are made from a special super tough polyurethane compound for consistent performance. Finest polyurethane material is used which provides maximum resistance to oil, grease and abrasion. These hoses provide you with the highest quality and the most extensive offering of recoil hoses in the industry. These polyurethane recoil hoses bear great abrasion, ultraviolet (uv) radiation, oil, electrical and chemical resistance. This recoil air hose is suitable for industrial, contractor, or household use with air compressors, nailers, sprayers, and staple guns, among other pneumatic tools — features high kink resistance, undamaged by twisting or crushing | extreme flexibility, 25% more stretchable than nylon hoses of the same length | excellent cold resistance, to temperature as low as -40 °f | superb abrasion resistance, 6-10 times more than nylon or rubber hose | chemical resistance, gasoline, oil and ozone resistance | swivel fittings with rubber boot | automatically retract when not in use, which eliminates the possibility of hazards caused by loose hoses on the work floor. The polyurethane construction also resists weather, ozone, and heat damage, doesn’t cause marring to sensitive surfaces, and weighs less than hoses made of other materials. Their low weight in comparison to regular pvc and rubber hoses makes them a favorite for all industrial, construction and automotive applications. The swivel ends are perfect in preventing kinks when attaching an air-powered tool. Our recoil air hoses come standard with 1/4 inch swivel male national pipe threads (npt) end connections on both ends.
uxcell 10mm x 6.5mm Orange Red Pneumatic Polyurethane Hose PU Tube 10M 32.8Ft
- Product name pu tubematerial polyurethane(pu). Outside diameter 10mm/ 039″inside diameter 65mm/ 026″. Package content 1 x pu tube. Wall thickness 2mm/ 0079″total length 10m/ 328ft. Color orange redweight 557g.
Interstate Pneumatics HR24-015 1/4 Inch 15 ft long w/1/4 Inch NPT Swivel Fittings, Recoil Translucent Blue Polyurethane Hose
- The swivel ends are perfect in preventing kinks when attaching an air-powered tool. The polyurethane construction also resists weather, ozone, and heat damage, doesn’t cause marring to sensitive surfaces, and weighs less than hoses made of other materials. Our recoil air hoses come standard with 1/4 inch swivel male national pipe threads (npt) end connections on both ends. This recoil air hose is suitable for industrial, contractor, or household use with air compressors, nailers, sprayers, and staple guns, among other pneumatic tools — features high kink resistance, undamaged by twisting or crushing | extreme flexibility, 25% more stretchable than nylon hoses of the same length | excellent cold resistance, to temperature as low as -40 °f | superb abrasion resistance, 6-10 times more than nylon or rubber hose | chemical resistance, gasoline, oil and ozone resistance | swivel fittings with rubber boot | automatically retract when not in use, which eliminates the possibility of hazards caused by loose hoses on the work floor. These polyurethane recoil hoses are made from a special super tough polyurethane compound for consistent performance. Finest polyurethane material is used which provides maximum resistance to oil, grease and abrasion. These polyurethane recoil hoses bear great abrasion, ultraviolet (uv) radiation, oil, electrical and chemical resistance. These hoses provide you with the highest quality and the most extensive offering of recoil hoses in the industry. Their low weight in comparison to regular pvc and rubber hoses makes them a favorite for all industrial, construction and automotive applications.
URBEST Polyurethane 4mm x 2.5mm Black 10M / 32.8Ft PU 0.7mm wall thickness Air Hose Tube
- Wall thickness 07mm / 0027″ net weight 107g. Product name polyurethane hose tube total length 10m / 328ft. Color black material polyurethane(pu). Package included 1 x polyurethane hose tube. Inside diameter 25mm / 0098″ outside diameter 4mm / 0157″.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
