SDS+ Masonry Carbide Tipped Drill Bits 1/4 x 6-3/8 (Box of 1) BC-SDS14638
- For drilling glass, ceramic and tile. Power tools vermont american 7/8″ x 12″ masonry carbide tipped drill bit 2608682866 bulk#0047/43. Unique spear point design. Tungsten carbide tipped,.
SDS+ Masonry Carbide Tipped Drill Bits 3/16 x 4-3/8 (Box of 1) BC-SDS316438
- Optimized flute design to reduce stress and make the bit run cooler. 4-flute design for fast dust removal. Optimized brazing and hardening process for long life in reinforced concrete.
16 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- Drop forged steel construction. 2 of each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″.
2 Pack Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit
- For drilling glass, ceramic and tile. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. Carded.
3/8″ X 12″ Spline Shank Carbide Tipped Drill Bit
- They are approximately a 3/4″ diameter shank. These are the spline shank rotohammer bits. These top quality bits are designed for long life and fast cutting through the toughest concrete.
SDS+ Masonry Carbide Tipped Drill Bits 3/16 x 6-3/8 (Box of 1) BC-SDS316638
- Unique spear point design. Tungsten carbide tipped,. For drilling glass, ceramic and tile. Power tools vermont american 7/8″ x 12″ masonry carbide tipped drill bit 2608682866 bulk#0047/43.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 1/2″ Size, 3-6/16″ Cutting Length
- Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats.
M34 Arbor W/Carbide Tipped Drill
- Repeatable results with built-in measuring scales. Reliable drilling with bit guide and stop collar. Simple to use with any drill-no special tools needed. Accurate hinge positioning with built-in indexing tabs. Adjustable cams ensure proper hinge offset.
Power Tools Vermont American 7/8″ x 12″ Masonry Carbide Tipped Drill Bit 2608682866 Bulk
- Unique spear point design. Power tools vermont american 7/8″ x 12″ masonry carbide tipped drill bit 2608682866 bulk#0047/43. For drilling glass, ceramic and tile. Tungsten carbide tipped,.
Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit
- Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. . For drilling glass, ceramic and tile. Carded.
Powers Fastening Innovations 00514 Hd-Straight Shank Carbide Tipped Drill, 1/4-Inch by 13-Inch, 1 Per Box
- Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921. Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. .
Irwin 50508 Hanson 1/8 Glass and Tile Carbide Tipped Drill Bit by Irwin Tools
- Drill bit for use with pocket hole joinery. Larger diameter creates flat-bottomed hole. Irwin 50508 hanson 1/8 glass and tile carbide tipped drill bit. Recommended for use with corded high-rpm drills.
Precision Twist Q D444 Carbide-Tipped Drill 118 Deg HSS 3 7/16″ Flute 4 3/4″ L
- Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips.
32 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- 4 of each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″. Drop forged steel construction.
SDS+ Masonry Carbide Tipped Drill Bits 1/4 x 8-5/8 (Box of 1) BC-SDS14858
- 4-flute design for fast dust removal. Optimized brazing and hardening process for long life in reinforced concrete. Optimized flute design to reduce stress and make the bit run cooler.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 1/2″ Size
- Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Whistle notch shank offers the increased grip of a cylindrical shank and additional stability with the small angle of its flat. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel than an uncoated drill bit.
Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit
- For drilling glass, ceramic and tile. . Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking.
1/2″ X 18″ Spline Shank Carbide Tipped Drill Bit
- These top quality bits are designed for long life and fast cutting through the toughest concretethere isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. They are approximately a 3/4″ diameter shank. Spline shank carbide tipped bits made in usa very high quality finest materials available stocked in many sizes perfect for both industrial and commercial usethese are the spline shank rotohammer bits.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
