24 Oct 2018
Best and Coolest 22 Raised Panel Router Bits
Magnate 3894 Raised Panel Router Bit, Horizontal – 25 degree Face Cut Profile; 1-7/32″ Reveal - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.
Yonico 12143 Raised Panel Router Bit with Backcutter 1/2-Inch Shank - Industrial quality router bits. Satisfaction guaranteed & lifetime warranty. Build-up & heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design. C3 micro-grain tungsten carbide cutters.
Yonico 12147q Raised Panel Vertical Router Bit with Medium Ogee 1/4-Inch Shank - Industrial quality router bits. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed & lifetime warranty. Build-up & heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design.
Woodline USA WL 1421 Ogee with Step Cove Raised Panel Router Bit - 3-1/2″ raised panel cutter with a 1/2″ shank. Ogee with a step cove profile. C3 micro-grain tungsten carbide cutters. Two flute carbide design. Heat resistant teflon coating.
MLCS Raised Panel Router Bit: Cove Profile - Ideal for cabinet doors. 2-flute, carbide-tipped with totally-enclosed ball bearing guide. . Produces a graceful concave raised panel. 3-1/2″ large diameter.
Rockler Ogee Horizontal Raised Panel Router Bit, 2-1/2″ Diameter x 5/8″H - Horizontal panel raising bits must be run at a slower rpm. Our panel raising bits are manufactured with a shear angle that is optimized for the smoothest possible cuts, both with and across the grain. The bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. The horizontal orientation combined with the bearing guide allows you to raise panels for doors with arched or cathedral rails.
MLCS Raised Panel Router Bit: 45 Degree Shaker Bevel Profile - Create classic shaker style furniture with a 1/2″ deep tongue. 2-flute, carbide-tipped with totally-enclosed ball bearing guide. This bit is used for thomas moser style shaker furniture. 2-3/4″ large diameter.
3 Wing Flat Raised Panel Router Bit With Cove & Bead Stile & Rail Cutters – 3 PC Set - Includes wooden storage box. This carbide router bit set cut smooth in hardwoods and softwoods. All bits have a 1/2″ shank and are designed to be used on 3/4″ stock. Raised panel bit sets are designed to be used in a router table only.
MLCS Raised Panel Router Bit: 67.5 Degree Shaker Bevel Profile - 2-1/8″ large diameter. Create classic shaker style furniture with a 1/2″ deep tongue. 2-flute, carbide-tipped with totally-enclosed ball bearing guide.
MLCS Vertical Raised Panel Router Bit: 18 Degree Straight Profile - 2-flute carbide-tipped bit is designed to give you a full 1-1/4″ or larger reveal on your panels with a bit that measures only 1-1/8″ in diameter. For use on 3/4″ thick stock. For use in a router table. 1-1/2″ carbide height. . Vertical panel bit allows you to raise panels quickly and easily.
Bosch 85638M Ogee Raised Panel Cutter 2-3/4-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit - This bit is used for making an attractive ogee design in raised panel doors and paneling. . Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. The fully hardened and tempered steel shank provides ultimate durability.
Yonico 12140 Raised Panel Router Bit with Ogee and Bead 1/2-Inch Shank - Two flute carbide cutters & 1/2″ shank. Use the panel raiser in conjunction with any one of our rail and stile router bits. The yonico panel raiser router bit 12140 will make raised panels for cabinet doors in an elegant ogee & bead design.
MLCS Raised Panel Router Bit: 25 Degree Profile - 1-5/8″ large diameter. Produces a standard provincial style raised panel. 2-flute, carbide-tipped with totally-enclosed ball bearing guide. Ideal for cabinet doors and to create a raised panel effect on drawer fronts.
MLCS Raised Panel Router Bit with Undercutter: Shaker Profile - 2 flute, carbide-tipped with fully enclosed ball bearing guide for 5/8″-1″ stock. Depth of cut is 1-1/4″. 2-1/2″ large diameter. Cuts the back and front of the panel with one bit. Simple but elegant shaker profile is a classic furniture design. The undercutter panel bit lets you produce flush panels, adds a radius to the back sides of panels for decorative appearance or reduces the exposed upper panel profile.
Freud 97-254 3 Piece Door Set with Premier 99-761 Rail and Stile System and 99-520 Raised Panel Router Bit - This set allows the woodworker to build doors from 5/8 inch to 1-1/4 inch thickness and any length long tenon construction for rock-solid joints that last a lifetime. Bit features freud’s tico hi-density carbide to maximize bit life and material finish. This set features freud’s 99-520 2 + 2 raised panel bit two small wings that cut downward and two large wings that shear upward, produce an extremely smooth cut in hardwoods, softwoods and even plywoods. Optional cutters are available for double sided profile doors (99-861) and glass panel doors (54-760). Bit feature freud’s perma-shield coating that reduces heat and pitch build up along with rust.
Magnate 3805B Raised Panel Router Bit, Horizontal – Ogee Profile; 1-1/2″ Reveal - Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. . It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage.
Yonico 12135 Raised Panel Router Bit with Backcutter Cove 3-1/4-Inch Diameter 1/2-Inch Shank - Two flute carbide cutters and 1/2″ shank. The yonico cove panel raiser router bit with back cutter will cut cove raised panels easily while reducing the tongue thickness to 1/4″. • Back cutter, 2″ diameter x 1/4″ cutter height • front cutter, 3-1/4″ diameter x 9/16″ cutter height. Use with 5/8″-1″ stock.
MLCS Raised Panel Router Bit with Undercutter: Cove Profile - Depth of cut is 1-1/4″. The undercutter panel bit lets you produce flush panels, adds a radius to the back sides of panels for decorative appearance or reduces the exposed upper panel profile. Cuts the back and front of the panel with one bit. 2 flute, carbide-tipped with fully enclosed ball bearing guide for 5/8″-1″ stock. 3-1/8″ large diameter. .
MLCS Raised Panel Router Bit: Cove Profile - 2″ large diameter. Ideal for cabinet doors. Produces a graceful concave raised panel. 2-flute, carbide-tipped with totally-enclosed ball bearing guide.
Yonico 12336 Raised Panel Router Bit Door Set with Round Over and Ogee Panel Raiser 1/2-Inch Shank - Use with up to 1″ stock. The ogee raised panel bit puts a beautiful edge on the central panel of your door. All router bit shanks in this set are 1/2″. Rail and stile bits create a perfectly matched rail and stile door frame. Ball bearing guides allow for precise cuts without the use of a fence. Set comes in a solid wood storage case. The yonico 12336 cabinet door router bit set includes rail and stile bits in classic round over design with a standard ogee panel raiser.
Yonico 12133 Raised Panel Router Bit with Cove Door 3-1/8-Inch Diameter 1/2-Inch Shank - . Use in conjunction with any of our yonico rail and stile router bits. Two flute carbide cutters & 1/2″ shank. The yonico panel raiser router bit 12133 will cut raised panels for cabinet doors in the popular cove design.
Warrior 3 Piece Doormaker Stile / Raised Panel Router Bit Set - Raised panel router bits for custom woodwork this high quality set of router bits is ideal for doors, panels and other, visit harbor freight tools for more information. .
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.