Best and Coolest 16 Insert Tools

 

Stahlwille 725QR-10 QuickRelease Ratchet Insert Tool 12 Drive 145mm Height 29mm Width Size 10

Stahlwille 725QR-10 QuickRelease Ratchet Insert Tool, 1/2″ Drive, 14.5mm Height, 29mm Width, Size 10

Stahlwille 725QR-10 QuickRelease Ratchet Insert Tool, 1/2″ Drive, 14.5mm Height, 29mm Width, Size 10 - Please note insert size (9×12, 14×18, etc. When matching torque wrench with insert tool. These insert tools are for use with torque wrenches.

 

L722-516-18 HEX HAND WRENCH THREADED INSERT TOOL FOR 516-18 INSERTS RIVET-NUTS WILL SET ALUMINUM STEEL STAINLESS INSERTS

L722-5/16-18 HEX HAND WRENCH THREADED INSERT TOOL FOR 5/16-18 INSERTS & RIVET-NUTS. WILL SET ALUMINUM, STEEL & STAINLESS INSERTS.

L722-5/16-18 HEX HAND WRENCH THREADED INSERT TOOL FOR 5/16-18 INSERTS & RIVET-NUTS. WILL SET ALUMINUM, STEEL & STAINLESS INSERTS. - L722-5/16-18 hex hand wrench threaded insert tool for 5/16-18 inserts & rivet-nuts. . Will set aluminum, steel & stainless inserts.

 

Sherline 2267 - Carbide ThreadingGrooving Insert Tool Holder

Sherline 2267 – Carbide Threading/Grooving Insert Tool Holder

Sherline 2267 – Carbide Threading/Grooving Insert Tool Holder - . When used for cutting grooves, you have your choice of using p/n 2269 insert (. Using p/n 2268 60 degree threading insert, the tool can be used for cutting outside threads. 031″ wide), or p/n 2270 insert (. This is a 3/8″ square shank that requires a p/n 7600 tool post assembly. 062″ wide). Included with the tool is a 7/32″ hex key for tightening the 6-32 screw that locks the special clamp in place on the insert. Sherline 2267, carbide threading/grooving insert tool holderthe carbide threading/grooving insert tool holder accepts 2-sided carbide inserts that can do a couple of tasks.

 

RT-806 SPIN  SPIN AIR PNEUMATIC TREADED INSERT TOOL WITH AN ADJUSTABLE CLUTCH 4-40 6-32 8-32 10-24 10-32 14-20 AND 14-28 SET-UPS IN A RUGGED HARDSHELL CASE

RT-806 SPIN / SPIN AIR PNEUMATIC TREADED INSERT TOOL WITH AN ADJUSTABLE CLUTCH & 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, AND 1/4-28 SET-UPS, IN A RUGGED HARDSHELL CASE.

RT-806 SPIN / SPIN AIR PNEUMATIC TREADED INSERT TOOL WITH AN ADJUSTABLE CLUTCH & 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, AND 1/4-28 SET-UPS, IN A RUGGED HARDSHELL CASE. - Rt-806 spin / spin air pneumatic treaded insert tool with an adjustable clutch & 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, and 1/4-28 set-ups, in a rugged hardshell case. .

 

YUFU-Diamond shape Carbide Replacement Insert Cutter 10mm39X28mm110Diameter 43mm17  Pack of 10 For Mini Mid Full And Pro Size Detailers Lathe Wood Turning Cutting Tools

YUFU-Diamond shape Carbide Replacement Insert Cutter 10mm(.39″)X28mm(1.10″),Diameter 4.3mm(.17″) , Pack of 10, For Mini, Mid Full And Pro Size Detailers Lathe Wood Turning Cutting Tools

YUFU-Diamond shape Carbide Replacement Insert Cutter 10mm(.39″)X28mm(1.10″),Diameter 4.3mm(.17″) , Pack of 10, For Mini, Mid Full And Pro Size Detailers Lathe Wood Turning Cutting Tools - Made of solid tungsten carbide, providing you a better experience and durable use. 30 degree cutting angle , mount with #4-40 8mm flat head screw. Size diamond shape 10mm (39″) x 28mm(110″) , thickness 25mm (10″) , dia 43mm(17″). Optimal grinding process produces the flattest and smoothest cutting surface. Holds a cutting edge up to 20 times longer than hss,10 pcs per pack, save more .

 

Stahlwille 73740 Blank End Insert Tools 215mm Height 12mm Length Size 40

Stahlwille 737/40 Blank End Insert Tools, 21.5mm Height, 12mm Length, Size 40

Stahlwille 737/40 Blank End Insert Tools, 21.5mm Height, 12mm Length, Size 40 - Welding surface h x b mm, 11 x 25. Gunmetal finish. Size 14×18, use with insert size 14×18 torque wrench only. Instructions provided with insert. Blank end insert tool.

 

Backer Rod Insert Tool

Backer Rod Insert Tool

Backer Rod Insert Tool - 2 millimeter) o. 7 millimeter. The proper insertion of backer rod into the joint is imperative to proper joint sealing. The nylon wheel won’t damage the backer rod, or scratch adjacent channel walls. Easily works with closed cell backer rod or open cell backer rod this backer rod insert tool is the quickest, easiest and safest way to install backer rod. The wheel has a 2-1/4 inch (57. And width of 1-3/4 inch (44. The handle length is 10-3/4 inches (273 millimeters) with a handle width of 1/2 inch (12. D. 5 millimeter).

 

516 - 18 tpi Power Drive Threaded Insert Tool

5/16″ – 18 tpi Power Drive Threaded Insert Tool

5/16″ – 18 tpi Power Drive Threaded Insert Tool - Choose the right tool for your job for driving threaded inserts with slotted heads accurately and quickly, choose the power drive threaded insert tool. Works with most variable-speed drills. Recommended for inserts with screwdriver slot at the top.

 

LH and RH carbide insert tool holder set

LH and RH carbide insert tool holder set

LH and RH carbide insert tool holder set - Includes both 2256 (rh) and 2257 (lh) holders at a price savings compared to buying separately. Cutters offset 35° to side for turning and facing. Use with optional p/n 7600 tool post. Uses p/n 7605 replacement carbide tips. Includes 55° carbide inserts, torx screws and wrench for each holder.

 

L722-38-16 HEX HAND WRENCH THREADED INSERT TOOL FOR 38-16 INSERTS RIVET-NUTS WILL SET ALUMINUM STEEL STAINLESS INSERTS

L722-3/8-16 HEX HAND WRENCH THREADED INSERT TOOL FOR 3/8-16 INSERTS & RIVET-NUTS. WILL SET ALUMINUM, STEEL & STAINLESS INSERTS.

L722-3/8-16 HEX HAND WRENCH THREADED INSERT TOOL FOR 3/8-16 INSERTS & RIVET-NUTS. WILL SET ALUMINUM, STEEL & STAINLESS INSERTS. - Great for low volume users and limited space applications. A unique hand tool to install or tighten blind threaded inserts. Great for field installations, repair work or prototype applications. Designed for both thick and thin wall threaded inserts. Lightweight, easy to handle.

 

CRL Straight Tip Filler Strip Insert Tool for Offroad Equipment

CRL Straight Tip Filler Strip Insert Tool for Offroad Equipment

CRL Straight Tip Filler Strip Insert Tool for Offroad Equipment - These locking strip tools are used primarily for large windshield gasket locking strips found in trucks, buses, farm and off-road equipment. The tool is available in three models, straight, left, and right hand. .

 

L845-M6 HEX HAND WRENCH THREADED INSERT TOOL FOR M6 INSERTS RIVET-NUTS WILL SET ALUMINUM STEEL STAINLESS INSERTS

L845-M6 HEX HAND WRENCH THREADED INSERT TOOL FOR M6 INSERTS & RIVET-NUTS. WILL SET ALUMINUM, STEEL & STAINLESS INSERTS.

L845-M6 HEX HAND WRENCH THREADED INSERT TOOL FOR M6 INSERTS & RIVET-NUTS. WILL SET ALUMINUM, STEEL & STAINLESS INSERTS. - Designed for both thick and thin wall threaded inserts. Lightweight, easy to handle. Great for low volume users and limited space applications. Great for field installations, repair work or prototype applications. A unique hand tool to install or tighten blind threaded inserts.

 

Stahlwille 73140-24 Open End Insert Tool Size 40 24mm Diameter 53mm Width 12mm Height

Stahlwille 731/40-24 Open End Insert Tool, Size 40, 24mm Diameter, 53mm Width, 12mm Height

Stahlwille 731/40-24 Open End Insert Tool, Size 40, 24mm Diameter, 53mm Width, 12mm Height - Please note insert size (9×12, 14×18, etc. Com for stahlwille torque wrenches and other insert tool options. This part is for use with torque wrenches that accept interchangeable insert tools. ) When matching torque wrench with insert tool. Search amazon.

 

Surebonder 8510 6-32 8-32 10-24 10-32 14-20 Threaded Insert Tool

Surebonder 8510 6-32, 8-32, 10-24, 10-32, 1/4-20 Threaded Insert Tool

Surebonder 8510 6-32, 8-32, 10-24, 10-32, 1/4-20 Threaded Insert Tool - Comes with 5 threaded mandrels and nosepieces. The product is easy installation and easy handling. Nosepiece sizes included 6-32, 8-32, 10-24, 10-32, 1/4-20. Inserts sold separately. The product is manufactured in china. Comfort grip. Inserts into thin metal, plastic or fiberglass. The product is easy to use and highly durable.

 

YUFU-TOOL Wood Working Reversible Replacement Carbide lathe tool Insertsknives cutter 15mm length X15mm widthX25mm thickness  Pack of 10 Designed for SpiralHelical Planer Cutter Head

YUFU-TOOL Wood Working Reversible Replacement Carbide lathe tool Inserts/knives cutter (15mm length X15mm widthX2.5mm thickness ) ,Pack of 10, Designed for Spiral/Helical Planer Cutter Head

YUFU-TOOL Wood Working Reversible Replacement Carbide lathe tool Inserts/knives cutter (15mm length X15mm widthX2.5mm thickness ) ,Pack of 10, Designed for Spiral/Helical Planer Cutter Head - Easy to replace your jointers and planers, excellent accessory for wood surfacing planing and turning work. Designed for numerous spiral/helical planer cutter head system. Holds a cutting edge up to 20 times longer than hss. Four usable sides(15mmx15mm), and all are of the same sharpness. Made of solid tungsten carbide, providing you a better experience and durable use.

 

AA181-616 AVK MANUAL INSERT TOOL 38-16  PACK OF 1

AA181-616, AVK, MANUAL INSERT TOOL 3/8-16, , PACK OF 1

AA181-616, AVK, MANUAL INSERT TOOL 3/8-16, , PACK OF 1 - Product> avk installation systems. A unique hand tool to install or tighten blind threaded inserts.