Magnate 1157 Face-Inlay Router Bits – 1/2″ Cutting Height; 3-1/2″ Overall Length
- Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. Brass. The cutting depth of all bits is 1/8″. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. E. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Used for inlaying wood veneer, and other material i.
Freud 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-023
- Ideal for decorative inlay work in solid surface countertops. Use on hand-held portable routers. . Application cuts all solid surface materials, hardwood and other composite materials.
StewMac Carbide Downcut Inlay Router Bit, 3/32″ (2.38mm) diameter
- Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Comes in sturdy protective case, with bit cutting diamater size clearly marked. For inlay routing and bridge saddle slots. Solid carbide lasts far longer than steel. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities.
MLCS 9177 Brass Router Inlay Kit with Router Bit
- Create precisely matched inlays by simply removing the bushing. A 1/8″ downcut solid carbide spiral bit (1/8″ shank with 1/4″ adaptor bushing) is also included. This easy to use inlay kit follows a 3/16″ thick pattern template of almost any shape to produce the recess. . Note bowtie inlay pattern is not included. This solid brass inlay kit will fit your porter cable®, black & decker or any router with a manufacturer supplied adaptor for porter cable® bushings. Kit includes a brass bushing, brass template guide and brass retainer nut.
Replacement Inlay Router Bit
- . Replacement router bit for the rockler inlay system (#25229, sold separately) and the inlay bushing and bit (#27593, sold separately).
StewMac Carbide Downcut Inlay Router Bit, 1/8″ (3.18mm) diameter
- Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Solid carbide lasts far longer than steel. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). For inlay routing and bridge saddle slots.
Magnate 1171 Side Face-Inlay Router Bits – 1/8″ Cutting Height; 5″ Shank Length
- Bow front drawer. Used for inlaying wood veneer, and other materials i. In case a bit doesn’t come with a speed chart. The cutting depth of all bits is 1/8″. It is suited for softwoods, hardwoods, chipboard, plywood and etc. E. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. By replacing the original bearing, br-05, the rabbet depth varies as follows original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ shank length is measured from middle of the knife to the end of the shank. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. E. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Brass on either spindle stock up to 8″ in diameter, or flat stock up to 4″ wide that has a curved profile i. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Designed for the legacy ornamental mill.
Freud 85-029 3/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-029 3/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-029
- Application cuts all solid surface materials, hardwood and other composite materials. Ideal for decorative inlay work in solid surface countertops. Use on hand-held portable routers.
Bosch 85655M 3/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by Bosch
- Recommended for use with a routing tableall bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router.
Bosch 85655M 3/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
StewMac Carbide Downcut Inlay Router Bit, 1/32″ (0.79mm) diameter
- Solid carbide lasts far longer than steel. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). For fine detail inlay routing. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities.
Magnate 1159 Face-Inlay Router Bits – 3/4″ Cutting Height; 3-1/2″ Overall Length
- It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting depth of all bits is 1/8″. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Brass. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Used for inlaying wood veneer, and other material i. You may try the following suggestion. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips. E.
Freud 85-017 1/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-017 1/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-017
- Use on hand-held portable routers. Ideal for decorative inlay work in solid surface countertops. . Application cuts all solid surface materials, hardwood and other composite materials.
PORTER-CABLE 43907 3/4-Inch Inlay Router Bit, 1/2-Inch Shank, Carbide-Tipped
- 2 flute carbide tipped 3/4″ cutting height 3-1/2″ overall length 1/2″ shank diameter. 7/8″ overall diameter.
Freud 85-025 1/2-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-025 1/2-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-025
- Covered by freud’s limited lifetime warranty. These inlay bits are for the craftsman who wants to do decorative inlay work in solid surface counter tops.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
