Best 24 Router Plates

 

5MM ROUTER BASE PLATE CENTERING SYSTEM - Your router plate should be the standard 1-3/8″ recessed hole that accepts porter cable style bushing. Fits elu 3304, hitachi tr12-m12v. Makita 3601-360 ryobi 150-151. This screw size may fit other routers not listed be sure to check your router base screw size. Screw size m5.

 

Woodhaven 101A Router Plate Starting Pin - . The starting pin provides leverage to help control the work as you start to feed work into the bit, for use with woodhaven router plates or your own plate.

 

MLCS 9338 All-In-one Router Plate Kit - Note 1-3/16″ opening is designed to hold porter cable (r) style guide bushings. 3/8″ thick phenolic router plate supports any router. Also includes concentric rings on bottom of plate for easy alignment when installing your router. 2 removable rings give three different bit openings (3-7/8″, 2-5/8″, 1-3/16″). The steel starting guide pin allows routing curved work. Includes magnets and adjusting screws for securing and leveling the plate. The plate is approximately 9″ x 12″ with pre-drilled table mounting holes.

 

Premium Phenolic Router Plate 9-1/4″ x 11-3/4″ By Peachtree Woodworking PW3054 - Phenolic 318″ (approx) thick router plate. Includes a shoulder pin for freehand work. Unique cam adjusters to insure a perfect fit in your router table. Threaded allen wrench inserts in each corner for leveling and adjustments. Snap out rings for openings of 3 7/8″, 2 5/8″ & 1 1/4″.

 

Bench Dog Tools 10-067 Center Mortising Router Plate - Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises. . Simply straddle the board between the pins and cut your mortise – perfectly centered every time plate is constructed of 1/4-inch acrylic with 1-1/2-inch opening, and is transparent for visibility.

 

Woodpeckers Precision Woodworking Tools AITRITON Router Mounting Plate - Multiple starting pin locations and 3 twist-lock rings and a locking wrench included with each router plate. Strong, stiff and smooth made from cast, precision machined aluminum. A pair of adjustable edge plungers enable you to eliminate any slop between the router plate and the plate opening. Cast aluminum pre-drilled for triton models jof-001, mof-001, trc-001 and tra-001 routers. Easy, exact leveling getting this plate exactly level is easy thanks to 8 top accessible fine-pitch leveling set screws.

 

Rockler Router Plate Insert With 1-1/2″ Opening For Large Plates - The 4-3/8” od allows this insert to fit into a large opening plate with a 3-11/16” opening. The interchangeable insert for standard bits features a 1-1/2” opening.   Fits the following router lifts rockler router lift fx (23194) bench dog® 40-150 prolift router adjustment system (28827)   fits the following rockler router table plates rockler router plate c porter cable 7518porter cable 7519porter cable 7538porter cable 7539milwaukee 5625-20triton tra001triton mof001 rockler router plate d bosch 1619-1619evfreud ft2000dewalt 625.

 

NEW Rockler Router Plate Template, 8-1/4” X 11-3/4” - Optional router plate leveling and locking hardware pack sold separately. We suggest using our 1/2″ pattern cutting bit #33536 (sold separately, but other 1/2″ pattern bits also work. With an 8-1/4″ x 11-3/4″ design, it is perfectly sized for rockler router plates and bench dog router plates. Templates are made of 1/2″ mdf material. Instructions are permanently affixed to the template. For best results, mount the template to the desired location of the router plate installation using double-face tape (sold separately). Get a custom fit for your router table plate with this easy-to-use template.

 

Rockler Router Plate Insert With 2-1/2 inch Opening For Standard Plates - 5 weight (lbs) 0. Opening 2-1/2″ outer diameter 4″manufacturer part number tarti-2. 0600 .

 

MLCS 9098 OnPoint Version 2.0 Universal Laser Guided Router Plate - Now pre-drilled for common router models. Laser guided for pinpoint accuracy. New built-in led lights clearly illuminate your work area. Mlcs quality guaranteed.

 

MLCS 2394 Extension Router Table Top & Fence with Universal Router Plate - Router fence features 24″ long anodized aluminum angle to keep the fence at 90° for accuracy (within 010″/”). Aluminum t-trackslots and aluminum miter slot. High split fence allows edge routing for safer vertical routing. The heavy 1-3/8″ thick table tophas a durable 23-1/2″ x 27″ melamine surface, sturdy mdf core and polyethylene edges. Phenolic 12″ x 9″ routerplatewith removable rings that allow 3 different size openings.

 

Premium Aluminum Router Plate 9-1/4″ x 11-3/4″ By Peachtree Woodworking PW3054 - Threaded allen wrench inserts in each corner for leveling and adjustments. Snap out rings for openings of 3 7/8″, 2 5/8″ & 1 1/4″. Unique cam adjusters to insure a perfect fit in your router table. Aluminum precision machined to 318″ (approx) thick router plate. Includes a shoulder pin for freehand work.

 

Woodhaven 8395 Offset Router Plate for Full Size Routers - Large 366″ bit hole allows maxium visibility. Includes 8-32 & 10-24 mounting screws. Handy for full size router use when edge routing plate size approx 6-5/8″ wide x 12″ long. Fits fixed base of porter cable 690 & 892, bosch 1617-1618, dewalt dw616-618, makita rf1101, hitachi m12vc and milwaukee 5615 & 5616 also fits base of other routers with a porter cable type three hole bolt pattern router not included. Lifetime guarantee against defects in material or workmanship made in the usa.

 

Rockler Router Plate Insert Without Opening - Fits the following rockler router table plates rockler router plate a makita 1100milwaukee 5615-5624dewalt 616-618bosch 1617- 161rigid 2930 combo kithitachi m12vc (fixed & kit)bosch mrc23evskporter cable 690porter cable 890porter cable 7529porter cable 97529porter cable 8529 rockler router plate b dewalt dw621dewalt dw621kcraftsman standardfreud ft 1700efreud 1702 vcek. The interchangeable insert without an opening features a 4” od allowing this insert to fit into a standard plate with a 3-1/4” opening.

 

Woodhaven 99 Router Plate Template - Use this template to cut a rabbeted table plate opening, or a through table opening to use with our 9-1/4″ x 11-3/4″ router plate & levelers. Not as accurate as us machining the plate opening on our cnc machinery, but it’s the next best thing. Optional 25204 flush trim bit with a shank mounted pilot bearing works great with this template. 1/4″ thick mdf, instructions included.

 

MLCS 9099 Universal Router Plate for Porter Cable type Template Guides - – for porter cable style template guides- pre- drilled for most routers- centering pin included- easy mounting- 6- inch diameter.

 

MLCS 2397 Extension Cast Iron Router Table Top & Fence with Aluminum Router Plate - New features extra tall split fence, aluminum miter track and safety guard. Aluminum 12″ x 9″ router inserts with removable rings that allow 3 different size openings. Fence stores on 2 hooks under the router table when not in use. New durable plastic safety guard helps protect eyes.

 

Guide Bushing Router Plate - Easy, exact leveling getting this plate exactly level is easy thanks to 8 top accessible fine-pitch leveling set screws. A pair of adjustable edge plungers enable you to eliminate any slop between the router plate and the plate opening. Cast aluminum pre-drilled for triton models jof-001, mof-001, trc-001 and tra-001 routers. Multiple starting pin locations and 3 twist-lock rings and a locking wrench included with each router plate. Strong, stiff and smooth made from cast, precision machined aluminum.

 

FULTON UNIVERSAL ROUTER PLATE - Snap-in rings are interchangeable for easy transitions between multiple router applications. 6-1/2″ x 1/4″ thick aluminum plate with 2 easy to snap insert rings. Bosch- 1617, 1618, 1619, and 1619 evs routers. Will fit porter cable, 100, 690, 890, 7529, 8529 series. Dewalt, dw625, dw616, dw18 series makita, 1100 series hitachi- mv12vc series.

 

3-Piece Blank Router Plate Insert Rings - Each ring is molded of abs reinforced with polycarbonate. . Blank insert rings can be drilled or routed for a custom size.

 

Milescraft 1201 Base Plate / Bushing Set for Routers - Includes top hat adapter to convert other metal bushings into turnlocktm quick change bushings. Turnlocktm technology features fast tool free guide bushing exchanges on most routers. Tough polycarbonate baseplate can be modified with a drill or file to fit nonstandard routers. Durable guide bushings maintain consistent alignment with any router template shape. Includes 8 common bushing sizes 5/16″, 3/8″, 7/16″ 1/2″, 5/8″, 51/64″ and 7/16″ & 5/8″ extended nose.

 

Jasper 500J Model 500 Router Circle Cutting Jig Base Plate Adaptor - Accommodates common diameter guide bushings. Made from sturdy acrylic. Replaces your existing base plate. Predrilled for porter cable-style guide bushings.

 

Rockler Router Plate Insert With 1-1/2″ Opening For Standard Plates - Includes a shoulder pin for freehand work. Aluminum precision machined to 318″ (approx) thick router plate. Unique cam adjusters to insure a perfect fit in your router table. Threaded allen wrench inserts in each corner for leveling and adjustments. Snap out rings for openings of 3 7/8″, 2 5/8″ & 1 1/4″.

 

MLCS Woodworking Router Table Top and Fence with Phenolic Plate - 010″). Measuring tape on top of fence reads both right to left and left to right, allowing easy and convenient measurement. Threaded inserts are also provided on the bottom of the table top to mount to a leg set or cabinet. A guide pin is included and allows for freehand routing. T-slot allows the attachment of featherboards or jigs to the fence. For accuracy (machined to within. Table comes pre-installed with an aluminum miter slot to ensure accuracy and aluminum t-track slots to mount your router fence. Fence faces are mounted on a t-slot, allowing for independent adjustment and varied openings around the router bit. Router fence a 36″ long anodized aluminum angle keeps the fence at 90 deg. Router table top 24″ x 32″, heavy 1-3/8″ thick tabletop (1/4″ thicker than most other tables) has a sturdy mdf core, durable melamine surface and polyethylene plastic edges. Removable rings allow 3 different size openings (1-3/16″, 2-5/8″, and 4″) for a great fit with most router bits. High split fence constructed with an mdf core and a melamine surface, allows edge routing for safer vertical routing operations. Durable plastic safety guard helps protect eyes and face against flying woodchips. Hex head adjusting screws provide a perfectly level insert to top while small magnets hold the insert in place. A 12″ x 9″ phenolic router insert is also premounted.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.