Best 23 Slot Router Bits

 

Vermont American 22325 3/8-Inch Titanium Key Slot Router Bit - Optimized hook and shear angles for faster chip clearance and quicker feed rates. Razor sharp cutting edges are diamond honed for satin smooth cuts. Radial relief eliminates friction and chatter. Truest running shanks with concentricity of + 000″/-001″ tir (total indicator runout). Ball bearing guides on selected edging and trimming bits prevent burning and marring.

 

Uxcell a16042700ux0301 1/4″ x 3/8″ Straight Shank T Type Slotting T-Slot Router Cutter Bit - Material tungsten carbide weight 76g. Package content 1 x t-slot router bit, 1 x case main color blue, silver tone. Cutting dia 32mm / 126″ cutting depth 3/8″ shank dia 1/4″. Overall length 40mm / 16″ product name t-slot router bit. Standard 1/4″ x 3/8″ cutting width 94mm / 037″.

 

MLCS 7686 Screw Slot 2 Piece Router Bit Set Carbide Tipped 1/2inch Shank - Quality, carbide-tipped router bits. Anti-kickback design for added safety. Rout versatile screw slots for securing large panels or tabletops. Mlcs quality. Set includes counterbore and countersink screw slot bits.

 

Magnate 6104 T-Slot Router Bits – 1/4″ Kerf; 3/4″ Large Diameter; 3/8″ Small Diameter - It is also equipped with wide open gullets for easy disposal of wood chips. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

 

EnPointâ„¢ Teflon Coating Carbide Single Flute Straight Flush Tim Bit 1/4″ Shank 5/32″ Cut Dia 25/64″ Cut Height CNC Flakeboard Plywood Dado Plunge Router Bit Woodwork Grooving Slotting Cutter - Plunging tight corners and confined areas, sign-making, routing letter edges. For straight and square cuts, making dadoes and grooves. Carbide-tipped cutting edge for a tendency to stay sharper and clean edge. Medium carbon steel shank and hss main body for for high hardness, great resistance to heat and wear. Teflon painting on the tool bit for preventing stickness, thus easier and smoother chip evacuation.

 

uxcell 1/4 Inch x 2 Inch CNC Engraving Wood Perforation T-Slot Slotting Cutter Router Bit - Package content 1 x t-slot router bit, 1 x case main color blue, silver tone. Standard 1/4″ x 2″ cutting width 94mm / 037″. Material tungsten carbide weight 58g. Overall length 335mm / 13″ product name t-slot router bit. Cutting dia 32mm / 126″ cutting depth 2″ shank dia 1/4″.

 

Uxcell a16051700ux0122 1/4″ Shank 3/8″ Cutting Depth Groove Forming 2-Flute T-Slot Router Bit - Main color beige, silver tone standard 1/4″ x 3/8″. Weight 50g package content 1 x t-slot router bit. Cutting dia 32mm / 126″ cutting depth 952mm / 3/8″ shank dia 1/4″. Cutting width 94mm / 037″ bearing dia 127mm / 1/2″. Overall length 52mm / 205″ product name t-slot router bit material tungsten carbide.

 

Woodtek 942865, Router Bits, Groove Forming, T Slotting, 3/4″ X 1/4″ T-Slot Bit, 1/4″ Shank - Positive shear angle places less demand upon your routing equipment. Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. Imported. 1/4″ and 1/2″ shanks. Woodtek® carbide-tipped t-slot router bits are great for making storage systems, jigs or fixtures slots are shaped to fit common bolt heads or bolts with washers. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. Use with hand-held and table-mounted portable routers as well as cnc and other automatic routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Cnc-machining to +/-0. It’s recommended to first make a plough or rough cut with a straight bit 1/16” smaller than the smaller diameter (d1) of the t-slot cutter and then make the final pass with the t-slot cutter. 001″ tolerances and dynamic balancing help ensure vibration-free operation.

 

Vermont American 22616 3/8-Inch Carbide Hang Slot Router Bit - Truest running shanks with concentricity of + 000″/-001″ tir (total indicator runout). Radial relief eliminates friction and chatter. Ball bearing guides on selected edging and trimming bits prevent burning and marring. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Razor sharp cutting edges are diamond honed for satin smooth cuts.

 

Magnate 6102 T-Slot Router Bits – 5/16″ Kerf; 1-1/8″ Large Diameter; 3/8″ Small Diameter - In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion.

 

Magnate 6124 T-Slot Router Bits – 1/4″ Kerf; 1-3/16″ Large Diameter; 3/8″ Small Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Medium T-Slot Router Bit - Carbide tipped, made in the usa. It requires the cutting of a 3/8″ straight groove prior to routing the “t”. The medium t-slot measures 3/4″ w and 3/16″ h at the base with a 1/2″ shank. Whiteside special t-slot router bits are designed to make easy work of creating your own professional woodworking jigs and fixtures.

 

Infinity Tools 50-502, 1/2″ Shank T-Slot Router Bit - This creates a shoulder to securely grab screw, nail or bolt heads. Cuts a 3/8″ wide slot while the large diam. Cuts a 1-1/8″ wid slot beneath the surface. . These t-slot router bits are now offered in two popular sizes, these bits are handy for making slot walls for your shop that will work with standard bolts. As the router moves forward, the small diam.

 

T-Slot Cutter Router Bit for 1/4″ Hex Bolt – 1/4″ Shank – Yonico 14190q - Cutting dia 32mm / 126″ cutting depth 3/32″ shank dia 1/4″. Description great for your custom jig creations, the yonico 14190q t-slot router bit cuts t-slots f. Standard 1/4″ x 3/32″ cutting width 94mm / 037″. Package content 1 x t-slot router bit, 1 x case main color red, silver tone. Material tungsten carbide weight 24g.

 

T-Slot Cutter Router Bit for 1/4″ Hex Bolt – 1/4″ Shank – Yonico 14190q - Weight 33g package content 1 x t slot router bit,1 x plastic case. Main color silver tone bearing diameter 13mm/05″. Shank dia 6mm/1/4″ overall length 45mm/17″. Cutting dia 30mm/118″ cutting depth 3mm/1/8″. Description great for your custom jig creations, the yonico 14190q t-slot router bit cuts t-slots f.

 

uxcell 1/4 Inch Shank 1/8 Inch Cut Depth 2 Flute Bearing T Slot Router Bit - Shank dia 6mm/1/4″ overall length 45mm/17″. Product name t slot router bit material metal. Cutting dia 30mm/118″ cutting depth 3mm/1/8″. Weight 33g package content 1 x t slot router bit,1 x plastic case. Main color silver tone bearing diameter 13mm/05″.

 

Straight Shank 2 Flutes T Type Undercut Slot Router Bit 1/4″ x 2.5mm - Cutting depth 25mm /1/10″cutting diameter(overall) 30mm / 1 3/16″. Net weight 18gpackage content 1 x slot undercut router bit. Product name slot undercut router bitmaterial steel,carbide. Total length 40m / 16″color silver tone, blue. Standard 1/4″ x 25mmshankdia 635mm / 1/4″.

 

uxcell 1/4 Inch x 1/8 Inch Groove Forming T Type Slotting T-Slot Router Cutter Bit Cutting Tool - Material tungsten carbide weight 26g. Package content 1 x t-slot router bit, 1 x case main color blue, silver tone. Cutting dia 32mm / 126″ cutting depth 1/8″ shank dia 1/4″. Overall length 34mm / 13″ product name t-slot router bit. Standard 1/4″ x 1/8″ cutting width 94mm / 037″.

 

Yonico 14190q T-Slot Cutter Router Bit for 3/8-Inch Hex Bolt Heads 1/4-Inch Shank - Industrial quality router bits. Satisfaction guaranteed and lifetime warranty. C3 micro-grain tungsten carbide cutters. Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed & lifetime warranty. Build-up & heat resistant teflon coating. Build-up and heat resistant teflon coating.

 

42mm Long Straight Shank T Type Undercut Slot Router Bit 1/2″ x 3/8″ - Product name slot undercut router bitstandard 1/2″ x 3/8″. Material metalcolor silver tone, gray. Cutting diameter 32mm / 1 1/4″total length 42mm/ 17″. Shankdia 127mm / 1/2″cutting depth 952mm / 3/8″. Net weight 63gpackage content 1 x slot undercut router bit1 x plastic case.

 

CNBTR Yellow Cemented Carbide Woodworking Cutter T-Slot Cutter Router Bit with 1/2 Inch Shank - Used for cutting hardwood with it it goes right through it. Made of cemented carbide and long-lasting performance. They are tight and flush. Safety instructionsrazor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposedthe bladed product is not use for people under 18 yearsthe item is only for industrial cutting/engraving, not hazardous article.

 

Woodtek 942858, Router Bits, Groove Forming, T Slotting, 3/4″ X 1/8″ T-Slot Bit, 1/4″ Shank - Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Positive shear angle places less demand upon your routing equipment. It’s recommended to first make a plough or rough cut with a straight bit 1/16” smaller than the smaller diameter (d1) of the t-slot cutter and then make the final pass with the t-slot cutter. Use with hand-held and table-mounted portable routers as well as cnc and other automatic routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Woodtek® carbide-tipped t-slot router bits are great for making storage systems, jigs or fixtures slots are shaped to fit common bolt heads or bolts with washers. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. Cnc-machining to +/-0. 1/4″ and 1/2″ shanks. Imported.

 

Infinity Tools 50-503, 1/2″ Shank T-Slot Router Bit - . As the router moves forward, the small diam. Cuts a 1-3/8″ wid slot beneath the surface. These t-slot router bits are now offered in two popular sizes, these bits are handy for making slot walls for your shop that will work with standard bolts. This creates a shoulder to securely grab screw, nail or bolt heads. Cuts a 1/2″ wide slot while the large diam.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.