Walton Tools (WLT10314) 5/16″ (8MM) 4-FLUTE TAP EXTRACTOR
- Tap extractors will fit both nc and nf taps. Image depicts tap extractor parts holder, collar, sleeve and fingers .
Walton 30374 3/8″, 4 Flute STI Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
Walton 20374 3/8″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. For pipe taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 10043 #4, 3 Flute Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 10053 #5, 3 Flute Tap Extractor With Square Shank
- Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.
Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″. Packed in 6-compartment plastic case. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.
Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank
- Packed in 6-compartment plastic case. 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
Walton 10084 #8, 4 Flute Tap Extractor With Square Shank
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.
WALTON 15 Piece Tap Extractors Sets
- (1) each of the following sizes #4, 5, 6, 8, 10, 12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″ & 1″. Includes supplied in a plastic case. All sizes supplied in 4 flute except #4, #5, #6 in 3 flute.
Hanson 53204 Extractor 7/32″ Multi Spline, for Tap Die Extraction
- Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings. 1/2″ hex head and 3/8″ bolt diameter. Screw extractors are ideal for high-torque applications. Each irwin® screw extractor has an aggressive left-hand spiral design for extra gripping power. 7/32-inch recommended drill bit diameter.
Walton 30314 5/16″, 4 Flute STI Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available.
Walton 10082 #8, 2 Flute Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.
ZRSE 4pcs Screw Extractor Drill Set Bolt Remover Damaged Screw Remover Tap Extractors Easy Out
- This set is a “must have” and “time saver” tool for all homeowners, woodworkers, mechanics, artists, hobbyists, etc. High quality screw extractor drill set and damaged screw remover are made of durable hardened steel, hss 4341#, the hardness is 62-63hrc. Please purchase from the brand fheal and the shop zrse only if you buy them from the other seller i can not guarantee the quality quick shipping speed often takes you 7-15 business days choose us choose a new easy happy way of life. The 4 piece screw extractor set works with any drill and any screw size or bolt,such as works on wood and machine screws as well as philips, flat, hex, or painted over screws. Features a 2 in 1 drill bit/extractor design compatible with quick chuck systemsremoves any stripped screw in 10 seconds or less your damaged screw remover set is backed by our highest quality promise.
OMEGA 4 PC. BROKEN TAP EXTRACTOR SET INCLUDES 5/64, 1/8, 3/16 & 1/4″ OD-SET1 USA
- Our part # ttc-15-937-004. Includes (1) each of the following sizes 5/64″, 1/8″, 3/16″ & 1/4″ and pin vise with (2) picks. Works on spiral, forming as well as straight fluted taps. No more hassle removing broken taps and works every time. Helps eliminate scraping of expensive parts.
Walton 10103 #10, 3 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
40pc SAE Standard Tap & Die Set w/ Case Screw Extractor Remover Kit Thread NEW
- Includes the following sae thread sizes 4 x 40, 6 x 32, 8 x 32, 10 x 32, 10 x 24, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 1/2 x 20, 1/8npt x 27. Also includes 1/8 npt x 27 tap wrench, t-handle wrench, die handle, screwdriver, screw pitch gauge and carrying case.
Walton Replacement Finger for 3 Flute Tap Extractor, #4 Size
- Replacement finger for walton 3 flute, tap extractors. Made of hardened steel to help prevent the damage of the workpieces threads. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. For removing machine screws and broken hand taps.
Walton 10124 #12, 4 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. 11 piece set contains sizes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″. Packed in 6-compartment plastic case.
Walton 20124 1/8″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank
- When fingers become bent or broken or are too short for further use, replacement fingers are available. For pipe taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged.
Walton 10063 #6, 3 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Walton 10064 #6, 4 Flute Tap Extractor With Square Shank
- For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
