Best 21 Drill Points

 

Mitutoyo 950-275 Drill Point Gage 6 59 Degree

Mitutoyo 950-275 Drill Point Gage, 6″, 59 Degree

Mitutoyo 950-275 Drill Point Gage, 6″, 59 Degree - For measuring properly grounded 59 degree drill tips. Rule and slide made of steel with satin chrome finish. Slide graduated oem 32nds.

 

Steel Self-Drilling Screw Black Phosphate Finish Modified Truss Head Phillips Drive 3 Drill Point 10-16 Thread Size 34 Length Pack of 50

Steel Self-Drilling Screw, Black Phosphate Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Black Phosphate Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Black phosphate coating provides corrosion resistance and lubricity. Modified truss head is extra wide with a low-profile dome and integral round washer. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Self-Drilling Screw Zinc Plated Finish Wafer Head Star Drive 3 Drill Point 10-16 Thread Size 1-12 Length Pack of 50

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50) - Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Stainless 12 x 34 Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point 12 to 2-12 lengths in Listing 100 pieces 12 X 34 INCH

Stainless #12 x 3/4″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2″ to 2-1/2″ lengths in Listing), 100 pieces (#12 X 3/4 INCH)

Stainless #12 x 3/4″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2″ to 2-1/2″ lengths in Listing), 100 pieces (#12 X 3/4 INCH) - . The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. These stainless teks are great to use in environments that are damp.

 

Steel Self-Drilling Screw Black Oxide Finish Pan Head Phillips Drive 2 Drill Point 8-18 Thread Size 58 Length Pack of 100

Steel Self-Drilling Screw, Black Oxide Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 5/8″ Length (Pack of 100)

Steel Self-Drilling Screw, Black Oxide Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 5/8″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity.

 

Zinc Plated Steel Self-Drilling Screw Undercut 82 degrees Flat Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 inches Length Pack of 100

Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100) - Phillips drive is designed to cam out under too much torque. Create their own threads when driven into material. Flat head style allows fastener to sit flush to the surface. Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 1-12 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.

 

Stainless 6 x 12 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point 410 Stainless Steel Self Driller 100 pieces 6 x 12 Inch

Stainless #6 x 1/2 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces (#6 x 1/2 Inch)

Stainless #6 x 1/2 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces (#6 x 1/2 Inch) - Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. These stainless teks are great to use in environments that are damp. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 1 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 100) - Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Modified Truss Head Phillips Drive 3 Drill Point 10-16 Thread Size 34 Length Pack of 25

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length (Pack of 25) - 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer. Plain surface has no finish or coating.

 

Steel Self-Drilling Screw Zinc Plated Finish Sealing Hex Washer Head With EPDM Washer Hex Drive 3 Drill Point 12-24 Thread Size 78 Length Pack of 25

Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #12-24 Thread Size, 7/8″ Length (Pack of 25)

Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #12-24 Thread Size, 7/8″ Length (Pack of 25) - Sealing hex washer head has a flange with an epdm rubber washer bonded to the underside to resist leakage, loosening, and damage to the mating surface. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance.

 

Steel Self-Drilling Screw Black Zinc Plated Finish Hex Washer Head Hex Drive 3 Drill Point 10-16 Thread Size 1 Length Pack of 100

Steel Self-Drilling Screw, Black Zinc Plated Finish, Hex Washer Head, Hex Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 100)

Steel Self-Drilling Screw, Black Zinc Plated Finish, Hex Washer Head, Hex Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Hex washer head has a flange for additional grip with the mating surface. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Zinc plating resists corrosion and has a black reflective appearance.

 

Steel Self-Drilling Screw Zinc Plated Finish Flat Trim Head Square Drive 2 Drill Point 6-20 Thread Size 2-14 Length Pack of 50

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Trim Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 2-1/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Trim Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 2-1/4″ Length (Pack of 50) - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Square drive resists slippage better than a phillips or slotted drive. Trim head has a flat top and is smaller than other screw heads for less visibility when installed.

 

Steel Self-Drilling Screw Zinc Plated Finish Undercut 82 Degree Flat Head Phillips Drive 3 Drill Point 12-14 Thread Size 3 Length Pack of 25

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 3″ Length (Pack of 25)

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 3″ Length (Pack of 25) - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Self-Drilling Screw Zinc Plated Finish Pan Head Phillips Drive 3 Drill Point 14-14 Thread Size 6 Length Pack of 5

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Phillips Drive, #3 Drill Point, 1/4″-14 Thread Size, 6″ Length (Pack of 5)

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Phillips Drive, #3 Drill Point, 1/4″-14 Thread Size, 6″ Length (Pack of 5) - Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Wafer Head Phillips Drive 3 Drill Point 10-24 Thread Size 1-12 Length Pack of 25

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25) - Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Plain surface has no finish or coating. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Self-Drilling Screw Plain Finish Pan Head Phillips Drive 2 Drill Point 8-18 Thread Size 1-14 Length Pack of 25

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/4″ Length (Pack of 25)

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/4″ Length (Pack of 25) - Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Self-Drilling Screw Zinc Plated Finish Undercut 82 Degree Flat Head Phillips Drive 3 Drill Point 12-14 Thread Size 1-12 Length Pack of 25

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 1-1/2″ Length (Pack of 25)

Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 1-1/2″ Length (Pack of 25) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 12 Length Pack of 50

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2″ Length (Pack of 50)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2″ Length (Pack of 50) - Plain surface has no finish or coating. Modified truss head is extra wide with a low-profile dome and integral round washer. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Self-Drilling Screw Zinc Plated Finish Wafer Head Star Drive 3 Drill Point 10-16 Thread Size 1-14 Length Pack of 50

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50) - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance.

 

Stainless 10 x 1 Philips Pancake Head Self Drilling Sheet Metal Tek Screws With Drill Point 410 Stainless Steel Self Driller 100

Stainless #10 x 1 Philips Pancake Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller (100)

Stainless #10 x 1 Philips Pancake Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller (100) - #3 drill point. Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole. 100 pieces. Tensile, 180,000 psi, hardness, 40 rockwell c. Pancake head style is engineered to prevent damage to material being held.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.