Mitee-Bite MB-6150 Uniforce Fixture Clamp Mitee-Bite Clamping System, Uniforce Clamp
- Clamping systems, uniforce clamps, compact and economical, uniforce clamps enable you to fixture more parts on the machine table. Order one piece and you will receive one package. Ideal for clamping flat or round work pieces. Minimizes tool changes. The specially designed steel wedge spreads the clamping force uniformly on both sides of the aluminum channel. .
Mitee-Bite 8 32 Bolt 5/16″ Long 0.110″ Thick Fixture Clamp Cam Action Design
- Cam action clamp provides positive down force. Provides flexible set ups for hard to hold parts. Works in both plates with tapped hole layouts or t-slot configurations. Mitee-bite 5/16″ 24 bolt 13/16″ long 3/16″ thick fixture clamp cam. Mitee-bite 8 32 bolt 5/16″ long 0110″ thick fixture clamp cam.
Mitee-Bite Fixture Clamp 5/16-18 stainless steel Cam Action 4/pk
- Small size allows for more parts per load. The cam action fixture clamp is made up of 2 simple components a hardened stainless steel screw with offset head and a stainless hex washer. Cam action provides fast, strong clamping. Low profile for quick & easy installation of linear motion guide rails. .
Mitee-Bite MB-6075 Uniforce Fixture Clamp Mitee-Bite Clamping System, Uniforce Clamp
- Ideal for clamping flat or round work pieces. The specially designed steel wedge spreads the clamping force uniformly on both sides of the aluminum channel. Clamping systems, uniforce clamps, compact and economical, uniforce clamps enable you to fixture more parts on the machine table. Order one piece and you will receive one package. Minimizes tool changes. .
Mitee-Bite MB-5C Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Economical- all six sides of the hex nut can be used. The low profile makes programming easier because there are no clamps to jump over. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Metric sizes are in millimeters. Mb-10203 and mb-50207 are stainless steel. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Available in six sizes for use on multiple part fixtures. Its small size allows more parts per load on multiple series jobs.
Mitee-Bite 1/4″ 20 Bolt 5/8″ Long 3/16″ Thick Fixture Clamp Cam Action Design
- Cam action clamp provides positive down force. Components made of hardened steel workpiece is elevated for thru milling and drilling. Mitee-bite 1/4″ 20 bolt 5/8″ long 3/16″ thick fixture clamp cam. Works in both plates with tapped hole layouts or t-slot configurations. Provides flexible set ups for hard to hold parts.
uxcell Push-pull Fast Fixture Clamp Test Quick Clip Chucking Tool Apparatus Sliver
- Descriptionthe products are widely used in the manufacture of vehicles, welding, machining, electronic assembly, electronic equipment, plastic products, footwear, furniture manufacturing, mold, light industrial products manufacturing, machinery and equipment manufacturing, silk screen equipment manufacturing, pharmaceutical equipment manufacturing, storage equipment manufacturing waitspecificationgh push, pull quick fixtureclamping force 250kgweight370gmove the handle 45 degreepackage content1 x push-pull fast fixture .
Mitee-Bite MB-50212 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Economical- all six sides of the hex nut can be used. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Mb-10203 and mb-50207 are stainless steel. Its small size allows more parts per load on multiple series jobs. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. The low profile makes programming easier because there are no clamps to jump over. Available in six sizes for use on multiple part fixtures. Metric sizes are in millimeters.
Mitee-Bite 5/8″ 11 Bolt 1-3/16″ Long 1/2″ Thick Fixture Clamp Cam Action Design
- Mitee-bite 5/16″ 24 bolt 13/16″ long 3/16″ thick fixture clamp cam. Works in both plates with tapped hole layouts or t-slot configurations. Mitee-bite 8 32 bolt 5/16″ long 0110″ thick fixture clamp cam. Mitee-bite 5/8″ 11 bolt 1-3/16″ long 1/2″ thick fixture clamp cam. Cam action clamp provides positive down force.
Mitee-Bite MB-5 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Available in six sizes for use on multiple part fixtures. The low profile makes programming easier because there are no clamps to jump over. Its small size allows more parts per load on multiple series jobs. . Metric sizes are in millimeters. Economical- all six sides of the hex nut can be used. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Mb-10203 and mb-50207 are stainless steel.
Mitee-Bite MB-31350 Inside Diameter Expansion Fixture Clamp Mitee-Bite Clamping System, ID Xpansion Clamps
- Clamping systems, id xpansiontm clamps, these clamps are ideal to hold multiple parts on an inside diameter for machining on a machining center. 005″ over relaxed diameter and machine to fit work piece bore. Expand clamp approximately. 06″. 16″ to 4. These clamps are produced in 10 sizes and can hold internal diameters from.
rapid fixture clamps fixing horizontal pinch weld tooling Metalworking 203FL
- [Introduction] this product is assembled using a press molding plated cold-rolled steel surface rust treatment to make high strength and wear resistance. 1. [Range] widely used in the manufacture or assembly of clamping flip lock buckle luggage and other industrial agriculture test 2. [Principle] the flat four double rocker mechanism of structural mechanics dead clamping principle 4. [Features] easy installation and quick loading and unloading clamping force implicitly given high efficiency 3.
Mitee-Bite 1/2″ 13 Bolt 1″ Long 3/8″ Thick Fixture Clamp Cam Action Design
- 3-inch clamp face with v-groove design to hold round materials. Mitee-bite 1/2″ 13 bolt 1″ long 3/8″ thick fixture clamp cam. 2-1/2-inch jaw capacity handles most clamping jobs. Ergonomic handles for comfort and a quick-release mechanism for easy adjustments.
Mitee-Bite 3/8″ 16 Bolt 13/16″ Long 1/4″ Thick Fixture Clamp Cam Action Design
- Mitee-bite 5/16″ 24 bolt 13/16″ long 3/16″ thick fixture clamp cam. Mitee-bite 5/8″ 11 bolt 1-3/16″ long 1/2″ thick fixture clamp cam. Mitee-bite 3/8″ 16 bolt 13/16″ long 1/4″ thick fixture clamp cam. Works in both plates with tapped hole layouts or t-slot configurations. Mitee-bite 8 32 bolt 5/16″ long 0110″ thick fixture clamp cam.
Mitee-Bite MB-6 Hex-Head Cam-Action Socket Cap Screw Fixture Clamp Mitee-Bite Clamping System, Fixture Clamp
- Available in six sizes for use on multiple part fixtures. Metric sizes are in millimeters. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Economical- all six sides of the hex nut can be used. The low profile makes programming easier because there are no clamps to jump over. Mb-10203 and mb-50207 are stainless steel. Its small size allows more parts per load on multiple series jobs. Clamping systems, fixture clamps, the mitee-bitetm clamping system combines strength, versatility and performance with economy and ease of use. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time.
Mitee-Bite MB-31050 Inside Diameter Expansion Fixture Clamp Mitee-Bite Clamping System, ID Xpansion Clamps
- 16″ to 4. Expand clamp approximately. Clamping systems, id xpansiontm clamps, these clamps are ideal to hold multiple parts on an inside diameter for machining on a machining center. 005″ over relaxed diameter and machine to fit work piece bore. 06″. These clamps are produced in 10 sizes and can hold internal diameters from.
Mitee-Bite MB-24168 T-Slot Toe Fixture Clamp Mitee-Bite Clamping System, T-Slot Toe Clamp
- Total distance of movement. This clamp is mounted in the t-slots of machine tables by sliding the clamp to the work piece and tightening the locking screw. 100″. Two clamping edges, smooth for machined surface, and serrated for rough cut material. Clamping systems, t-slot toe clamps, a low profile cam action clamp with positive down force.
MITEE-BITE FIXTURE CLAMPS – Model : MB-5 SCREW SIZE: 5/16″-24 MAXIMUM HOLDING FORCE: 750 lbs. Thread Length: 1/2″
- Computer programming is easier, and the small size allows more parts per load. 100″ movement. Half turn provides. If one of the six sides is worn or damaged, just turn to another.
Mitee-Bite MB-24106 Compact Toe Fixture Clamp Mitee-Bite Clamping System, Compact Toe Clamp
- Positive down force with very little space. Adjustable clamp height. Workpieces can be clamped in series by using the backlsurface of a clamp to locate the next workpiece. Has both a smooth surface for machined workpieces. Has a serrated clamping surface for rougher work.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
