Best 18 Carbide Tipped Cutters

 

Magnate 8012B Rosette Carbide Tipped Cutter – 3-5/16″ Cutting Diameter; 1/2″ Shank Diameter - Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Lenox Tools 2010328CHC 28 Carbide Tipped Hole Cutter, 1-3/4-Inch or 44mm - Carbide hole cutter has an over-drill stopper to prevent penetration beyond the hole. Hole cutter features precision-ground carbide teeth for fast cutting of clean, round holes. Use the hole cutter with a 3l or 6l standard arbor. Split-point pilot bit gives fast penetration with less walking. Hole-cutting saw starts on contact.

 

Magnate 8017A Rosette Carbide Tipped Cutter – 2-5/8″ Cutting Diameter; 1/2″ Shank Diameter - The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Magnate 8047 Rosette Carbide Tipped Cutter – 2-3/4″ Cutting Diameter; 1/2″ Shank Diameter - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

Rothenberger 72392 Carbide-tipped Cutter, 1-1/4″ - Blades are cardibe tipped clears hardest obstructions and encrustations such as cement deposits, urine and water scale, blades are securely mounted to tool body long service life, recommended for use with s or smk cables.

 

Lenox Tools 2011344CHC 44 Carbide Tipped Hole Cutter, 2-3/4-Inch or 70mm - Hole cutter features precision-ground carbide teeth for fast cutting of clean, round holes. Use the hole cutter with a 3l or 6l standard arbor. Split-point pilot bit gives fast penetration with less walking. Hole-cutting saw starts on contact. Carbide hole cutter has an over-drill stopper to prevent penetration beyond the hole.

 

Magnate 8019B Rosette Carbide Tipped Cutter – 3-5/16″ Cutting Diameter; 1/2″ Shank Diameter - . Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm.

 

Greenlee 645-1-1/8 Kwik Change Carbide-Tipped Hole Cutter – 1-1/8″-2PK - Greenlee 645-1-1/8 is a kwik change carbide-tipped hole cutter for 3/4″ conduit. The kwik change design allows you to change cutter heads with a simple push and turn, and one arbor can be used with different sized cutting heads. Greenlee tools hole cutters are in stock and ready to ship today. Kwik change carbide tipped cutter is stainless steel, and also cuts mild steel, copper, and aluminum.

 

Magnate 8015A Rosette Carbide Tipped Cutter – 2-5/8″ Cutting Diameter; 1/2″ Shank Diameter - Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Lenox Tools 2009314CHC 14 Carbide Tipped Hole Cutter, 7/8-Inch or 22mm - Precision ground teeth ideal for fast cutting. Split point pilot bit for faster starts. Ideal for sheet metal.

 

Lenox Tools 2010534CHC 34 Carbide Tipped Hole Cutter, 2-1/8-Inch or 54mm - Carbide hole cutter has an over-drill stopper to prevent penetration beyond the hole. Use the hole cutter with a 3l or 6l standard arbor. Hole cutter features precision-ground carbide teeth for fast cutting of clean, round holes. Hole-cutting saw starts on contact. Split-point pilot bit gives fast penetration with less walking.

 

Magnate 8018A Rosette Carbide Tipped Cutter – 2-5/8″ Cutting Diameter; 1/2″ Shank Diameter - This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Magnate 8017B Rosette Carbide Tipped Cutter – 3-5/16″ Cutting Diameter; 1/2″ Shank Diameter - This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. . Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

Magnate 8015B Rosette Carbide Tipped Cutter – 3-5/16″ Cutting Diameter; 1/2″ Shank Diameter - This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

 

Magnate 8019A Rosette Carbide Tipped Cutter – 2-5/8″ Cutting Diameter; 1/2″ Shank Diameter - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. . This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Lenox Tools 2009820CHC 20 Carbide Tipped Hole Cutter, 1-1/4-Inch or 32mm - Ideal for sheet metal. Precision ground teeth ideal for fast cutting. Split point pilot bit for faster starts.

 

Magnate 8016B Rosette Carbide Tipped Cutter – 3-5/16″ Cutting Diameter; 1/2″ Shank Diameter - Split-point pilot bit gives fast penetration with less walking. 3-5/16″ cutting diameter 1/2″ shank diameter 3/4″ cutting height 1-1/2″ shank length 2 flute. Carbide hole cutter has an over-drill stopper to prevent penetration beyond the hole. 2-5/8″ cutting diameter 1/2″ shank diameter 3/4″ cutting height 1-1/2″ shank length 2 flute. Hole-cutting saw starts on contact.

 

Magnate 8013B Rosette Carbide Tipped Cutter – 3-5/16″ Cutting Diameter; 1/2″ Shank Diameter - This carbide tipped cutter is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm in general, at slow controlled feed speed with 300-500 rpm. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.