Best 14 Taper Shank Drills

 

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit 2 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1 Size Pack of 1

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1″ Size (Pack of 1)

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1″ Size (Pack of 1) - 118 degrees conventional point. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 1-inches size. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Precision Twist 5ATS High Speed Steel Taper Shank Drill Bit Black Oxide Finish Morse Taper Shank Spiral Flute 118 Degree Point Angle 1400mm

Precision Twist 5ATS High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 14.00mm

Precision Twist 5ATS High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 14.00mm - Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off. Jobber-length, the most common length drill bit, is suitable for a wide range of applications. Morse taper shank, secure and accurate tool-holding system. High-speed steel (hss), for use on a wide variety of materials. 118-degree conventional point angles, for general drilling applications.

 

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish 2 Morse Taper Shank 135 Degree Notch Point 58 Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size - 135 degree notch point reduces thrust forces and easier penetration. Straw finish standard from stock and alternate coatings are available as stock modifications. Heavy-duty geometry for drilling in tough, high-tensile materials under extreme operating conditions. Furnished with american national standard (morse) taper shanks. Manufactured from premium 8% cobalt (m42) high-speed steel for increasing hot hardness.

 

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish Morse Taper Shank Spiral Flute 135 Degree Point Angle 2332

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″ - 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Morse taper shank, for a secure and accurate tool-holding system. Gold oxide to retain cutting fluid and prevent chip to tool welding. Long length drill bits (also called taper length) have longer flutes and overall lengths than jobber drill bits.

 

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit Armor Piercing Gold Oxide Finish Morse Taper Shank 130 Degree Conventional Point 58 Pack of 1

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit, Armor Piercing, Gold Oxide Finish, Morse Taper Shank, 130 Degree Conventional Point, 5/8″ (Pack of 1)

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit, Armor Piercing, Gold Oxide Finish, Morse Taper Shank, 130 Degree Conventional Point, 5/8″ (Pack of 1) - With 15 degree helix. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools.

 

3164 MT2 x 10OAL Taper Shank Drill

31/64″ MT2 x 10″OAL Taper Shank Drill

31/64″ MT2 x 10″OAL Taper Shank Drill - . High speed steel, extra long, 118 degree point / general purpose flute construction for use in wide variety of materials.

 

Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit Black Oxide Finish 3 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1-116 Size Pack of 1

Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16″ Size (Pack of 1)

Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16″ Size (Pack of 1) - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Designed to perform in a broad range of materials in the iron and steel families.

 

Cleveland 2410 High Speed Steel Taper Shank Drill Bit Black Oxide 3 Morse Taper Shank 135 Degree Split Point 1 Dia x 11 Lg Pack of 1

Cleveland 2410 High Speed Steel Taper Shank Drill Bit, Black Oxide, #3 Morse Taper Shank, 135 Degree Split Point, 1″ Dia. x 11″ Lg (Pack of 1)

Cleveland 2410 High Speed Steel Taper Shank Drill Bit, Black Oxide, #3 Morse Taper Shank, 135 Degree Split Point, 1″ Dia. x 11″ Lg (Pack of 1) - Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. With 135 degree drill point, allowing for a cleaner drill hole and less slippage when starting. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. With 30 degree helix.

 

Drill America DEWA0303 Qualtech Drill Chuck Arbor 3 Morse Taper Shank To 3 Jacobs Taper Pack of 1

Drill America DEWA0303 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)

Drill America DEWA0303 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #3 Jacobs Taper (Pack of 1) - Drill america qualtech drill chuck arbor. . #3 morse taper shank to #3 jacobs taper.

 

ZFE 157mm Hss MT2 Morse Taper Shank Drill Bit

ZFE 15.7mm Hss MT2 Morse Taper Shank Drill Bit

ZFE 15.7mm Hss MT2 Morse Taper Shank Drill Bit - More details please see the description. Shank drill bit,mt2 morse taper shank. Above all for your reference welcome to buy. 157mm hss mt2 morse taper shank drill bit. 157mm hss mt2 morse taper.

 

Precision Twist 209 High Speed Steel Taper Shank Drill Bit Black Oxide Finish Morse Taper Shank Spiral Flute 118 Degree Point Angle 1

Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″

Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″ - Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off. Morse taper shank, for a secure and accurate tool-holding system. 118-degree conventional point angles for general drilling applications. High-speed steel (hss), for use on a wide variety of materials.

 

Drill Chuck Arbor 38 Straight to 33JT Hardened 33JT Jacobs Morse Taper Shank

Drill Chuck Arbor 3/8″ Straight to 33JT Hardened 33JT Jacobs Morse Taper Shank

Drill Chuck Arbor 3/8″ Straight to 33JT Hardened 33JT Jacobs Morse Taper Shank - Arbor will fit all drill chucks that with a 33jt bore and will fit on any machine tool with a 3/8″ straight spindle. 3/8″ straight shank to jacobs taper #33 (33jt). Long end is 3/8″, short end is 3jt. Made of precision ground, high grade tool steel. Our part # all-49618.

 

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit Black Oxide 2 Morse Taper Shank 135 Degree Split Point 78 Dia x 10 Lg Pack of 1

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #2 Morse Taper Shank, 135 Degree Split Point, 7/8″ Dia. x 10″ Lg (Pack of 1)

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #2 Morse Taper Shank, 135 Degree Split Point, 7/8″ Dia. x 10″ Lg (Pack of 1) - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. With 30 degree helix. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. With 135 degree drill point, allowing for a cleaner drill hole and less slippage when starting.

 

Precision Twist S209 High Speed Steel Taper Shank Drill Bit Black Oxide Finish Morse Taper Shank Spiral Flute 118 Degree Point Angle 1 732

Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 7/32″

Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 7/32″ - High-speed steel, for use on a wide variety of materials. Morse taper shank, secure and accurate tool-holding system. 118-degree conventional point angles good for general drilling applications. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.