25 Top Collar Bearings

 

Big Bearing SASTR201-08 Pressed Steel Three Bolt Flange Bearing with Lock Collar 12 Shaft Size 33 Flange Circle 113 Thickness

Big Bearing SASTR201-08 Pressed Steel Three Bolt Flange Bearing with Lock Collar, 1/2″ Shaft Size, 3.3″ Flange Circle, 1.13″ Thickness

Big Bearing SASTR201-08 Pressed Steel Three Bolt Flange Bearing with Lock Collar, 1/2″ Shaft Size, 3.3″ Flange Circle, 1.13″ Thickness - The bearing has a narrow inner ring with lock collar for attaching to the shaft. . High quality pressed steel 1/2″ three bolt flange bearing. Bearing is pre-filled with grease.

 

Whittet-Higgins CNB-28 Threaded Clampnut  Shaft Bearing Locknut Collar UNS 5497-12 Right-Hand Thread Self-Locking

Whittet-Higgins CNB-28 Threaded Clampnut / Shaft & Bearing Locknut Collar, UNS 5.497-12 Right-Hand Thread, Self-Locking,

Whittet-Higgins CNB-28 Threaded Clampnut / Shaft & Bearing Locknut Collar, UNS 5.497-12 Right-Hand Thread, Self-Locking, - Black oxide coating with wax finish to inhibit corrosion. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Made in usa. Easier and faster to install than traditional locknut & lockwasher. Slit locknut design with socket head cap screw provides single-point tangential locking.

 

Big Bearing HCAK210-31 Pillow Block Bearing with Lock Collar 1-1516 Shaft Size 813 Length 224 Width 442 Height Cast Iron Housing

Big Bearing HCAK210-31 Pillow Block Bearing with Lock Collar, 1-15/16″ Shaft Size, 8.13″ Length, 2.24″ Width, 4.42″ Height, Cast Iron Housing

Big Bearing HCAK210-31 Pillow Block Bearing with Lock Collar, 1-15/16″ Shaft Size, 8.13″ Length, 2.24″ Width, 4.42″ Height, Cast Iron Housing - High quality 1-15/16″ pillow block bearing. Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft.

 

Whittet-Higgins CNM-04 Threaded Clampnut  Shaft Bearing Locknut Collar Metric M20 x 10 Right-Hand Thread Self-Locking

Whittet-Higgins CNM-04 Threaded Clampnut / Shaft & Bearing Locknut Collar, Metric M20 x 1.0 Right-Hand Thread, Self-Locking,

Whittet-Higgins CNM-04 Threaded Clampnut / Shaft & Bearing Locknut Collar, Metric M20 x 1.0 Right-Hand Thread, Self-Locking, - Made in usa. Black oxide coating with wax finish to inhibit corrosion. Easier and faster to install than traditional locknut & lockwasher. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Slit locknut design with socket head cap screw provides single-point tangential locking.

 

Big Bearing HCAK207-20 Pillow Block Bearing with Lock Collar 1-14 Shaft Size 657 Length 189 Width 362 Height Large Cast Iron Housing

Big Bearing HCAK207-20 Pillow Block Bearing with Lock Collar, 1-1/4″ Shaft Size, 6.57″ Length, 1.89″ Width, 3.62″ Height, Large Cast Iron Housing

Big Bearing HCAK207-20 Pillow Block Bearing with Lock Collar, 1-1/4″ Shaft Size, 6.57″ Length, 1.89″ Width, 3.62″ Height, Large Cast Iron Housing - High quality 1-1/4″ pillow block bearing. Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft.

 

Whittet-Higgins CNF20-12 CThreaded Clampnut  Shaft Bearing Locknut Collar UNF 1250-12 Right-Hand Thread Self-Locking replaces Climax TC-125-12 Ruland TCL-20-12-F Stafford 3L104 7L104F

Whittet-Higgins CNF20-12 CThreaded Clampnut / Shaft & Bearing Locknut Collar, UNF 1.250-12 Right-Hand Thread, Self-Locking, replaces Climax TC-125-12, Ruland TCL-20-12-F, Stafford 3L104, 7L104F,

Whittet-Higgins CNF20-12 CThreaded Clampnut / Shaft & Bearing Locknut Collar, UNF 1.250-12 Right-Hand Thread, Self-Locking, replaces Climax TC-125-12, Ruland TCL-20-12-F, Stafford 3L104, 7L104F, - Slit locknut design with socket head cap screw provides single-point tangential locking. Easier and faster to install than traditional locknut & lockwasher. Made in usa. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Black oxide coating with wax finish to inhibit corrosion.

 

Big Bearing HCAK211-32 Pillow Block Bearing with Lock Collar 2 Shaft Size 863 Length 236 Width 49 Height Large Cast Iron Housing

Big Bearing HCAK211-32 Pillow Block Bearing with Lock Collar, 2″ Shaft Size, 8.63″ Length, 2.36″ Width, 4.9″ Height, Large Cast Iron Housing

Big Bearing HCAK211-32 Pillow Block Bearing with Lock Collar, 2″ Shaft Size, 8.63″ Length, 2.36″ Width, 4.9″ Height, Large Cast Iron Housing - High quality 2″ pillow block bearing. Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft.

 

Big Bearing HCFT211-35 Two Bolt Flange Bearing with Lock Collar 2-316 Shaft Size 854 Length 504 Width 294 Thickness Cast Iron

Big Bearing HCFT211-35 Two Bolt Flange Bearing with Lock Collar, 2-3/16″ Shaft Size, 8.54″ Length, 5.04″ Width, 2.94″ Thickness, Cast Iron

Big Bearing HCFT211-35 Two Bolt Flange Bearing with Lock Collar, 2-3/16″ Shaft Size, 8.54″ Length, 5.04″ Width, 2.94″ Thickness, Cast Iron - Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with an eccentric locking collar (cam lock) for attaching to the shaft. High quality 2-3/16″ two bolt flange bearing.

 

Big Bearing HCFT210-30 Two Bolt Flange Bearing with Lock Collar 1-78 Shaft Size 748 Length 449 Width 26 Thickness Cast Iron

Big Bearing HCFT210-30 Two Bolt Flange Bearing with Lock Collar, 1-7/8″ Shaft Size, 7.48″ Length, 4.49″ Width, 2.6″ Thickness, Cast Iron

Big Bearing HCFT210-30 Two Bolt Flange Bearing with Lock Collar, 1-7/8″ Shaft Size, 7.48″ Length, 4.49″ Width, 2.6″ Thickness, Cast Iron - Housing is cast iron with a grease zerk for re-lubing the bearing. . High quality 1-7/8″ two bolt flange bearing. The bearing has a wide inner ring with an eccentric locking collar (cam lock) for attaching to the shaft.

 

Big Bearing HCAK210-32 Pillow Block Bearing with Lock Collar 2 Shaft Size 813 Length 224 Width 442 Height Small Cast Iron Housing

Big Bearing HCAK210-32 Pillow Block Bearing with Lock Collar, 2″ Shaft Size, 8.13″ Length, 2.24″ Width, 4.42″ Height, Small Cast Iron Housing

Big Bearing HCAK210-32 Pillow Block Bearing with Lock Collar, 2″ Shaft Size, 8.13″ Length, 2.24″ Width, 4.42″ Height, Small Cast Iron Housing - . Housing is cast iron with a grease zerk for re-lubing the bearing. High quality 2″ pillow block bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft.

 

Big Bearing ALF207-23G Light Duty Two Bolt Flange Bearing with Lock Collar 1-716 Shaft Size 48 Length 35 Width 161 Thickness Cast Iron

Big Bearing ALF207-23G Light Duty Two Bolt Flange Bearing with Lock Collar, 1-7/16″ Shaft Size, 4.8″ Length, 3.5″ Width, 1.61″ Thickness, Cast Iron

Big Bearing ALF207-23G Light Duty Two Bolt Flange Bearing with Lock Collar, 1-7/16″ Shaft Size, 4.8″ Length, 3.5″ Width, 1.61″ Thickness, Cast Iron - Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a narrow inner ring with lock collar for attaching to the shaft. High quality light duty 1-7/16″ two bolt flange bearing w/ lock collar.

 

Whittet-Higgins CNF16-12 CThreaded Clampnut  Shaft Bearing Locknut Collar UNF 1000-12 Right-Hand Thread Self-Locking replaces Climax TC-100-12 Ruland TCL-16-12-F

Whittet-Higgins CNF16-12 CThreaded Clampnut / Shaft & Bearing Locknut Collar, UNF 1.000-12 Right-Hand Thread, Self-Locking, replaces Climax TC-100-12, Ruland TCL-16-12-F,

Whittet-Higgins CNF16-12 CThreaded Clampnut / Shaft & Bearing Locknut Collar, UNF 1.000-12 Right-Hand Thread, Self-Locking, replaces Climax TC-100-12, Ruland TCL-16-12-F, - Slit locknut design with socket head cap screw provides single-point tangential locking. Black oxide coating with wax finish to inhibit corrosion. Made in usa. Easier and faster to install than traditional locknut & lockwasher. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque.

 

Big Bearing HCFT204-12 Two Bolt Flange Bearing with Lock Collar 34 Shaft Size 445 Length 236 Width 131 Thickness Cast Iron Housing

Big Bearing HCFT204-12 Two Bolt Flange Bearing with Lock Collar, 3/4″ Shaft Size, 4.45″ Length, 2.36″ Width, 1.31″ Thickness, Cast Iron Housing

Big Bearing HCFT204-12 Two Bolt Flange Bearing with Lock Collar, 3/4″ Shaft Size, 4.45″ Length, 2.36″ Width, 1.31″ Thickness, Cast Iron Housing - The bearing has a wide inner ring with an eccentric locking collar (cam lock) for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing. . High quality 3/4″ two bolt flange bearing.

 

Big Bearing HCFS210-31 Four Bolt Flange Bearing with Lock Collar 1-1516 Shaft Size 563 Length 26 Thickness Cast Iron Housing

Big Bearing HCFS210-31 Four Bolt Flange Bearing with Lock Collar, 1-15/16″ Shaft Size, 5.63″ Length, 2.6″ Thickness, Cast Iron Housing

Big Bearing HCFS210-31 Four Bolt Flange Bearing with Lock Collar, 1-15/16″ Shaft Size, 5.63″ Length, 2.6″ Thickness, Cast Iron Housing - The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing. High quality 1-15/16″ four bolt flange bearing.

 

Big Bearing HCFS208-24 Four Bolt Flange Bearing with Lock Collar 1-12 Shaft Size 508 Length 232 Thickness Cast Iron Housing

Big Bearing HCFS208-24 Four Bolt Flange Bearing with Lock Collar, 1-1/2″ Shaft Size, 5.08″ Length, 2.32″ Thickness, Cast Iron Housing

Big Bearing HCFS208-24 Four Bolt Flange Bearing with Lock Collar, 1-1/2″ Shaft Size, 5.08″ Length, 2.32″ Thickness, Cast Iron Housing - . Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft. High quality 1-1/2″ four bolt flange bearing.

 

Whittet-Higgins CNF12-16S Stainless Clampnut  Shaft Bearing Locknut Collar UNF 750-16 Right-Hand Thread Self-Locking replaces Climax TC-075-16-S Ruland TCL-12-16-SS Stafford 3S012

Whittet-Higgins CNF12-16S Stainless Clampnut / Shaft & Bearing Locknut Collar, UNF .750-16 Right-Hand Thread, Self-Locking, replaces Climax TC-075-16-S, Ruland TCL-12-16-SS, Stafford 3S012,

Whittet-Higgins CNF12-16S Stainless Clampnut / Shaft & Bearing Locknut Collar, UNF .750-16 Right-Hand Thread, Self-Locking, replaces Climax TC-075-16-S, Ruland TCL-12-16-SS, Stafford 3S012, - Slit locknut design with socket head cap screw provides single-point tangential locking. Made in usa. Easier and faster to install than traditional locknut & lockwasher. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Corrosion resistant stainless steel.

 

Reversible Stile Rail With Rub Collar And Bearing ogee

Reversible Stile & Rail With Rub Collar And Bearing (ogee)

Reversible Stile & Rail With Rub Collar And Bearing (ogee) - 437″ bolt distance. 1-15/16″ shaft size. Grease zerk for re-lubing the bearing. Housing is cast iron. Honda 91551-ve4-000 collar bearing.

 

Big Bearing ALF204-12G Light Duty Two Bolt Flange Bearing with Lock Collar 34 Shaft Size 354 Length 24 Width 132 Thickness Cast Iron Housing

Big Bearing ALF204-12G Light Duty Two Bolt Flange Bearing with Lock Collar, 3/4″ Shaft Size, 3.54″ Length, 2.4″ Width, 1.32″ Thickness, Cast Iron Housing

Big Bearing ALF204-12G Light Duty Two Bolt Flange Bearing with Lock Collar, 3/4″ Shaft Size, 3.54″ Length, 2.4″ Width, 1.32″ Thickness, Cast Iron Housing - The bearing has a narrow inner ring with lock collar for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing. High quality light duty 3/4″ two bolt flange bearing w/ lock collar. .

 

Big Bearing HCFT212-39 Two Bolt Flange Bearing with Lock Collar 2-716 Shaft Size 933 Length 543 Width 318 Thickness Cast Iron

Big Bearing HCFT212-39 Two Bolt Flange Bearing with Lock Collar, 2-7/16″ Shaft Size, 9.33″ Length, 5.43″ Width, 3.18″ Thickness, Cast Iron

Big Bearing HCFT212-39 Two Bolt Flange Bearing with Lock Collar, 2-7/16″ Shaft Size, 9.33″ Length, 5.43″ Width, 3.18″ Thickness, Cast Iron - High quality 2-7/16″ two bolt flange bearing. Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with an eccentric locking collar (cam lock) for attaching to the shaft.

 

Big Bearing HCFS211-32 Four Bolt Flange Bearing with Lock Collar 2 Shaft Size 638 Length 294 Thickness Cast Iron Housing

Big Bearing HCFS211-32 Four Bolt Flange Bearing with Lock Collar, 2″ Shaft Size, 6.38″ Length, 2.94″ Thickness, Cast Iron Housing

Big Bearing HCFS211-32 Four Bolt Flange Bearing with Lock Collar, 2″ Shaft Size, 6.38″ Length, 2.94″ Thickness, Cast Iron Housing - Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft. High quality 2″ four bolt flange bearing.

 

Whittet-Higgins CNF14-14 CThreaded Clampnut  Shaft Bearing Locknut Collar UNF 875-14 Right-Hand Thread Self-Locking replaces Climax TC-087-14 Ruland TCL-14-14-F Stafford 3L014 7L014F

Whittet-Higgins CNF14-14 CThreaded Clampnut / Shaft & Bearing Locknut Collar, UNF .875-14 Right-Hand Thread, Self-Locking, replaces Climax TC-087-14, Ruland TCL-14-14-F, Stafford 3L014, 7L014F,

Whittet-Higgins CNF14-14 CThreaded Clampnut / Shaft & Bearing Locknut Collar, UNF .875-14 Right-Hand Thread, Self-Locking, replaces Climax TC-087-14, Ruland TCL-14-14-F, Stafford 3L014, 7L014F, - Easier and faster to install than traditional locknut & lockwasher. Slit locknut design with socket head cap screw provides single-point tangential locking. Made in usa. Black oxide coating with wax finish to inhibit corrosion. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque.

 

Big Bearing HCAK208-24 Pillow Block Bearing with Lock Collar 1-12 Shaft Size 725 Length 205 Width 386 Height Cast Iron Housing

Big Bearing HCAK208-24 Pillow Block Bearing with Lock Collar, 1-1/2″ Shaft Size, 7.25″ Length, 2.05″ Width, 3.86″ Height, Cast Iron Housing

Big Bearing HCAK208-24 Pillow Block Bearing with Lock Collar, 1-1/2″ Shaft Size, 7.25″ Length, 2.05″ Width, 3.86″ Height, Cast Iron Housing - . High quality 1-1/2″ pillow block bearing. Housing is cast iron with a grease zerk for re-lubing the bearing. The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft.

 

Big Bearing ALP207-21G Light Duty Pillow Block Bearing with Lock Collar 1-516 Shaft Size 65 Length 148 Width 372 Height Cast Iron

Big Bearing ALP207-21G Light Duty Pillow Block Bearing with Lock Collar, 1-5/16″ Shaft Size, 6.5″ Length, 1.48″ Width, 3.72″ Height, Cast Iron

Big Bearing ALP207-21G Light Duty Pillow Block Bearing with Lock Collar, 1-5/16″ Shaft Size, 6.5″ Length, 1.48″ Width, 3.72″ Height, Cast Iron - The bearing has a narrow inner ring with locking collar for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing. High quality light duty 1-5/16″ pillow block bearing. .

 

Whittet-Higgins CNC22-6 Threaded Clampnut  Shaft Bearing Locknut Collar UNC 1375-6 Right-Hand Thread Self-Locking replaces Climax ISTC-137-06 TC-137-06

Whittet-Higgins CNC22-6 Threaded Clampnut / Shaft & Bearing Locknut Collar, UNC 1.375-6 Right-Hand Thread, Self-Locking, replaces Climax ISTC-137-06, TC-137-06,

Whittet-Higgins CNC22-6 Threaded Clampnut / Shaft & Bearing Locknut Collar, UNC 1.375-6 Right-Hand Thread, Self-Locking, replaces Climax ISTC-137-06, TC-137-06, - Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Easier and faster to install than traditional locknut & lockwasher. Slit locknut design with socket head cap screw provides single-point tangential locking. Black oxide coating with wax finish to inhibit corrosion. Made in usa.

 

Big Bearing HCAK206-19 Pillow Block Bearing with Lock Collar 1-316 Shaft Size 65 Length 173 Width 323 Height Cast Iron Housing

Big Bearing HCAK206-19 Pillow Block Bearing with Lock Collar, 1-3/16″ Shaft Size, 6.5″ Length, 1.73″ Width, 3.23″ Height, Cast Iron Housing

Big Bearing HCAK206-19 Pillow Block Bearing with Lock Collar, 1-3/16″ Shaft Size, 6.5″ Length, 1.73″ Width, 3.23″ Height, Cast Iron Housing - The bearing has a wide inner ring with a eccentric locking (cam lock) collar for attaching to the shaft. High quality 1-3/16″ pillow block bearing. Housing is cast iron with a grease zerk for re-lubing the bearing. .