25 Best Wood Lathe Chucks

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch. Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch.

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System - Basic straight jaws for 1-inch stock, square or round. Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch. Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers. Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch.

 

Hurricane Turning Tools Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - These jaws are only compatible with the htc100. This listing is for a set of large dovetail jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. Many jaw sets are available and inserts are interchangeable for use on today’s most popular lathes. Don’t have an htc100 if you haven’t heard of the hurricane htc100 4″ woodturning chuck, please check it out in our ebay store. It is a super high quality chuck, without the super high price of competitive chucks. They can be used in compression mode for gripping a tenon or expansion mode for internal holding within a dovetail recess.

 

Hurricane Turning Tools Large Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of large serrated jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. Serrated jaws are used for gripping end grain cylinders. Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. They can be used for this but they are not as strong as dovetail jaws. .

 

Hurricane Turning Tools Pin Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Pin Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Pin Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - These jaws are only compatible with the htc100. The straight side can be used to hold the inside of a small box body. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. This listing is for a set of pin jaws with dovetail , which are used on the hurricane htc100 4 jaw woodturning scroll chuck. The dovetail is set away from the flat jaw surface by about 1 inch. In compression mode, they can grip a small part like a final, or pen mandrel. . These jaws are for small work and have several uses used in expansion mode for internal holding within a dovetail recess.

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System by PSI Woodworking

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System by PSI Woodworking

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System by PSI Woodworking - For large bowl turning (requires 16″ or larger swing lathe. Also includes 8 extra long mounting screws for double jaws use (see description). Kit includes 6040 12″ cole jaws, 6039 12-15″ cole jaw adaptors, and 6030 buffer acc kit. Psi cmg3c mini grip 4 jaw wood lathe chuck system. Please see item description for more details.

 

Hurricane Turning Tools Extended Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Extended Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Extended Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - They are used in expansion mode for internal holding within a dovetail recess. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. This listing is for a set of extended dovetail jaws, sometimes called spindle nose jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. The dovetail is set away from the flat jaw surface by about 1 inch. You can also use them in compression mode to hold small object down to these jaws are only compatible with the htc100. .

 

Aluminum Jumbo  Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Aluminum Jumbo / Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Aluminum Jumbo / Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck - Removed easily with a knock-out bar. Drill chuck mounts in the 2 mt. Can be used in either the headstock or tailstock. Tightens by hand without the need for a chuck key. Will hold drill bits up to 1/2-inch in diameter.

 

Hurricane Turning Tools Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - They can also be used in expansion mode for holding inside a dovetail recess. Standard dovetail jaws are the most common jaw type used in woodturning. These jaws are normally included in the basic chuck kit, but you might need an extra set, or purchased a chuck as “body only” these jaws are only compatible with the htc100. This listing is for a set of standard dovetail jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. They are typically used in compression mode for holding a tenon or “foot” on the bottom of a bowl or platter. Measurements compression 1 3/4″, 3″ expansion 2 1/4″, 3 1/2″.

 

Hurricane Turning Tools JumboCole Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Jumbo/Cole Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Jumbo/Cole Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - These jaws are only compatible with the htc100. These jaws are used for gripping the top of a bowl in compression or expansion mode, allowing you to finish the bottom of the bowl. The buttons open to about 12 inches. The jaw set comes with 8 buttons which can be placed in the various hole locations to accommodate a variety of bowl sizes. . This listing is for a set of jumbo / cole jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck.

 

Hurricane Turning Tools Large Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. This listing is for a set of large serrated jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. Serrated jaws are used for gripping end grain cylinders. They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. They can be used for this but they are not as strong as dovetail jaws.

 

Sherline 1043 - 3-Jaw Self-centering Wood Lathe Chuck

Sherline 1043 – 3-Jaw Self-centering Wood Lathe Chuck

Sherline 1043 – 3-Jaw Self-centering Wood Lathe Chuck - 0001″. . Rotating the knurled ring closes all three jaws simultaneously to quickly grip round or hexagonal stock. Sherline technicians custom grind each jaw to fit its own slot with as little play as possible. The hole through the chuck is. This assure maximum accuracy. 687″ (17 mm). It has a clamping range of 3/32″ (2 mm) up to 1-3/16″ (30 mm) diameter with the jaws in the normal position. Sherline 1043, 3-jaw self-centering wood lathe chuck 3. 1″ diameterthis chuck is identical to our p/n 1040 self-centering chuck except that it has a 1″-8 tpi thread that accommodates most wood-working lathes. Because this chuck was initially designed for machine-lathe work, its accuracy far exceeds what is necessary for general wood turning. As chucks wear, they become looser and easier to turn. With the jaws in the reversed position, work up to 2-1/4″ (56 mm) can be gripped. If you have sent in an old chuck for jaw replacement or are replacing an old, worn chuck, you will notice that the new one is initially harder to turn than your worn one. Grinding is done to within. Tommy bars (provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. Jaw tightness on scrolling chucks.

 

Hurricane Turning Tools Spigot Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Spigot Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Spigot Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - These jaws are only compatible with the htc125. This listing is for a set of spigot jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. Normally, these are used holding small items like a box or lid. The outside jaws are serrated. Spigot jaws can be used in expansion mode for internal holding within a straight wall. In compression mode, they can be used for holding small work. They are very useful for holding inside a candlestick.

 

Hurricane Turning Tools Pin Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Pin Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Pin Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - The straight side can be used to hold the inside of a small box body. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. These jaws are only compatible with the htc125. In compression mode, they can grip a small part like a final, or pen mandrel. These jaws are for small work and have several uses used in expansion mode for internal holding within a dovetail recess. This listing is for a set of pin jaws with dovetail , which are used on the hurricane htc125 4 jaw woodturning scroll chuck. The dovetail is set away from the flat jaw surface by about 1 inch.

 

Hurricane Turning Tools Standard Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Standard Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Standard Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - They are typically used in compression mode for holding a tenon or “foot” on the bottom of a bowl or platter. Standard dovetail jaws are the most common jaw type used in woodturning. Measurements compression 2 1/4 “, 4 1/8″ expansion 2 7/8″, 4 3/4″. These jaws are normally included in the basic chuck kit, but you might need an extra set, or purchased a chuck as “body only” these jaws are only compatible with the htc125. They can also be used in expansion mode for holding inside a dovetail recess. This listing is for a set of standard dovetail jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck.

 

Hurricane Turning Tools Spigot Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Spigot Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Spigot Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - They are very useful for holding inside a candlestick. Normally, these are used holding small items like a box or lid. This listing is for a set of spigot jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. These jaws are only compatible with the htc100. In compression mode, they can be used for holding small work. The outside jaws are serrated. Spigot jaws can be used in expansion mode for internal holding within a straight wall.

 

Hurricane Turning Tools Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. . They can be used for this but they are not as strong as dovetail jaws. Serrated jaws are used for gripping end grain cylinders. Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. This listing is for a set of serrated jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck.

 

Hurricane Turning Tools Step Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Step Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Step Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of step jaws with serrated grip , which are used on the hurricane htc125 4 jaw woodturning scroll chuck. These jaws are only compatible with the htc125. These jaws are used in expansion mode for internal holding within a straight wall. Normally, these are used holding small items like a box or lid.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking - Comes with 4 sets of jaws 1 step jaws, 2 round jaws, 3 wide jaws and pin jaws. Screw chuck insert for bowl turning. Psi csc2000c barracuda wood lathe chuck system. Chuck body threaded 1-1/2-inch by 8tpi, with optional adapters to 1-inch by 8tpi, 1-1/4-inch by 8tpi, m33 by 35 mm. Long shaft chuck key, “t” handled allen wrench.

 

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System - Holds workpiece from 5/8-to-2-inch inside hole diameter. Holds dowell from 1/4-inch up to 1-1/2-inch outside diameter. Mounts to 3/4-inch-by-16 tpi & also adapts to 1-inch-by-8 tpi. Includes step jaws, round jaws, and pin jaws. Weighs only 12 pounds with a 2-1/8-inch outside diameter.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking - For large bowl turning (requires 16″ or larger swing lathe. Also includes 8 extra long mounting screws for double jaws use (see description). Please see item description for more details. Psi csc2000c barracuda wood lathe chuck system. Kit includes 6040 12″ cole jaws, 6039 12-15″ cole jaw adaptors, and 6030 buffer acc kit.

 

PSI Woodworking CSC3000CTN Barracuda 2 Special Edition TN 12 Piece Lathe Chuck System

PSI Woodworking CSC3000CTN Barracuda 2 Special Edition T/N, 12 Piece Lathe Chuck System

PSI Woodworking CSC3000CTN Barracuda 2 Special Edition T/N, 12 Piece Lathe Chuck System - Features include an indexing accessory, a screw chuck, and a 5/8-inch super spur drive center insert. Mounting holes can be held internally from 11/16-to-3-3/8-inch diameter. Direct drive gear tooth jaw tightening “t” handle allows one-hand operation. Suitable for mini, midi and full sized lathes. Round stock can be held externally from 3/32-to-4-3/8-inch diameter bowls can be held by the outside rim up to a 5-inch diameter.

 

Hurricane Turning Tools Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - These jaws are only compatible with the htc100. . These jaws are used in expansion mode for internal holding within a straight wall. Normally, these are used holding small items like a box or lid. This listing is for a set of step jaws with serrated grip , which are used on the hurricane htc100 4 jaw woodturning scroll chuck.

 

Hurricane Turning Tools Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - Serrated jaws are used for gripping end grain cylinders. This listing is for a set of serrated jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. They can be used for this but they are not as strong as dovetail jaws. They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”.

 

Hurricane Turning Tools Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - The dovetail is set away from the flat jaw surface by about 1 inch. This listing is for a set of extended dovetail jaws, sometimes called spindle nose jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. You can also use them in compression mode to hold small object down to these jaws are only compatible with the htc125. They are used in expansion mode for internal holding within a dovetail recess.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.