Stainless Steel Hand Crimp Toggle and Stud Turnbuckle Tensioner for 3/16″ Cable -Cable Railing Fitting – Stud Fitting – Deck Railing – Hand Railing (10Sets)
- Stainless steel t316, toggle & stud turnbuckle tensioner for 3/16″ cable. A swage tool is required for crimiping. High quality, marine grade for maximum corrosion resistance. Overall length closed 7-1/8″, length of body 3-3/4″, jaw opening 040″, pin diameter 023″. Package includes 10sets (1set = 1 turnbuckle & 1 end fitting, as pictured).
VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing for Metal Posts (Low Clearance Head) – Lot of 50
- High-grade stainless steel, these stemballs are made of t316 marine-grade steel that offers maximum durability in harsh climates. Hidden, the stemball swages provide a simple, hidden end to a cable railing with a very small, low clearance head being the only exposed part. Do it yourself, these high-quality fittings provided a “dead end” for a diy cable railing project. Functional, this fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run. Affordable, stemball swages are the most economical type of end fitting you could use, while still being 100% functional.
Canare TC-1 Hand Crimp Tool without Die-by Canare
- Each set comes with stud, nut, washer & cap nut. Overall length 10″, length of thread 7-1/2″, thread 1/4″- 20. High quality, marine grade for maximum corrosion resistance. Type 316 stainless steel hand swage extra long fitting, for 3/16″ cable. A swage tool is required for crimping.
10pcs Stainless Steel Threaded Tensioner Stud Ends Threaded Hand Crimp Swage Stud/Swage Tension End Fitting for 1/8″ Cable Railing System
- ✅ Cable tensioner made of high strength stainless steel, it is durable, sturdy and not easy to rust. ✅ suitable for outdoor or indoor use, can be used for wood posts and has an excellent shine to it. ✅ Comes with threaded stud, washer, hex nut and cap nut for easy and quick installing. ✅ They are typically housed entirely within your end posts, which make a super clean look for your project. ✅ Designed for use with 1/8inch (3175mm) single strand cables, it provides tensioning for your cables.
10pc Set – Stainless Steel Type 316 Marine Grade Hand Crimp Deck Toggle and Swage Stud Turnbuckle Fitting for Cable Railing Rigging Hardware Surface Mount Deck, Stairs -3/16″ Cable
- Stainless steel t316 deck toggle turnbuckle & deck toggle hand swage fitting for 3/16″ cable. A swage tool is required for crimping. Deck toggle end fitting dimensions eyes for screws 1/4″, overall length 3″. Package includes 10pc set (1 turnbuckle, 1 fitting & 4 screws per set). Turnbuckle dimensions eyes for screws 1/4″, overall length closed 7-1/2″.
Senmit Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing T316 Marine Grade – 50 Pack
- Overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. Invisible hidden in the post make a clean look for wood post or metal post. High-quality t316 marine grade perfect for fitting 1/8″ stainless steel cable to make a dead end. Recommend to use with senmit threaded terminal stud end and senmit cable protector sleeve. Hand-crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope.
MOLEX 63819-0900 HAND CRIMP TOOL
- Price for eachorder unit each 1 svhc to be advised. ✅ cable tensioner made of high strength stainless steel, it is durable, sturdy and not easy to rust. ✅ Designed for use with 1/8inch (3175mm) single strand cables, it provides tensioning for your cables. ✅ Comes with threaded stud, washer, hex nut and cap nut for easy and quick installing. ✅ They are typically housed entirely within your end posts, which make a super clean look for your project.
Waldom Electronics W-HT-1921 TOOL, CRIMPING, HAND, MOLEX, FOR .062 INCH AND .093 INCH CONTACTS by WALDOM ELECTRONICS
- 062″ &. Hand crimp tool & wire cutter/wire stripper/bolt cutter features designed to crimp terminals, strip and cut wires, and cut bolts for molex. 093″ and kk® series crimp terminals strips 10awg to 20 awg crimps 18awg to 30 awg.
VistaView CableTec Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ Cables
- Durable tool, this hand crimper is made of quality materials that can handle the sturdiness of stainless steel cables. Do-it-yourself, the vistaview hand crimper allows you to do it yourself without hiring anyone to fix your railings for you. 1-cavity crimper, this 14-inch tool has one cavity options that crimps 1/8-inch fittings. Easy to use, the tool is the smallest hand-crimper on the market, making it simple to use efficiently. Designed for steel fittings, this tool is perfect for crimping the stainless steel fittings of cable railings and boat rigging.
Muzata Stemball Swage Dead Ends Paired Threaded Stud Tension End Fitting Terminal for 1/8″ Cable Railing,Hand Crimp Fixed Tensioner,Stainless Steel T316 20PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1
- Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search for muzata cr09 to purchase muzata custom hand crimper swage tool. These t316 marine stemball swage fittings provided a “dead end” for 1/8″ stainless steel wire rope invisible cable railing project hidden in all sorts of post,from 4x4s down to 2″pipes,make a clean look for wood post or metal post. This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23), cable protector sleeve(search for muzata cr13),1/8″ stainless steel cable wire rope (muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)30 degree angle beveled washer(muzata cr25). Overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. These stainless steel handcrimp stemball swages end fittings are the perfect end for cable railing the stemball swages provide an economical end fitting, while still making sure your railing is functional as well as safe and secure.
Muzata Stainless Steel Cable Cutter and Hand Crimper Tool Set, for Railing Fittings1/16″,5/64″,3/32″,7/64″,1/8″ Cables CK02,Series CT1
- Worked easily cutting the cable didn’t even need both hands to cut up to 3/16 galvanized and coated cable for those wondering. This cable cutter is designed for cutting steel wire which up to 5/32″, if you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do after 200 cuts off the 1/8” 7×7 assemble coated steel security cable it still very sharp and clean cut. The swaging tool can crimp multiple sizes ferrules including 1/16″,5/64″,3/32″,7/64″,1/8″ for use on the paired cable you also can use the 1/8 for 5/32, there is at least that much error in the crimp that it should work just fine these sizes refer to the diameter of the cable and the inside diameter the sleeve. It is good for crimping aluminum and copper ferrules and stops only steel and stainless steel fittings require heavier swagers. Good precision ferrules and stops fit exactly heavy duty and very sturdy ,well built will last for years.
VistaView CableTec Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ & 3/16″ Cables
- Recommended for 1/8″ and 3/16″ vistaview hand-crimp fittings (sold separately). This is a two-cavity hand crimper (swager) for stainless steel cable fittings for cable railings and boat rigging. The tool is 20″ long and can handle any type of home cable railing or boat rigging project. The tool has two cavities, one which is for 1/8″ fittings and the other is for 3/16″ fittings. Crimper is not for crimping oval sleeves, only steel fittings not a cutter.
Hand Crimp Tool Kit YJQ-W2A/AF8 Crimp Tool/M22520/1-01+TH1A/M22520/1-02 Turret Head 12-26AWG by PRECISETOOL
- [Wire crimp range] 12-26awg (0128-333mm²). [Crimp style]4 indent 8 impression. [applicable contact size] 12#, 16#, 20# pin & socket. [Package include]yjq-w2a/af8 four-indent hand crimp tool & th1a turret head. [Applicable connector models]mil-dtl-83723, mil-c-81703 series 3, mil-c-81703 series 2, sae as81659 series 2 (arinc 404), sae as81659 series 1, mil-dtl-as81714, mil-dtl-26482 series 1, mil-dtl-26482 series 2, mil-dtl-26500, mil-dtl-83527, mil-dtl-38300, sae as50151 series 3450, sae as50151 series 3400,mil-dtl-83733.
VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 3/16″ Cable Railing (4-1/4″ Long, for Wood Or Metal Posts) – Lot of 10
- Unctional, use on one end or both ends of your strands for maximum tensioning ability. Do it yourself, these fittings are used to properly tension cable strands in a diy cable railing project. All-purpose, these threaded tensioners can be used on all sorts of posts, from 4×4’s down to 2″ pipes. Decorative, terminals are primarily housed within end posts with only the stainless nuts and caps exposed on the outside of the post. High-grade stainless steel, these terminals are made of t316 marine-grade steel that offers maximum durability in harsh climates.
Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Combination Pack for 1/8″ Cable Railing Kit System,Tension End Fitting,T316 Marine Grade Stainless Steel 10Pairs CK14,Series CA1 CD1 CS1
- You could search partnumber to find other muzata cable railing kit accessaries work better with this muzata wr01→1/8 stainless steel cable wire ropemuzata cr09→customized hydraulic crimper super hard mold for steelmuzata cr12→cable cutter up to 5/32″muzata cr13→protector sleevesmuzata cr25→30 degree angle beveled washer. This cable railing kit includes 10pcs swage threaded studs and 10pcs stemball swages,can create 10 runs 1/8″ cables railingkit made of t316 marine grade stainless steelthey can be used indoor or outdoor wood & metal post,decking railing,stairs railing handrails. Both terminals and stemballs fitting ends are hidden in the post to keep deck or stair cable railing system prettythe threaded terminal tensions your cable railing with only a few turns of a hex nutthe stemball swage end holds the cable in place on one endperfect for wood steel or aluminum post. You can diy to install a cable railing systemthe stud end could be adjusted to tighten the wire rope so you don’t need to wast money on turnbuckle or tensionerthese swage studs and stemball swage are fit for 1/8″ cable , they are designed for decades using. These deck railing hardware require a special hand crimper tool make sure to use muzata customized hand swaging tool for stainless steel 1/8″ fittings(search for muzata cr09) standard crimper tools typically will not put a sufficient crimp on these steel fittings, which could result in cable loosening and slipping out.
DasMarine Swage Turnbuckle with Lag Screw for 1/8″ Cable Wire Deck Stair Railing, Hand Crimp Swage, Stainless Steel T316 Marine Grade Cable Railing Kit (Pack of 10)
- ▲These swage turnbuckles with lag screws are for cable runs that attach to the surface of a wood post or wall the screw is about 19 inch long so you will not have to offset them if used in a 4×4 corner post overall length of the turnbuckle including the lag screw is 8 inch. ▲Overall length = 8″ max length = 11″ thread length = 1-1/2″ hole size = 1/8″. ▲high quality stainless steel t316 marine grade for maximum durability, high tensile and anti-fatigue strength, and weather protection hand swage and industry leading manufacturing process. ▲This lag screw swage turnbuckle used to mount the 1/8″ wire rope cable in the wooden balusters. ▲ Package included 10 pack of swage turnbuckle with lag screw for 1/8″ cable wire deck stair railing.
Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,30PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1
- Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search for muzata cr09 to purchase muzata custom hand crimper swage tool. These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. Recommended this cable railing fitting work together with other muzata cable railing accessoriesmuzata is cable railing kit hardware manufacture we provide full solution to customers and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing project cable railing fitting search for muzata ca1,stair angled railing search for muzata cs1 cable railing tool search for muzata ct1 cable railing wire rope search for muzata wp1. These t316 marine grade fittings provided a “dead end” for diy 1/8″ stainless steel cable railing project. This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13).
MOLEX/ Waldom 63819-0000 HAND CRIMP TOOL 22-30 AWG
- Molex crimpers / hand crimp tool, 30-20 awg.
Swage Turnbuckle with Lag Screw for 1/8″ Cable Wire Deck Railing | Hand Crimp Swage | Stainless Steel T316 Marine Grade | Free Drill Bit | Cable Railing Kit (Lot of 5, by DEMUX)
- High quality stainless steel t316 marine grade for maximum durability, high tensile and anti-fatigue strength, and weather protection hand swage and industry leading manufacturing process. Perfect for small diy cable railing project to big scale indoor and outdoor applications now it’s very easy to make a railing for your garden, stairs, and aisles. Free 5/16″ drill bit (limited time offer) for drilling work. Demux swage turnbuckle with lag screw is used to mount a traditional cable wire deck railing into wood. Thread length = 1-1/2″, hole size = 1/8″, overall length = 7-1/4″.
EMERSON CONNECTIVITY/TROMPETER 010-0098 TOOL, HAND CRIMP, CENTER CONTACT
- 【Material】top quality left hand thread lag screw hand-crimp swage stud, made of t316 marine grade stainless steel for maximum durability, strength and weatherability. 【Package includes】 10 left hand thread lag screw hand-crimp swage stud. 【Fitment/compatibility】 fit for 1/8″ cable railing stainless steel t316 marine grade. 【Size】 overall length = 4″, thread length = 2″, thread diameter = 1/4″, pilot hole size = 1/8″. Price for each for use with 75ohm bnc & mini weco pins rohs compliant na.
Muzata Sunk Head Stemball Swage Stud Dead Ends for 1/8″ Cable Railing Hand Crimp Stainless Steel T316 10PCS CR51,Series CA1 CD1 CS1 CD2 CS2 CV1
- This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). These t316 marine grade fittings provided a “dead end” for a diy1/8″ stainless steel cable railing project. Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search muzata ct1 to purchase muzata custom hand crimper swage tool. These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. Muzata is manufacture directly we provide full solution to commit all your need and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing projectplease search for these partnumbers to work better with this 1/8 stainless steel cable(muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)protector sleeves(muzata cr13)30 degree angle beveled washer(muzata cr25).
Molex Crimpers / Hand Crimp Tool, 24-16 awg 63819-0900
- Molex crimpers / hand crimp tool, 24-16 awg.
10pcs Left Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade
- 【Fitment/compatibility】 fit for 1/8″ cable railing stainless steel t316 marine grade. 【Size】 overall length = 4″, thread length = 2″, thread diameter = 1/4″, pilot hole size = 1/8″. 【Material】top quality left hand thread lag screw hand-crimp swage stud, made of t316 marine grade stainless steel for maximum durability, strength and weatherability. 【applications】 high-quality stainless steel fittings surface mount a traditional diy cable railing into wood, perfectly planning your own cable railing project, good for indoor or outdoor applications. 【Package includes】 10 left hand thread lag screw hand-crimp swage stud.
Crimp Tool, Hand, Molex Micro-Fit 3.0 43030, 43031, 44372 & 45773 30-20AWG Terminals
- Molex crimpers / hand crimp tool, 30-20 awg.
Molex Crimpers/Hand Crimp Tool, 24-18 awg 63819-0901
- Molex crimpers / hand crimp tool, 24-18 awg use with part(s) mini-fit jr. Male and female crimp terminals, 16-24 awg.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
