24 Top Lmt Onsruds for 2020

 

LMT Onsrud 63-768 Solid Carbide Upcut Spiral O Flute Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 63-768 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-768 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle.

 

LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Double flute, 22 degree angle.

 

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. One flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 35000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 60-124MW Solid Carbide Max Life Compression Spiral Cutting Tool Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 60-124MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 60-124MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Double flute, 30 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool Inch Uncoated Bright Finish 30 Degree Helix 3 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Three flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 37-25 Solid Carbide Engraving Tool Uncoated Bright Finish 1 Flute 0020 Tip Diameter 30 Degree 14 Shank Diameter 2 Overall Length Pack of 1 #ad

LMT Onsrud 37-25 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 37-25 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) #ad - Engraving tool, carbide, size 0. 020 in, 30 degree angle, shank dia 1/4 in, overall length 2 in, for wood, plastic, aluminum and solid surfaces.

 

LMT Onsrud 60-123MW Solid Carbide Max Life Compression Spiral Cutting Tool Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 60-123MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 60-123MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 25000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Routing end mill, downcut spiral o-flute, high performance, number of flutes 1, single end, plunge point end style, center cutting type, right hand cut, carbide, uncoated finish, dia 1/8 in, shank dia 1/4 in, length of cut 1/2 in, overall length 2 in, cut angle 21 deg, helix angle 21 deg, for hdpe, uhmw, abs, polycarbonate, polypropylene.

 

LMT Onsrud 60-245 Solid Carbide Upcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 60-245 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 60-245 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Designed for perfect balance and ultra smooth finish over a wide speed range. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Three flute, 10 degree angle.

 

LMT Onsrud 60-172MW Solid Carbide Max Life Compression Spiral Cutting Tool Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 40000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 60-172MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 60-172MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. One flute, 21 degree angle.

 

LMT Onsrud 65-020 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 65-020 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 65-020 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Routing end mill, upcut spiral o-flute, high performance, number of flutes 1, single end, plunge point end style, center cutting type, right hand cut, carbide, uncoated finish, dia 3/16 in, shank dia 1/4 in, length of cut 1 1/4 in, overall length 3 in, cut angle 25 deg, helix angle 25 deg, for plastic, wood, aluminum, and solid surface.

 

LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 35000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Three flute, 10 degree angle. Designed for perfect balance and ultra smooth finish over a wide speed range. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter #ad - Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 45000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Three flute, 10 degree angle. Designed for perfect balance and ultra smooth finish over a wide speed range. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Three flute, 10 degree angle. Designed for perfect balance and ultra smooth finish over a wide speed range. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Designed for perfect balance and ultra smooth finish over a wide speed range. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Three flute, 10 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Single flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool Uncoated Bright Finish 1 Flute 21 Degree Helix 12 Cutting Length 18 Cutting Diameter 14 Shank Diameter 2 Overall Length Pack of 1 #ad

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) #ad - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 62-719 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 01875 Shank Diameter #ad

LMT Onsrud 62-719 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter

LMT Onsrud 62-719 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter #ad - 3/16 in. 3/16 in. , Application routing plastic, number of flutes 1. Routing end mill, list number 62-719, end square, end style square, cutting type center, dia. , Overall length 2 in. , Shank dia. , Length of cut 5/8 in. , helix angle 21 deg.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.