23 Top Ring Shank Nails

 

Anchor 238X113SPSSRZ 2-38-Inch by 0113 30-33 Degree Paper Tape Clipped Head Stainless Steel Ring Shank Nail 500CTN

Anchor 238X113SPSSRZ 2-3/8-Inch by 0.113 30-33 Degree Paper Tape Clipped Head Stainless Steel Ring Shank Nail 500/CTN

Anchor 238X113SPSSRZ 2-3/8-Inch by 0.113 30-33 Degree Paper Tape Clipped Head Stainless Steel Ring Shank Nail 500/CTN - Ring shank. 500 per box. Fits 30-33 degree clipped head framing tools. Conforms to astm-153b standards. 2-3/8-inch by 113 stainless steel.

 

Spot Nails Spot Nails CW5D083R 1-34-inch by 083-inch Wire Coil Ring Shank Nails 11200 per Box

Spot Nails Spot Nails CW5D083R 1-3/4-inch by .083-inch Wire Coil Ring Shank Nails 11,200 per Box

Spot Nails Spot Nails CW5D083R 1-3/4-inch by .083-inch Wire Coil Ring Shank Nails 11,200 per Box - Their products are manufacture red to the highest quality standards for the professional contractor. Spot nails is the top manufacturer of interchange tools and fasteners with a large selection in most every collated category.

 

PAS3x120 Ring Shank Nail 304 Stainless Steel 34º Paper Tape D Head

PAS3″x120 Ring Shank Nail 304 Stainless Steel 34º Paper Tape (D Head)

PAS3″x120 Ring Shank Nail 304 Stainless Steel 34º Paper Tape (D Head) - 120 ring shank 304 stainless steel nails designed to work in senco and paslode paper tape nailers. . These are 3″ x. 1,000 d headed nails per box.

 

BOSTITCH S6DR113GAL-FH 28 Degree 2-Inch by 113-Inch Wire Weld Galvanized Ringshank Framing Nails 2000 per Box

BOSTITCH S6DR113GAL-FH 28 Degree 2-Inch by .113-Inch Wire Weld Galvanized Ringshank Framing Nails (2,000 per Box)

BOSTITCH S6DR113GAL-FH 28 Degree 2-Inch by .113-Inch Wire Weld Galvanized Ringshank Framing Nails (2,000 per Box) - Thickcoattm galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications. Works in f28ww, n88wwb, n79ww, n80sb. Full roundhead 2″ x 113″ 28 degree wire collated framing nail. Ring shank geometry provides maximum withdrawal capacity when extra holding power is required. 2,000 per box.

 

NailPro 2-12 Inch by 0120 1000 Pcs per Carton - Type 304 Stainless Steel - 21 Degree Fits 20-22 Degree Nailers Plastic Strip - Ring Shank - Full Head Nails

NailPro 2-1/2 Inch by 0.120 1000 Pcs. per Carton – Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails

NailPro 2-1/2 Inch by 0.120 1000 Pcs. per Carton – Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails - 9/32″ full round head diameter. Type 304 stainless steel, ring shank. 2-1/2″ x 120 plastic strip nails. Fits 20-22 degree nailers.

 

B&C Eagle 134X092HDRPC Round Head 1-34-Inch x 092 x 15 Degree Hot Dip Galvanized Ring Shank Plastic Collated Coil Framing Nails 6000 per box

B&C Eagle 134X092HDRPC Round Head 1-3/4-Inch x .092 x 15 Degree Hot Dip Galvanized Ring Shank Plastic Collated Coil Framing Nails (6,000 per box)

B&C Eagle 134X092HDRPC Round Head 1-3/4-Inch x .092 x 15 Degree Hot Dip Galvanized Ring Shank Plastic Collated Coil Framing Nails (6,000 per box) - For use in 15 degree mini coil siding and framing nailers. Plastic collated ring shank. New and improved packaging helps protect product during shipment. Full round head. Hot dip galvanized coating resists corrosion and rust for interior and exterior use rated for use in treated lumber.

 

B&C Eagle 134X090HDRC Round Head 1-34-Inch x 090 x 15 Degree Hot Dip Galvanized Ring Shank Wire Collated Coil Framing Nails 5400 per box

B&C Eagle 134X090HDRC Round Head 1-3/4-Inch x .090 x 15 Degree Hot Dip Galvanized Ring Shank Wire Collated Coil Framing Nails (5,400 per box)

B&C Eagle 134X090HDRC Round Head 1-3/4-Inch x .090 x 15 Degree Hot Dip Galvanized Ring Shank Wire Collated Coil Framing Nails (5,400 per box) - Full round head. Wire collated ring shank. New and improved packaging helps protect product during shipment. Hot dip galvanized coating resists corrosion and rust for interior and exterior use rated for use in treated lumber. For use in 15 degree mini coil siding and framing nailers.

 

NailPro 3-14 Inch by 0131 - 1000 Pcs per Carton- Type 304 Stainless Steel 21 Degree Fits 20-22 Degree Nailers Plastic Strip - Ring Shank - Full Head Nails

NailPro 3-1/4″ Inch by 0.131 – 1000 Pcs. per Carton- Type 304 Stainless Steel 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails

NailPro 3-1/4″ Inch by 0.131 – 1000 Pcs. per Carton- Type 304 Stainless Steel 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails - 3-1/4″ x 131 plastic strip nails. Fits 20-22 degree nailers. Type 304 stainless steel, ring shank. 9/32″ full round head diameter.

 

NailPro 1-12-Inch by 0120 - 15 Degree Wire Coil Ring Shank Roofing Nail - Stainless Steel -720 pc Stack Pack

NailPro 1-1/2-Inch by 0.120 – 15 Degree Wire Coil Ring Shank Roofing Nail – Stainless Steel -720 pc. Stack Pack

NailPro 1-1/2-Inch by 0.120 – 15 Degree Wire Coil Ring Shank Roofing Nail – Stainless Steel -720 pc. Stack Pack - Type 304 stainless steel. Ring shank. 3/8″ head diameter. Fits 15 degree coil roofing nailers.

 

Hitachi 2 in x 0113-Gauge Plastic 1M Galvanized Ring Shank Nails

Hitachi 2 in. x 0.113-Gauge Plastic 1M Galvanized Ring Shank Nails

Hitachi 2 in. x 0.113-Gauge Plastic 1M Galvanized Ring Shank Nails - 113-gauge plastic 1m galvanized ring shank nails are designed for rough nailing of lathing and sheathing materials. For rough nailing of lathing and sheathing materials plastic collating helps prevent splitting of wooden materials 2 in. X 0. The nails feature plastic collating and a ring-groove shaft. 2 in. Long ring-grooved shaft portion forces the material fibers to separate and then lock into the rings includes 1,000 nails.

 

DeWalt DEWDT99628RS - DT99628RS Stainless Steel Ring Shank Nails 28 x 63mm

DeWalt DEWDT99628RS – DT99628RS Stainless Steel Ring Shank Nails 2.8 x 63mm

DeWalt DEWDT99628RS – DT99628RS Stainless Steel Ring Shank Nails 2.8 x 63mm - 8 x 63mm. The nails are fully tested to work with the dewalt framing nailer, providing the best level of performance between nail and nail gun. Finish stainless steel. Applications perfect for the assembly of roofing timbers, fascias, panelling, decking and fencingthe dewdt99528rb clipped head nails have the following specifications type ring shank size 2. This dewalt range of clipped head nails are qualified to eurocode 5 standard and cover service classes 1,2 & 3. The nails are suitable for any site environment. Pack quantity 2,200.

 

Grip-Rite 10d Sinker 3- by 12-Inch Ring Shank Hot-Dipped Galvanized Full Round Head Plastic Collated Stick Framing Nails 500 per tub

Grip-Rite 10d Sinker 3- by .12-Inch, Ring Shank, Hot-Dipped, Galvanized, Full Round Head, Plastic Collated, Stick Framing Nails, 500 per tub

Grip-Rite 10d Sinker 3- by .12-Inch, Ring Shank, Hot-Dipped, Galvanized, Full Round Head, Plastic Collated, Stick Framing Nails, 500 per tub - 500 nails weighs 48 pounds shipped. Tub of 500 3-inch by 120-inch 21-degree plastic collated stick framing nails. Clear, resealable, reusable, stackable plastic tub. Ring shank design for added holding power. Use these nails with grip-rite grtrh350 21-degree full round head framing nailer and many other models.

 

DEWALT DT99931RB Bright Finish Ring Shank Nails - 31 x 90mm

DEWALT DT99931RB Bright Finish Ring Shank Nails – 3.1 x 90mm

DEWALT DT99931RB Bright Finish Ring Shank Nails – 3.1 x 90mm - 1mm, type ring shank, finish bright, pack quantity box of 2,200 end of ideabright ltd description., A range of nails fully tested to work with the dewalt framing nailer providing the best level of performance between nail and nail gun specification, – length 90mm, diameter 3. Ideabright ltd description dewalt dt99931rb bright finish ring shank nails, 3. 1 x 90mm, dewalt range of clipped head nails qualified to eurocode 5 standard and covering service classes 1,2 & 3, a suitable nail available for any site environment.

 

NailPro 2-14 Inch by 0093 - Ring Shank Siding Nail - 15 Degree Wire Coil - Stainless Steel -3600 pc  CTN

NailPro 2-1/4 Inch by 0.093 – Ring Shank Siding Nail – 15 Degree Wire Coil – Stainless Steel -3600 pc. / CTN

NailPro 2-1/4 Inch by 0.093 – Ring Shank Siding Nail – 15 Degree Wire Coil – Stainless Steel -3600 pc. / CTN - Ring shank. Type 304 stainless steel. Fits 15 degree coil siding nailers. 15/64″ head diameter.

 

FOX VALLEY STEEL AND WIRE FW14GC RING SHANK NAIL DRYWALL 12-12 GA 50LB 1-12 pack of 10

FOX VALLEY STEEL AND WIRE FW14GC RING SHANK NAIL DRYWALL 12-1/2 GA 50LB 1-1/2″ (pack of 10)

FOX VALLEY STEEL AND WIRE FW14GC RING SHANK NAIL DRYWALL 12-1/2 GA 50LB 1-1/2″ (pack of 10) - Cord is premium grade, made from first quality, long-lasting rubber. Protective coating resists corrosion and won’t mar paint. Dependable, vinyl coated, heavy gauge steel hook. Size 36″ dependable, vinyl coated, heavy gauge steel hook protective coating resists corrosion and won’t mar paint cord is premium grade, made from first quality, long-lasting rubber durable uv resistant outer jacket is woven in highly visible, attractive colors. Durable uv resistant outer jacket is woven in highly visible, attractive colors.

 

NailPro 3-12 Inch by 0131 - 2000 Pcs per Carton Type 304 Stainless Steel - 21 Degree Fits 20-22 Degree Nailers Plastic Strip - Ring Shank - Full Head Nails

NailPro 3-1/2″ Inch by 0.131 – 2000 Pcs. per Carton Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails

NailPro 3-1/2″ Inch by 0.131 – 2000 Pcs. per Carton Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails - Type 304 stainless steel, ring shank. 9/32″ full round head diameter. 3-1/2″ x 131 plastic strip nails. Fits 20-22 degree nailers.

 

MAZE NAILS H526A-5 Pole Barn Ring Shank Nails 5-Pound 20D 4-Inch

MAZE NAILS H526A-5 Pole Barn Ring Shank Nails, 5-Pound 20D 4-Inch

MAZE NAILS H526A-5 Pole Barn Ring Shank Nails, 5-Pound 20D 4-Inch - Easy to use. Stiff stock and oil quench hardened. Sharp ring shanks. Nails comply with the astm standard specification of f1667 for driven fasteners. Manufactured in china. Tough, reliable performance. Highly durable. Excellent holding power.

 

Maze Nails H534a050 Ring Shank Hardened Pole Barn Nail 8 Long

Maze Nails H534a050 Ring Shank Hardened Pole Barn Nail, 8″ Long

Maze Nails H534a050 Ring Shank Hardened Pole Barn Nail, 8″ Long - Highlights gauge 80d length 8″ 5-1/2 gauge oil-quenched hardened ring shank nails that comply with the astm standard specification f1667 for driven fasteners bulk 50# box made in the usa from recycled steel, qualifies for leed credits.

 

Spot Nails Spot Nails CW6D083R 2-inch by 083-inch Wire Coil Ring Shank Nails 11200 per Box

Spot Nails Spot Nails CW6D083R 2-inch by .083-inch Wire Coil Ring Shank Nails 11,200 per Box

Spot Nails Spot Nails CW6D083R 2-inch by .083-inch Wire Coil Ring Shank Nails 11,200 per Box - Spot nails is the top manufacturer of interchange tools and fasteners with a large selection in most every collated category. Their products are manufacture red to the highest quality standards for the professional contractor. .

 

NailPro 1-34-Inch by 0120 - 15 Degree Wire Coil - Stainless Steel - Ring Shank Roofing Nail 3600 pc  CTN

NailPro 1-3/4-Inch by 0.120 – 15 Degree Wire Coil – Stainless Steel – Ring Shank Roofing Nail 3600 pc. / CTN

NailPro 1-3/4-Inch by 0.120 – 15 Degree Wire Coil – Stainless Steel – Ring Shank Roofing Nail 3600 pc. / CTN - Ring shank. Type 304 stainless steel. Fits 15 degree coil roofing nailers. 3/8″ head diameter.

 

NailPro 3-14 Inch by 0120 -2000 Pcs per Carton - Type 304 Stainless Steel - 21 Degree Fits 20-22 Degree Nailers Plastic Strip - Ring Shank - Full Head Nails

NailPro 3-1/4″ Inch by 0.120 -2000 Pcs. per Carton – Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails

NailPro 3-1/4″ Inch by 0.120 -2000 Pcs. per Carton – Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails - Type 304 stainless steel, ring shank. Fits 20-22 degree nailers. 9/32″ full round head diameter. 3-1/4″ x 120 plastic strip nails.

 

NailPro 1-12 Inch by 093 - Ring Shank Siding Nails - 15 Degree Wire Coil - 316 Stainless Steel Marine Grade - 3600 pc  CTN

NailPro 1-1/2 Inch by .093 – Ring Shank Siding Nails – 15 Degree Wire Coil – 316 Stainless Steel (Marine Grade) – 3600 pc. / CTN

NailPro 1-1/2 Inch by .093 – Ring Shank Siding Nails – 15 Degree Wire Coil – 316 Stainless Steel (Marine Grade) – 3600 pc. / CTN - Type 316 stainess steel (marine grade). 7/32″ head diameter. Fits 15 degree coil siding nailers. Ring shank.

 

NailPro 1-14 Inch by 0093 - 15 Degree Wire Coil - Stainless Steel - Ring Shank Siding Nail 3600 pc  CTN

NailPro 1-1/4 Inch by 0.093 – 15 Degree Wire Coil – Stainless Steel – Ring Shank Siding Nail 3600 pc. / CTN

NailPro 1-1/4 Inch by 0.093 – 15 Degree Wire Coil – Stainless Steel – Ring Shank Siding Nail 3600 pc. / CTN - Type 304 stainless steel. 15/64″ head diameter. Fits 15 degree coil siding nailers. Ring shank.