23 Coolest Glue Joint Router Bits

 

Freud? 99-031 Reversible Glue Joint Router Bit – 1-1/2inch Dia x 1-1/4inch H x 1/2inch Shank - 5500 bit type joinery diameter 1-1/2inch cutter height 1-1/4inch shank size 1/2inch flutes 2 . Cuts composition materials, plywoods, hardwoods, and softwoods compatible with cnc machines and other automatic routers, as well as table-mounted portable routers brand freud manufacturer part number 99-031 weight (lbs) 0.

 

Yonico 15330 Multi Sided Glue Joint Router Bit Set 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Magnate 7363 Reversible Glue Joint Router Bits – 1-1/8″ Cutting Length; 1/2″ Shank Diameter - Adjusting the bit according to the thickness of the wood, line up the cut edge of the wood to the center point of the bit. You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Make the 1st cut face up, then turn the wood upside down to make the reverse matching cut. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Yonico 15330 Multi Sided Glue Joint Router Bit Set 1/2-Inch Shank - Multi-sided glue joint bits make joining up multi-sided projects easy. When glued together, the routed end hugs the mating piece preventing any slippage. Using these bits, you will only need to cut one end as opposed to two (such as with miter joints) reducing cutting time in half bits are designed to cut at the correct angle providing extra gluing surface and a strong mechanical joint. Choose the desired bit and cut according to the amount of sides needed for your project. Set comes in a solid wood storage case. Columns, barrels and planters to name a few can grace your décor with minimal effort. Two flute carbide cutters and 1/2″ shanks. Edges can be cut either flush or protruded, then sanded down later to the desired finish. Cut face up for six or eight sided projects and face down for twelve or sixteen sided projects.

 

Yonico 15136 Glue Joint Router Bit with Medium Reversible 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

1/2” Shank Reversible Finger Joint Glue Joint Router Bit Woodwork Cutter Tool - Build-up & heat resistant teflon coating. Features this product can make professional joint. Industrial grade micro grain carbide blade. Specifications dimensions width 12/15mm length of shank 38mm overall length 86mm depth of blade 8mm body tungsten carbide package includes 1 x router bit. Perfect choice of professionals and hobbyists. Using tungsten carbide for manufacturing. Using for handmaking a drawer or other woodworking can be used for jointing wood edge to edge or end to end.

 

MLCS 8357 1/2-Inch Shank Multi-Sided Glue Joint Router Bit Set, 3-Piece - 1/2-inch shank for router table use. Top quality carbide-tipped bits. Creates strong glue joints. Cuts stock at just the right angle. Perfect for many multi-sided projects–planters, buckets, bowls, and more.

 

Yonico 15135 Reversible Glue Joint Router Bit with 1-1/4-Inch Stock 1/2-Inch Shank - Rout perfect joining cuts with one reversible bit simply set the center of the bit with the center of the stock. Run one cut face up and the adjoining cut face down. Great for edge- joining tabletops, door panels and flooring among many other glue joint projects. Two flute carbide cutters and shank is 1/2″. .

 

Yonico 15131 Reversible Finger Joint Glue Joint Router Bit 1/2-Inch Shank by Yonico - Yonico 15131 reversible finger joint glue joint router bit 1/2-inch shank. C3 micro-grain tungsten carbide cutters. Industrial quality router bits. Solid hardened steel bodies with anti-kickback design. Build-up & heat resistant teflon coating.

 

Yonico 15138 Bird’s Mouth Glue Joint Router Bit with 8 Sided 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Yonico 15131 Reversible Finger Joint Glue Joint Router Bit 1/2-Inch Shank - Features • 1/2″ shank • industrial quality • c3 tungsten carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant teflon coating • lifetime warranty • satisfaction guaranteed create strong finger glue joints with the yonico 15131 router bit. . This bit can create finger joints from 7/16″ high up to 1-1/4″ high.

 

Magnate 7361 Reversible Glue Joint Router Bits – 1″ Cutting Length; 1/4″ Shank Diameter - Adjusting the bit according to the thickness of the wood, line up the cut edge of the wood to the center point of the bit. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Make the 1st cut face up, then turn the wood upside down to make the reverse matching cut. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion.

 

Magnate 7302 Glue Joint Router Bits – 1-1/4″ Cutting Length; 1/2″ Shank Diameter - In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Yonico 15139 Bird’s Mouth Glue Joint Router Bit with 6 and 12 Sided 1/2-Inch Shank - Using this bit, you will only need to cut one end as opposed to two (such as with miter joints) reducing cutting time in half this bit is designed to cut at the correct angle providing extra gluing surface and a strong mechanical joint. . Columns, barrels and planters to name a few will grace your décor with minimal effort. Two flute carbide cutters & 1/2″ shank. Edges can be cut either flush or protruded, then sanded down later to the desired finish. Cut face up for six sided projects and face down for twelve sided projects. When glued together, the routed end hugs the mating piece preventing any slippage. Multi-sided glue joint bits make joining up multi-sided projects easy.

 

Yonico 15138 Bird’s Mouth Glue Joint Router Bit with 8 Sided 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Yonico 15131q Reversible Finger Glue Joint Router Bit, 1/4″ - Solid hardened steel bodies with anti-kickback design. Build-up & heat resistant teflon coating. Satisfaction guaranteed & lifetime warranty. C3 micro-grain tungsten carbide cutters. Industrial quality router bits.

 

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 1/2-Inch Shank, Set of 3 - Two flute carbide router bit cutters and 1/2″ shanks. When positioned properly, one mitre bit will cut both pieces of stock without having to adjust the bit. With fence in place, set the center of the stock to the center of the miter bit. Additionally, lock miter cuts will provide extra gluing surface resulting in an extremely strong and durable joint.   The interlocking 45° miter lock cuts will produce extremely strong joints without having to struggle to keep boards in place during clamping. The yonico 15334 lock mitre set includes 3 of the most popular lock miter bits for a range of stock sizes. Set comes in a solid wood storage case. Then, cut one piece of stock horizontally and the second one vertically. Use the yonico 15334, 45° lock miter router bit set to join boards at 90°. The smallest miter lock bit is 1-3/8″ diameter and will work best with 1/2″ stock. The largest miter lock bit has a 2-3/4″ diameter and is suited for up to 1″ thick stock. The yonico 15334 lock miter bits set is reversible. The medium sized lock miter router bit has a 2″ diameter and is suited for 3/4″ stock.

 

Magnate 7301 Glue Joint Router Bits – 1-1/4″ Cutting Length; 1/4″ Shank Diameter - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

 

Yonico 15136 Glue Joint Router Bit with Medium Reversible 1/2-Inch Shank - Two flute carbide cutters and shank is 1/2″. Rout both joining cuts with one reversible bit simply set the center of the bit with the center of the stock. Run one cut face up and the adjoining cut face down to create a perfect joint. Great for edge- joining tabletops, door panels and even flooring, among many other glue joint projects.

 

Bosch 84505M 1-7/8-Inch Diameter 1-3/32-Inch Cut Carbide Tipped Reversable Glue Joint Router Bit 1/2-Inch Shank by Bosch - Be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing tableall bits must be inserted in the full length of the collet.

 

Yonico 15220 22.5-Degree Lock Miter Glue Joint Router Bit Set 1/2-Inch Shank - Put a 45 degree joint in place of a 90 degree angle to soften a sharp look. This set will cut 22. Set comes in a solid wood storage case. Great for 8 sided projects such as planters. Two flute carbide cutters & 1/2″ shanks. Then, you can cover the new surface with a column for added beauty. 5 degree miters to make 45 degree joints.

 

Yonico 15137 Bird’s Mouth Glue Joint Router Bit with 16 Sided 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Yonico 15330 Multi Sided Glue Joint Router Bit Set 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.