22 Top Walton Tap Extractors

 

Walton 10124 12 4 Flute Tap Extractor With Square Shank

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps.

 

Walton 11004 1 4 Flute Tap Extractor With Square Shank

Walton 11004 1″, 4 Flute Tap Extractor With Square Shank

Walton 11004 1″, 4 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Packed in 6-compartment plastic case. For removing machine screws and broken hand taps. 5 piece set contains sizes 5/16″, 3/8″, 7/16″, 1/2″, 5/8″.

 

Walton 10754 34 4 Flute Tap Extractor With Square Shank

Walton 10754 3/4″, 4 Flute Tap Extractor With Square Shank

Walton 10754 3/4″, 4 Flute Tap Extractor With Square Shank - For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton Replacement Finger for 3 Flute Tap Extractor 4 Size

Walton Replacement Finger for 3 Flute Tap Extractor, #4 Size

Walton Replacement Finger for 3 Flute Tap Extractor, #4 Size - For removing machine screws and broken hand taps. Replacement finger for walton 3 flute, tap extractors. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Made of hardened steel to help prevent the damage of the workpieces threads.

 

Walton 30313 516 3 Flute STI Tap Extractor With Square Shank

Walton 30313 5/16″, 3 Flute STI Tap Extractor With Square Shank

Walton 30313 5/16″, 3 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10053 5 3 Flute Tap Extractor With Square Shank

Walton 10053 #5, 3 Flute Tap Extractor With Square Shank

Walton 10053 #5, 3 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available.

 

Walton 20504 12 4 Flute Pipe NPT Tap Extractor With Square Shank

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20504 1/2″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank - For pipe taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. When fingers become bent or broken or are too short for further use, replacement fingers are available. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor.

 

Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18011-3 11 Piece 3 Flute Tap Extractor Set With Square Shank - For removing machine screws and broken hand taps. 11 piece set contains sizes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″. Packed in 6-compartment plastic case. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 20124 18 4 Flute Pipe NPT Tap Extractor With Square Shank

Walton 20124 1/8″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank

Walton 20124 1/8″, 4 Flute Pipe (NPT) Tap Extractor With Square Shank - Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. All walton pipe extractors are clearly marked with the proper drill size needed to drill the hole that will receive the extractor. When fingers become bent or broken or are too short for further use, replacement fingers are available. Pipe extractor taps are equipped with straight to help provide gripping strength everywhere they’re engaged. For pipe taps.

 

Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank

Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank

Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank - Packed in 6-compartment plastic case. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 30373 38 3 Flute STI Tap Extractor With Square Shank

Walton 30373 3/8″, 3 Flute STI Tap Extractor With Square Shank

Walton 30373 3/8″, 3 Flute STI Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For helical coil wire screw thread insert taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18013-3 13 Piece 3 Flute Tap Extractor Set With Square Shank - Packed in 15-compartment plastic case. 13 piece set contains sizes #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 10252 14 2 Flute Tap Extractor With Square Shank

Walton 10252 1/4″, 2 Flute Tap Extractor With Square Shank

Walton 10252 1/4″, 2 Flute Tap Extractor With Square Shank - For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10063 6 3 Flute Tap Extractor With Square Shank

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. For removing machine screws and broken hand taps.

 

Walton 10103 10 3 Flute Tap Extractor With Square Shank

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank

Walton 10103 #10, 3 Flute Tap Extractor With Square Shank - When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 6-compartment plastic case. For removing machine screws and broken hand taps. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely.

 

Walton 10043 4 3 Flute Tap Extractor With Square Shank

Walton 10043 #4, 3 Flute Tap Extractor With Square Shank

Walton 10043 #4, 3 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps.

 

Walton 10062 6 2 Flute Tap Extractor With Square Shank

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank

Walton 10062 #6, 2 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. When fingers become bent or broken or are too short for further use, replacement fingers are available. For removing machine screws and broken hand taps. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.

 

Walton 10564 916 4 Flute Tap Extractor With Square Shank

Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank

Walton 10564 9/16″, 4 Flute Tap Extractor With Square Shank - Threads per inch need not be specified as tap extractors will fit both nc and nf taps. When fingers become bent or broken or are too short for further use, replacement fingers are available. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. For removing machine screws and broken hand taps.

 

Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Walton 18002-3 6 Piece 3 Flute Tap Extractor Set With Square Shank - For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. Packed in 6-compartment plastic case.

 

Walton 10284 932 4 Flute Tap Extractor With Square Shank

Walton 10284 9/32″, 4 Flute Tap Extractor With Square Shank

Walton 10284 9/32″, 4 Flute Tap Extractor With Square Shank - Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.