22 Best Motor Bearings

 

SODIALR 6205RS Deep Groove Double Rubber Sealed Motor Bearing 25mm x 52mm x 15mm

SODIAL(R) 6205RS Deep Groove Double Rubber Sealed Motor Bearing 25mm x 52mm x 15mm

SODIAL(R) 6205RS Deep Groove Double Rubber Sealed Motor Bearing 25mm x 52mm x 15mm - Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Only authorized seller of sodial can sell under sodial listings. Sodial is a registered trademark. Our products will enhance your experience to unparalleled inspiration. Commonly used for wheel bearings, hvac, automotive, industrial applications and much more. The measurement allowed error is 1¡À cm. Closed with 2 rubber seals to protect the bearing from dust or any possible contamination. Sodial(r) 6205rs deep groove double rubber sealed motor bearing 25mm x 52mm x 15mmthe inner diameter is 25mm, outer diameter is 52mm and the width is 15mm.

 

Fasco D402 33-Inch General Purpose Motor 160 HP 115 Volts 3000 RPM 1 Speed 75 Amps Totally Enclosed CWSE Rotation Sleeve Bearing

Fasco D402 3.3-Inch General Purpose Motor, 1/60 HP, 115 Volts, 3000 RPM, 1 Speed, .75 Amps, Totally Enclosed, CWSE Rotation, Sleeve Bearing

Fasco D402 3.3-Inch General Purpose Motor, 1/60 HP, 115 Volts, 3000 RPM, 1 Speed, .75 Amps, Totally Enclosed, CWSE Rotation, Sleeve Bearing - 00 full load amps 0. 3 shaft dia. 40 degrees c no. Class a max. Rugged, single-phase motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. 75 hz 60 motor shaft rotation cwse ins. 3 motor service factor 1. Ambient temp. Of speeds 1 motor mounting type stud motor bearings sleeve motor thermal protection auto body dia. Pattern 2-7/8 x 2-7/8 phase 1 motor shaft design flat application hvac/r rpm range 1801-3000 mounting pattern 2-7/8 x 2-7/8. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design shaded pole motor enclosure design totally enclosed nonventilated duty continuous hp 1/60 nameplate rpm 3000 voltage 115 frame 3. 1/4 shaft length 1-3/4 length less shaft 2-3/8 mounting stud location 4/both ends stud/base mtg. This listing is for each. 3.

 

DYNAMIC MIXER Motor Bearing 601

DYNAMIC MIXER Motor Bearing 601

DYNAMIC MIXER Motor Bearing 601 - 025 lb height 5/16″ outer diameter 7/8″ inner diameter 5/16″ part reference info dynamic 601 dynamic usa 601 model reference info dynamic immersion blender models mx2000, mx91, smx800dsc. Specifications weight.

 

DYNAMIC USA Motor Bearing 601

DYNAMIC USA Motor Bearing 601

DYNAMIC USA Motor Bearing 601 - Specifications weight. 025 lb height 5/16″ outer diameter 7/8″ inner diameter 5/16″ part reference info dynamic 601 dynamic usa 601 model reference info dynamic immersion blender models mx2000, mx91, smx800dsc.

 

Fasco D125 33-Inch General Purpose Motor 150 HP 115 Volts 1500 RPM 1 Speed 75 Amps Totally Enclosed CCWSE Rotation Sleeve Bearing

Fasco D125 3.3-Inch General Purpose Motor, 1/50 HP, 115 Volts, 1500 RPM, 1 Speed, .75 Amps, Totally Enclosed, CCWSE Rotation, Sleeve Bearing

Fasco D125 3.3-Inch General Purpose Motor, 1/50 HP, 115 Volts, 1500 RPM, 1 Speed, .75 Amps, Totally Enclosed, CCWSE Rotation, Sleeve Bearing - Rugged, single-phase motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. Class b max. This listing is for each. 1/4 shaft length 2-1/4 length less shaft 2-1/2 mounting stud location 4/both ends stud/base mtg. Pattern 2-7/8 x 2-7/8 phase 1 motor shaft design flat application hvac/r rpm range 1401-1500 mounting pattern 2-7/8 x 2-7/8. Of speeds 1 motor mounting type stud motor bearings sleeve motor thermal protection auto body dia. Ambient temp. 80 hz 60 motor shaft rotation ccwse ins. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design shaded pole motor enclosure design totally enclosed nonventilated duty continuous hp 1/50 nameplate rpm 1500 voltage 115 frame 3. 3 motor service factor 1. 3 shaft dia. 3. 00 full load amps 0. 40 degrees c no.

 

Fasco D1161 33-Inch Diameter Shaded Pole Motor 115-125 HP 115 Volts 1500 RPM 1 Speed 29-19 Amps CCW Rotation Sleeve Bearing

Fasco D1161 3.3-Inch Diameter Shaded Pole Motor, 1/15-1/25 HP, 115 Volts, 1500 RPM, 1 Speed, 2.9-1.9 Amps, CCW Rotation, Sleeve Bearing

Fasco D1161 3.3-Inch Diameter Shaded Pole Motor, 1/15-1/25 HP, 115 Volts, 1500 RPM, 1 Speed, 2.9-1.9 Amps, CCW Rotation, Sleeve Bearing - Rugged, single-phase motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. 3 motor service factor 1. 9 hz 60 motor shaft rotation ccwse ins. 40 degrees c no. 00 full load amps 2. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design shaded pole motor enclosure design open dripproof duty continuous hp 1/15 nameplate rpm 1600 voltage 115 frame 3. 3 shaft dia. 3. Ambient temp. 5/16 shaft length 2 length less shaft 4-1/4 phase 1 motor shaft design flat application hvac/r rpm range 1501-1600. Class b max. Of speeds 2 motor mounting type lug motor bearings sleeve motor thermal protection auto body dia. This listing is for each.

 

Fasco D1139 33-Inch Diameter Shaded Pole Motor 150-180-1125 HP 115 Volts 1500 RPM 3 Speed 088 Amps CW Rotation Sleeve Bearing

Fasco D1139 3.3-Inch Diameter Shaded Pole Motor, 1/50-1/80-1/125 HP, 115 Volts, 1500 RPM, 3 Speed, 0.88 Amps, CW Rotation, Sleeve Bearing

Fasco D1139 3.3-Inch Diameter Shaded Pole Motor, 1/50-1/80-1/125 HP, 115 Volts, 1500 RPM, 3 Speed, 0.88 Amps, CW Rotation, Sleeve Bearing - Of speeds 3 motor mounting type stud motor bearings sleeve motor thermal protection auto body dia. Ambient temp. Rugged, single-phase motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design shaded pole motor enclosure design totally enclosed nonventilated duty continuous hp 1/50 nameplate rpm 1550 voltage 115 frame 3. 40 degrees c no. This listing is for each. 5/16 shaft length 2-1/2 length less shaft 2-3/4 mounting stud location 4/opposite lead end stud/base mtg. Class b max. 3 shaft dia. 90 hz 60 motor shaft rotation cwse ins. 00 full load amps 0. 3 motor service factor 1. 3. Pattern 2-7/8 x 2-7/8 phase 1 motor shaft design flat application hvac/r rpm range 1501-1600 mounting pattern 2-7/8 x 2-7/8.

 

Ridgid 17963 Motor with Bearing

Ridgid 17963 Motor, with Bearing

Ridgid 17963 Motor, with Bearing - This product manufacture by mexico. 17963 motor, w/bearing. This item is used for power tool accessories , router bits & accessories.

 

TOOGOOR 6205RS Deep Groove Double Rubber Sealed Motor Bearing 25mm x 52mm x 15mm

TOOGOO(R) 6205RS Deep Groove Double Rubber Sealed Motor Bearing 25mm x 52mm x 15mm

TOOGOO(R) 6205RS Deep Groove Double Rubber Sealed Motor Bearing 25mm x 52mm x 15mm - Commonly used for wheel bearings, hvac, automotive, industrial applications and much more. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Toogoo(r) 6205rs deep groove double rubber sealed motor bearing 25mm x 52mm x 15mmthe inner diameter is 25mm, outer diameter is 52mm and the width is 15mm. Toogoo is a registered trademark. Closed with 2 rubber seals to protect the bearing from dust or any possible contamination. Only authorized seller of toogoo can sell under toogoo listings. Our products will enhance your experience to unparalleled inspiration. The measurement allowed error is 1¡À cm.

 

Series 60 PD Motors Bearing Assemblies 3-Piece

Series 60 & PD Motors Bearing Assemblies, 3-Piece

Series 60 & PD Motors Bearing Assemblies, 3-Piece - Brand bell & gossett. Free shipping on this item. Product number 189162. Category hvac.

 

Electrolux 002699 Motor Bearing Cavity

Electrolux 002699 Motor Bearing Cavity

Electrolux 002699 Motor Bearing Cavity - Electrolux genuine oem replacement part. For over 90-years electrolux has been committed to making your life better by integrating simple, intuitive design with fresh innovations. Use genuine oem parts for safety reliability and performance. 002699, s cavity mototr bearing. .

 

DYNAMIC MIXER 0602 MOTOR BEARING

DYNAMIC MIXER 0602 MOTOR BEARING

DYNAMIC MIXER 0602 MOTOR BEARING - 06 lbs. 1″ od dynamic smx(600dsc-115v, 600e, 800e) specifications ship weight 0.

 

Fasco D405 33-Inch Diameter PSC Motor 110 HP 115 Volts 3000 RPM 1 Speed 14 Amps REV Rotation Ball Bearing

Fasco D405 3.3-Inch Diameter PSC Motor, 1/10 HP, 115 Volts, 3000 RPM, 1 Speed, 1.4 Amps, REV Rotation, Ball Bearing

Fasco D405 3.3-Inch Diameter PSC Motor, 1/10 HP, 115 Volts, 3000 RPM, 1 Speed, 1.4 Amps, REV Rotation, Ball Bearing - 4 hz 60 motor shaft rotation cw/ccw ins. This listing is for each. 5/16 shaft length 3-1/4 length less shaft 4-1/4 mounting stud location 4/both ends stud/base mtg. 3 motor service factor 1. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design permanent split capacitor motor enclosure design totally enclosed nonventilated duty continuous hp 1/10 nameplate rpm 3200 voltage 115 frame 3. 3 shaft dia. Pattern 2-7/8 x 2-7/8 phase 1 motor shaft design flat application hvac/r rpm range 3001-3600 includes 4 mfd/370 vac capacitor mounting pattern 2-7/8 x 2-7/8 capacitor required yes. Ambient temp. Class b max. Of speeds 1 motor mounting type stud motor bearings ball motor thermal protection auto body dia. 40 degrees c no. Single-phase psc motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. 3. 00 full load amps 1. Includes capacitor.

 

PENNBARRY Motor and Bearing Mounting Bracket 11204-0

PENNBARRY Motor and Bearing Mounting Bracket 11204-0

PENNBARRY Motor and Bearing Mounting Bracket 11204-0 - 635 lb part reference info pennbarry 11204-0 model reference info pennbarry models d10 pennbarry exhaust unit models 40378-15, 40379-2, 40379-23, 40383-15. Specifications height 14 9/16″, 370 mm width 14″, 356 mm depth 13 3/4″, 349 mm material steel thickness 1/8″, 3 mm weight 11.

 

Bell Gossett M23250 Motor Bearing

Bell & Gossett M23250 Motor Bearing

Bell & Gossett M23250 Motor Bearing - Category hvac. Product number 185260. Brand bell & gossett. Free shipping on this item.

 

Fasco D128 33-Inch General Purpose Motor 140 HP 115 Volts 1500 RPM 3 Speed 13 Amps OAO Enclosure Double Shaft Sleeve Bearing

Fasco D128 3.3-Inch General Purpose Motor, 1/40 HP, 115 Volts, 1500 RPM, 3 Speed, 1.3 Amps, OAO Enclosure, Double Shaft, Sleeve Bearing

Fasco D128 3.3-Inch General Purpose Motor, 1/40 HP, 115 Volts, 1500 RPM, 3 Speed, 1.3 Amps, OAO Enclosure, Double Shaft, Sleeve Bearing - 3 hz 60 motor shaft rotation ccwle ins. Pattern 2-7/8 x 2-7/8 phase 1 motor shaft design flat application hvac/r rpm range 1401-1500 mounting pattern 2-7/8 x 2-7/8. This listing is for each. 3. 3 shaft dia. 40 degrees c no. 3 motor service factor 1. Rugged, single-phase motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. Of speeds 3 motor mounting type stud motor bearings sleeve motor thermal protection auto body dia. Ambient temp. Class b max. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design shaded pole motor enclosure design open dripproof duty continuous hp 1/40 nameplate rpm 1500 voltage 115 frame 3. 5/16 shaft length 4 length less shaft 2-1/2 mounting stud location 4/both ends stud/base mtg. 00 full load amps 1.

 

Mazzer Motor Bearing

Mazzer Motor Bearing

Mazzer Motor Bearing - “tool-less” blade change and shoe adjustment. Built-in dust blower clears the line of cut for greater accuracy. Long 1-1/8 stroke for faster cutting. Mazzer motor bearing. Variable speed trigger for precise cutting in a wide variety of applications.

 

Series 60 PD Motors Bearing Assembly

Series 60 & PD Motors Bearing Assembly

Series 60 & PD Motors Bearing Assembly - Product number 185260. Brand bell & gossett. Free shipping on this item. Category hvac.

 

Fasco D123 33-Inch General Purpose Motor 180 115 Volts 1500 RPM 1 Speed 6 Amps Totally Enclosed CCWSE Rotation Sleeve Bearing

Fasco D123 3.3-Inch General Purpose Motor, 1/80, 115 Volts, 1500 RPM, 1 Speed, .6 Amps, Totally Enclosed, CCWSE Rotation, Sleeve Bearing

Fasco D123 3.3-Inch General Purpose Motor, 1/80, 115 Volts, 1500 RPM, 1 Speed, .6 Amps, Totally Enclosed, CCWSE Rotation, Sleeve Bearing - Ambient temp. 00 full load amps 0. 3. Class b max. This listing is for each. Of speeds 1 motor mounting type stud motor bearings sleeve motor thermal protection auto body dia. 60 hz 60 motor shaft rotation ccwse ins. 3 motor service factor 1. 3 shaft dia. Rugged, single-phase motor is designed for use in air-moving or mechanical applications, including fans, hvac, pumps, and compressors. 1/4 shaft length 2-1/4 length less shaft 2-3/8 mounting stud location 4/both ends stud/base mtg. 40 degrees c no. Pattern 2-7/8 x 2-7/8 phase 1 motor shaft design flat application hvac/r rpm range 1401-1500 mounting pattern 2-7/8 x 2-7/8. Technical specification item hvac motor motor application hvac/r motor sub application direct drive fan/blower motor design shaded pole motor enclosure design totally enclosed nonventilated duty continuous hp 1/80 nameplate rpm 1500 voltage 115 frame 3.

 

Unit Bearing Motor Shaded Pole 38 In L

Unit Bearing Motor, Shaded Pole, 3/8 In. L

Unit Bearing Motor, Shaded Pole, 3/8 In. L - Voltage compatibility 115, 120, 115/208-230, 115/230, 120/240 hp 1/85 ins class b full load amps 060 country of origin (subject to change) united states. Motor design shaded pole includes speed nut, mounting screws motor service factor 100 motor thermal protection auto length less shaft 2-1/2″ body dia 3-1/2″ motor bearings unit voltage 115 motor shaft design threaded shaft length 3/8″ shaft dia 1/4″ overall length 2-7/8″ bolt circle dia 2-13/16″ output watts 9 nameplate rpm 1550. Price for each hz 60 motor shaft rotation cwle frame non-standard frame material cast iron phase 1 motor mounting type rear/foot max ambient temp 40 degrees c motor sub application refrigerator/freezer motor application hvac/r motor enclosure design totally enclosed air-over item unit bearing motor motor mounting position all angle.

 

Electric Motor Bearing with Steel Mount 78 Inch Shaft

Electric Motor Bearing with Steel Mount 7/8 Inch Shaft

Electric Motor Bearing with Steel Mount 7/8 Inch Shaft - 5-1/2 in width x 23 in height x 1-1/2 in depth, 27 oz weight also available for 5/8 in shaft. Grease-lubricated steel bearings, external brass grease zerk. Cast-steel mount with 1/2 in mounting holes, 4 in on-center. Steel bushing fits shafts to 7/8 in diameter, two hex set screws. Bearing with cast steel mount for use with shaft-driven tools & accessories.

 

General Motors BEARING 6559469

General Motors, BEARING, 6559469

General Motors, BEARING, 6559469 - 1992-2005 buick lesabre. This part is a genuine gm original equipment manufacturer (oem) item. 1997-2005 buick century. 1991-1996 buick commercial chassis. 1997-2005 buick park avenue. The compatibility information by amazon should be used for reference purposes only to ensure compatibility, visit the sellers page to send a message containing the vehicles vin.