Sungold Abrasives 67663 Premium X-Weight Cloth Aluminum Oxide 60 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- Full resin on resin bond offers extended belt life and medium open coat is excellent for reduced loading. Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. Fits jet sanders. For use on wood metal plastic paint removal heavy stock removal. P graded aluminum oxide grain provides fast smooth cut while fracturing to create new cutting services extending abrasive life.
Powermatic 1791293 Model OES9138 3 HP 3-Phase Oscillating Edge Sander
- Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking. Pedestal control switch for easy access. Oscillates 24 cycles per minute for better finish and longer belt life. 9-1/2-inch by 48-inch platen with graphite pad offers largest work surface in its class. 3 hp motor with 9-inch by 138-3/4-inch abrasive belt handles large workpieces.
Sungold Abrasives 67665 Premium X-Weight Cloth Aluminum Oxide 100 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. Full resin on resin bond offers extended belt life and medium open coat is excellent for reduced loading. For use on wood metal plastic paint removal heavy stock removal. P graded aluminum oxide grain provides fast smooth cut while fracturing to create new cutting services extending abrasive life. Fits jet sanders.
Woodtek 924097, Machinery, Sanders, 6″ X 108″ Edge Sander 2hp 1ph
- Imported. One year parts and workmanship warranty. Protect your machinery from restarts after a power outage. . Enclosed in durable plastic housings with a rubber gasket between the cover and body, woodtek® single or three phase magnetic motor switches are designed for indoor use with almost any 1-, 2-, 3- or 5hp motor besides protecting against thermal overload, switches automatically shut off if electricity goes off to avoid starting up when power comes back on. Schematic diagram included (knowledge of wiring basics required). Recessed start button helps avoid accidental starting. Knockouts threaded for conduit connection or wire pigtail grip connector.
Ridgid EB4424 Sander, Oscillating/Edge Belt
- Two machines in one, combines edge belt and spindle sanding in one high performance tool. This item is sander, oscillating edge 14663. This product manufacture by taiwan. Oscillating and rotary motion, for fast, burn-free finishes on edges, faces, contours, inside and outside curves. This product is used for power-detail-sanders. Ball bearing construction. On-board accessory storage. Tool free conversion from belt to spindle.
Laguna Tools MSANOES6X89-1.5-0320 6/89T Edge Sander, Black
- • Motor 15 hp, 110 v, 18 amp • rpm 3,450 • belt size 6″ x 89″. • Oscillation 1/2″ • dust-port 4″. • dimensions 51″ x 20″ x 45″ • weight (net/ship) 258/273 lbs. • Front table 10″ x 30″ • table heights 38″ min, 41″ max • platen tilt 0, 90. • Platen size 7″ x 33″ (graphite) • end table 10″ x 12″ • belt speed 3,900 rpm.
FastCap Fast Break XL Sharp Edgebanding and Hardwood Sander
- The fastbreak includes 80 and 180 grit. Break both edges on sharp melamine, edgebanding, and hardwood materials. The fastcap fast break xl is designed to break both edges in one pass on melamine, edgebanding, and doors.
Sungold Abrasives 67664 Premium X-Weight Cloth Aluminum Oxide 80 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- For use on wood metal plastic paint removal heavy stock removal. Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. P graded aluminum oxide grain provides fast smooth cut while fracturing to create new cutting services extending abrasive life. Full resin on resin bond offers extended belt life and medium open coat is excellent for reduced loading. Fits jet sanders.
HTC HSJ-359 Mobile Base; fits Bridgewood Edge Sander model #BW-80A, Jet Edge Sander Model #EHVS-80
- 500lb capacity. Opens up additional shop space. Fits machine size of 135″x195″. Move your machine anywhere with ease. Heavy duty welded steel construction.
Sait 61056 6 Inch X 132 Inch 100 Grit Edge Sander Sanding Belt.
- Sait 61056 6 inch x 132 inch 100 grit edge sander sanding belt. Heavy duty welded steel construction. 500lb capacity. Opens up additional shop space. Fits machine size of 135″x195″.
Sungold Abrasives 67669 Premium X-Weight Cloth Silicon Carbide 240 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. For use on wood metal plastic paint glass mirrors knives and for any fine finishing application. Fits jet sanders. P graded silicon carbide provides sharp consistent cut for the perfect finish.
Sungold Abrasives 67667 Premium X-Weight Cloth Silicon Carbide 150 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. P graded silicon carbide provides sharp consistent cut for the perfect finish. For use on wood metal plastic paint glass mirrors knives and for any fine finishing application. Fits jet sanders.
Woodtek 148259, Machinery, Sanders, 6″ X 108″ Osc Edge Sander 2hp 1ph
- Note although deemed accurate, specifications are not guaranteed. Belt speed, 3,100 fpm. Drive/idler roller, 6-7/8″ dia. Dust port, 4″ dia. Belt size, 6″ x 108″ (belt oscillates 3/8″, 40 opm). The woodtek® 6″ x 108″ oscillating edge sander features a main table that adjusts easily for full use of the abrasive belt surface and an independent auxiliary table that allows use of the idler roller as a drum sander tracking and tension are easily adjusted using up-front controls. Platen, 6″ x 39″. Auxiliary table, 11-5/8″ x 18-7/8″ w/9-1/2″ travel. Shipping weight, 438 lbs. Heavy steel base helps reduce vibration and adds stability. Oscillating sanders improve surface quality and extend belt life. Specifications motor, 2hp, 120/240v, 20a/10a, 1ph or 3ph, 1,725 rpm. /3″ dia. Net weight, 378 lbs. One-year parts and workmanship warranty. Main table, 7-3/4″ x 37″ w/7-1/4″ travel. On/off switch, push button, magnetic w/thermal protection. Overall dimensions, 41″h x 62″w x 24″d. Sanding belt, graphite-coated platen, wrenches, hardware and instructions included. Imported.
Sungold Abrasives 67670 Premium X-Weight Cloth Silicon Carbide 400 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- For use on wood metal plastic paint glass mirrors knives and for any fine finishing application. Fits jet sanders. P graded silicon carbide provides sharp consistent cut for the perfect finish. Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break.
Sungold Abrasives 67668 Premium X-Weight Cloth Silicon Carbide 180 Grit Edge Sander Belt (Pack of 2), 6″ by 89″
- For use on wood metal plastic paint glass mirrors knives and for any fine finishing application. P graded silicon carbide provides sharp consistent cut for the perfect finish. Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. Fits jet sanders.
SHOP FOX W1730 Oscillating Edge Sander
- Three spindle sanding drums, measuring 1-1/2, 2, and 3-inches in diameter are included for sanding smaller curved surfaces. This sander features a 6 x 89-inch belt that oscillates 3/4-inch vertically at fifty two times per minute it also has a quick release belt tension lever, a 0 to 90 degree tilting graphite-coated platen, and a 2 hp motor. The w1730 has a 26-7/8 x 12-inch cast iron main table for edge sanding and a 10 x 11-1/2-inch cast iron auxiliary table for spindle sanding. Other features include a 180 degree adjustable miter gauge, two 4-inch dust ports, a powder-coated finish, and a removable fence. .
Sungold Abrasives 67655 Premium X-Weight Cloth Aluminum Oxide 100 Grit Edge Sander Belt (Pack of 2), 6″ by 80″
- Extra strong tape joint can be run in both directions for extended life and quicker belt changes and won’t break. Full resin on resin bond offers extended belt life and medium open coat is excellent for reduced loading. For use on wood metal plastic paint removal heavy stock removal. P graded aluminum oxide grain provides fast smooth cut while fracturing to create new cutting services extending abrasive life.
Shop Fox W1688 1.5-Horsepower 6-Inch by 80-Inch Edge Sander
- You will appreciate the balance this edge sander strikes between industrial-like quality and a compact size that won’t hog precious shop space. Solid features like the graphite coated cast iron platen, the precision ground cast iron tables, and the super stable powder coated stand will make this edge sander a lifetime investment. Equally important, the quick release belt tension lever makes changing belts a breeze and all controls are thoughtfully placed for convenient access.
FASTBREAK Dual Edge Sander
- Just one pass with this sanding tool and you’re done. Allows uniform sanding in one pass. Increases speed & efficiency.
FastCap Fast Break Sharp Edgebanding and Hardwood Sander
- Break both edges on sharp melamine, edgebanding, and hardwood materials. The fastcap fast break is designed to break both edges in one pass on melamine, edgebanding, and doors. The fastbreak includes 80 and 180 grit.
Delta 31-482 6 in X 89 in Oscillating Edge Sander
- Width max depth belt horizontal, including lever 23 in. Max height belt vertical, including lever 49 in. , Aluminum base dimensions 16 1/4 in. Length sanding drum table 9 3/4 in. Depth x 11 3/4 in. Motor 1 1/2 hp, 115v/230v (wired 230v), 1 phase, tefc belt speeds 3,900 sfpm 108 opm main table 10 in. Lowest table height 38 in. Length drum size 4 1/4 in. Depth x 29 3/4 in. Depth x 21 1/4 in. 6-inch by 89-inch oscillating edge sander 1 1/2 hp, 115/230v (wired 230v) 1 phase motor oscillating belt 108 opm belt speed 3,900 fpm cast iron tilt table cast iron contour sanding table fence dust hood miter guage backstops & tracking tool. Max width drum support table, mounted 50 in.
JET 708447 OES-80CS 6-Inch 1-1/2-Horsepower Oscillating Edge Sander, 115/230-Volt 1-Phase
- 6-by-89-inch belt moves at 3,900 surface feet per minute and has an increased lifespan. Jet oscillating edge aggressive sander with 1-1/2 horsepower, 115-volt pre-wired, 230-volt wired single-phase motor. Includes attachments for both vertical and horizontal applications. Produce bevels, angles, curves, and flat surfaces. 32-by-7-inch, adjustable work table for added convenience weighs 270-pounds.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
