21 Most Wanted Npt Tapers

 

Hanson 8203 Tap 14-18 Npt Taper for Tap Die Extraction

Hanson 8203 Tap 1/4-18 Npt Taper for Tap Die Extraction

Hanson 8203 Tap 1/4-18 Npt Taper for Tap Die Extraction - This taper tap is ideal for pipe fittings. Taps are tapered at a rate of 3/4 inches per foot. Each taper tap is used to cut internal threads in pipes. Nominal size of the tap is that of the pipe fitting being tapped. 1/4″ size with 18 npt (national pipe taper).

 

Morse Cutting Tools 36126 Taper Pipe Taps High-Speed Steel Bright Finish NPT Regular Thread 4 Flutes 12-14 Size

Morse Cutting Tools 36126 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/2″-14″ Size

Morse Cutting Tools 36126 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/2″-14″ Size - Assembly requires the use of a thread sealant to ensure a tight seal. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads.

 

RedLine Tools RT34308 - 38-18 H5 Limit Oxide Coated HSS High-Speed Steel NPT Taper Pipe Tap

RedLine Tools RT34308 – 3/8-18, H5 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT34308 – 3/8-18, H5 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap - Made in the usa. Thread size/pitch 3/8-18. Thread limit h5. Coating oxide coated. Type npt interrupted, taper pipe.

 

Irwin 1904 Hanson 38-18 Npt Taper Pipe Tap

Irwin 1904 Hanson 3/8″-18 Npt Taper Pipe Tap

Irwin 1904 Hanson 3/8″-18 Npt Taper Pipe Tap - Tapered at a rate of 3/4″ per foot. Ideal for pipe fittings. Available in national pipe taper (npt) and british standard pipe taper (bsp). Nominal size of the tap is that of the pipe fitting being tapped. Cuts internal threads in pipes.

 

Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies Carbon Steel 1 Outside Diameter 38 Thick 18 27 Size

Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies, Carbon Steel, 1″ Outside Diameter, 3/8″ Thick, 1/8″, 27 Size

Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies, Carbon Steel, 1″ Outside Diameter, 3/8″ Thick, 1/8″, 27 Size - Round dies are designed for cutting external screw threads, either by hand, using a die stock or by machine, using a floating die holder. Solid round dies are non-adjustable.

 

Morse Cutting Tools 36124 Taper Pipe Taps High-Speed Steel Bright Finish NPT Regular Thread 4 Flutes 14-18 Size

Morse Cutting Tools 36124 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/4″-18″ Size

Morse Cutting Tools 36124 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/4″-18″ Size - Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Assembly requires the use of a thread sealant to ensure a tight seal. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips.

 

Kodiak Cutting Tools KODIAK233770 USA Made NPT Taper Pipe Threading Tap 5 Flutes Ground Threads High Speed Steel 11250 Shank 1-34 Thread Length 3-34 Overall Length 1-11-12 Size

Kodiak Cutting Tools KODIAK233770 USA Made NPT Taper Pipe Threading Tap, 5 Flutes, Ground Threads, High Speed Steel, 1.1250″ Shank, 1-3/4″ Thread Length, 3-3/4″ Overall Length, 1-11-1/2 Size

Kodiak Cutting Tools KODIAK233770 USA Made NPT Taper Pipe Threading Tap, 5 Flutes, Ground Threads, High Speed Steel, 1.1250″ Shank, 1-3/4″ Thread Length, 3-3/4″ Overall Length, 1-11-1/2 Size - 1250″ shank 1-3/4 thread length 3-3/4″ overall length 5 flute pipe threading tap for national pipe taper threads. 1-11-1/2 npt taper pipe tap 1.

 

Morse Cutting Tools 86332 MARXBORE NPT Taper Pipe Taps High Speed Steel Gold and Black Finish 4 Flutes 38 - 18 Size

Morse Cutting Tools 86332 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 4 Flutes, 3/8″ – 18 Size

Morse Cutting Tools 86332 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 4 Flutes, 3/8″ – 18 Size - Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads and improved thread quality. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Assembly requires the use of a thread sealant to ensure a tight seal. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials.

 

38 - 18 NPT Taper Pipe Die

3/8″ – 18 NPT Taper Pipe Die

3/8″ – 18 NPT Taper Pipe Die - Carbon steel. 3/8″, 18 npt taper pipe die. Outside diameter is 38mm.

 

Kodiak Cutting Tools KCT212023 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads Ground Threads High Speed Steel 4 Flute 03125 Shank 1116 Thread Length 2-18 Overall Length 116-27 Size

Kodiak Cutting Tools KCT212023 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, 0.3125″ Shank, 11/16 Thread Length, 2-1/8″ Overall Length, 1/16-27 Size

Kodiak Cutting Tools KCT212023 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, 0.3125″ Shank, 11/16 Thread Length, 2-1/8″ Overall Length, 1/16-27 Size - 1/16-27 npt taper pipe tap. . 3125″ shank 11/16 thread length 2-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads.

 

Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap Ground Threads High Speed Steel Pipe Threading Tap 4 Flute 06875 Shank 1-38 Thread Length 3-18 Overall Length 12-14 Size

Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.6875″ Shank, 1-3/8 Thread Length, 3-1/8″ Overall Length, 1/2-14 Size

Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.6875″ Shank, 1-3/8 Thread Length, 3-1/8″ Overall Length, 1/2-14 Size - 1/2-14 npt taper pipe tap. . 6875″ shank 1-3/8 thread length 3-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads.

 

RedLine Tools RT34406 - 14-18 H4 Limit TiN Coated HSS High-Speed Steel NPT Taper Pipe Tap

RedLine Tools RT34406 – 1/4-18, H4 Limit, TiN Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT34406 – 1/4-18, H4 Limit, TiN Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap - Type npt, taper pipe. Thread limit h4. Coating tin coated. Made in the usa. Thread size/pitch 1/4-18.

 

Kodiak Cutting Tools KODIAK212056 USA Made NPT Taper Pipe Tap Ground Threads High Speed Steel Pipe Threading Tap 4 Flute 05625 Shank 1-116 Thread Length 2-716 Overall Length 14-18 Size

Kodiak Cutting Tools KODIAK212056 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.5625″ Shank, 1-1/16 Thread Length, 2-7/16″ Overall Length, 1/4-18 Size

Kodiak Cutting Tools KODIAK212056 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.5625″ Shank, 1-1/16 Thread Length, 2-7/16″ Overall Length, 1/4-18 Size - 5625″ shank 1-1/16 thread length 2-7/16″ overall length 4 flute pipe threading tap for national pipe taper threads. . 1/4-18 npt taper pipe tap.

 

Eazypower 82615 14x18 NPT Taper Tap - Quantity 6

Eazypower 82615 1/4×18 NPT Taper Tap – Quantity 6

Eazypower 82615 1/4×18 NPT Taper Tap – Quantity 6 - 1/4×18 npt taper tap. Coating oxide coated. 1/2×14 npt taper tap. Made in the usa. Type npt interrupted, taper pipe.

 

RedLine Tools RT34408 - 38-18 H4 Limit TiN Coated HSS High-Speed Steel NPT Taper Pipe Tap

RedLine Tools RT34408 – 3/8-18, H4 Limit, TiN Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap

RedLine Tools RT34408 – 3/8-18, H4 Limit, TiN Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap - Type npt, taper pipe. Coating tin coated. Made in the usa. Thread limit h4. Thread size/pitch 3/8-18.

 

AccusizeTools - 116-27 HSS M2 NPT Taper Pipe Tap 4 Flute ANSI Fully Ground NPT-116

AccusizeTools – 1/16″-27 HSS (M2) NPT Taper Pipe Tap, 4 Flute, ANSI, Fully Ground, #NPT-116

AccusizeTools – 1/16″-27 HSS (M2) NPT Taper Pipe Tap, 4 Flute, ANSI, Fully Ground, #NPT-116 - Thread type npt. Overall length 2-1/8”. Thread size 1/16″-27. Number of flutes 4. Thread length 11/16”.

 

Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap Ground Threads High Speed Steel Pipe Threading Tap 5 Flute 09063 Shank 1-38 Thread Length 3-14 Overall Length 34-14 Size

Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 5 Flute, 0.9063″ Shank, 1-3/8 Thread Length, 3-1/4″ Overall Length, 3/4-14 Size

Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 5 Flute, 0.9063″ Shank, 1-3/8 Thread Length, 3-1/4″ Overall Length, 3/4-14 Size - 3/4-14 npt taper pipe tap. 9063″ shank 1-3/8 thread length 3-1/4″ overall length 5 flute pipe threading tap for national pipe taper threads.

 

Morse Cutting Tools 86336 MARXBORE NPT Taper Pipe Taps High Speed Steel Gold and Black Finish 5 Flutes 1-14 - 11-12 Size

Morse Cutting Tools 86336 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 1-1/4″ – 11-1/2 Size

Morse Cutting Tools 86336 MARXBORE NPT Taper Pipe Taps, High Speed Steel, Gold and Black Finish, 5 Flutes, 1-1/4″ – 11-1/2 Size - Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads and improved thread quality. Assembly requires the use of a thread sealant to ensure a tight seal. Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials.

 

Eazypower 82613 18x27 NPT Taper Tap - Quantity 6

Eazypower 82613 1/8×27 NPT Taper Tap – Quantity 6

Eazypower 82613 1/8×27 NPT Taper Tap – Quantity 6 - 1/4×18 npt taper tap. Coating oxide coated. 3/8×18 npt taper tap. 1/2×14 npt taper tap. 1/8×27 npt taper tap.

 

HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set 14~1-14 Inch

HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set, 1/4~1-1/4 Inch

HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set, 1/4~1-1/4 Inch - ~ ideal for pipe fitting. ~ High speed steel. ~ Cuts internal threads in pipes. ~ Tapered at a rate of 3/4″ per foot. ~ Includes 1 each of the following sizes 1/4~18, 3/8~18, 1/2~14, 3/4~14, 1~11-1/2, 1-1/4~11-1/2. 6 piece npt taper piper tap set ~ thread ground.

 

RedLine Tools RTY7011 - 12-14 Oxide Coated Powdered Metal Steel NPT Taper Pipe Tap

RedLine Tools RTY7011 – 1/2-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap

RedLine Tools RTY7011 – 1/2-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap - Thread limit. Type npt, taper pipe. Thread size/pitch 1/2-14. Coating oxide coated. Made in the usa.