Scheppach 120 Jig Accessory For Tiger Wet-Grinding Machine
- Jig 120 for sharpening knives with a blade length of 100, 200mm. Accessory for the scheppach tiger wet-grind system.
Kreg Tool Company KJHD Jig With SK03 Pocket-Hole Screws And Deluxe Accessory Kit
- Face clamp locks into kreg jig hd for secure drilling. For use with 1-1/2-inch materials and up. Works in the kreg jig and kreg jig master system. Screw specification-washerhead, no14, 2-1/2-inch, weather-coated, self-tapping tip. 50-percent stronger than standard pocket-holes.
MicroJig TJ-5000 Microdial Tapering Jig With GR-200 Advanced 3D Pushblock And 1/8-Inch Leg Accessory
- Infinite taper adjustments between 0 and 10 degrees. Cut up to 8-sided tapered legs together with the grr-ripper 3d pushblock. Precision taper cuts as accurate as 1/8 of a degree. Two independent memorylocks keeps angles for repeat taper cuts. Full instructional dvd and bonus project plans included.
Scheppach 60 Jig Accessory For Tiger Wet-Grinding Machine
- Jig 60 for grinding knives with a blade length of 40, 100 mm and drawknives. Accessory for the scheppach tiger wet-grind system.
Miter Track Mount Kit for Custom Jigs Feather boards Stops Accessories 3/8″x 3/4″
- Mount feather boards, custom made jigs and accessories to any 3/4″ x 3/8″ slot in the tables of many power tools. Periodically disconnect power and test for movement. Tighten and then forcefully test for no movement between the accessory, the mount, and the slot before supplying power to the tool. . Tighten as needed.
Microjig Grr-Ripper 3D Pushblock with Handle Bridge Kit & Accessory
- 16-gauge steel stand with powder-coated finish. 36″ anodized aluminum with t-square style saw carriage and laminate surface. 1″ thick table surface with vibration-reducing mdf core. Built-in dust collection and jointing feature. 24″ x 32″ table with easy-slide laminate surface.
Leigh Accessory Kit for Super 12″ Dovetail Jig, Bits and VRS
- Includes 1/4″ x 8 degree dovetail 5/16″ x 8 degree dovetail 3/8″ x 8 degree dovetail 7/16″ x 8 degree dovetail 1/2″ x 10 degree dovetail 1/2″ x 12 degree dovetail 1/2″ x 18 degree dovetail. Leigh super jig accessory kits include a vacuum and router support (vrs) and 7-piece boxed leigh router bit set. The 7-piece set features 8mm shank bits. Leigh’s ingenious vrs provides router support and dust-free routing.
Microjig Grr-Ripper 3D Pushblock w/ MicroJig TJ-5000 Microdial Tapering Jig & Microjig GRR-Ripper Gravity Heel Accessory Kit
- The patented grr-ripper is a 3d pushblock system that offers superior precision, control and safety on your table saw and other major woodworking machinery. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock agains the fence, and forward pressure to prevent burning. Includes • microjig grr-ripper 3d pushblock • microjig tj-5000 microdial tapering jig • microjig grr-ripper gravity heel accessory kit. The powerful green grr-rip gives you a commanding hold over the work piece for total control. The grr-ripper comes with a 2-hour advanced techniques dvd featuring over 30 unique uses on the table saw, router table, jointer, and band saws. The grr-ripper has three legs to give you three-directions of control on the keeper and off-cut workpiece.
Leigh Super 12″ Dovetail Jig With Accessory Kit
- Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. Markings clearly indicate the adjustment direction necessary for the desired change. Settings are changed using the included pin wrench and the uniquely shaped locking nut makes tightening the e-bush a snap. Includes 1/2″-8 degree dovetail bit, 1/2″-14 degree dovetail bit, 5/16″ straight bit, 1/2″ to 8mm collet reducer, sliding dovetail fence, half-blind bridge piece material, e-bush, fully illustrated user guide and instructional dvd. A simple twist of the e-bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails. Very precise adjustments for fit are made easily with the e-bush. Variably spaced through and half-blind dovetails are standard on all super jigs. Easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non-slip material applied to each clamping surface. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, guaranteeing a half pin at each edge of the joint, regardless of board width. The amazing joint making capability of super jigs is due in part to the revolutionary new leigh e-bush. The cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template. Rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass with the super jigs, you’re not limited to one bit and one depth of cut. No other jigs equal the versatility and precision of leigh super jigs. Super jigs offer extraordinary joint making capability at exceptional price points. The finger assembly can also produce two sizes of box joints, 5/16″ and 5/8″.
Scheppach Profiled Leather Grinding Wheel 100 Jig Accessory For Wet-Grinding Machines
- For griding the inner side of turning tools and wood work tools. Accessory for the scheppach tiger wet-grind system. Leather grinding wheel 100.
Microjig GR-100 3D Pushblock & 1/8-Inch Leg Accessory
- Built-in dust collection and jointing feature. 16-gauge steel stand with powder-coated finish. 36″ anodized aluminum with t-square style saw carriage and laminate surface. 1″ thick table surface with vibration-reducing mdf core. 24″ x 32″ table with easy-slide laminate surface.
KREG Jig Accessory Kit
- Quick change pocket hole kit this one simple kit provides everything you need to switch from drilling pocket holes to driving pocket screws in just seconds. Pocket-hole #7 screw x 1-1/4″ fine use with hardwoods such as oak, walnut, maple, cherry, hickoryfine threads provide greater holding powerwasher-head style500 pack. Cut-thread pattern prevents splitting. Quick-change pocket-hole kit 3/8″ hex-shank step drill bit snaps directly into the quick-change chuckinnovative chuck eliminates slippage and optimizes drilling power6″, #2 driver perfect for pocket screw applications7 x 1-1/4 fine, kreg pocket hole screw, zinc, 500-piece, sml-f125-500 designed for pocket-hole systems, kreg pocket-hole screws increase the strength of a pocket-hole joint. Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods. The kit includes the new 3/8″ diameter step drill bit with 1/4″ hex shank that snaps directly into the quick-change chuck with no need for an adaptor, a quick-change chuck designed to eliminate slippage and optimize drilling power, an allen wrench, a depth collar, and a 6″ long, #2 square drive bit for pocket screw applications.
MicroJig TJ-5000 Microdial Tapering Jig With GR-100 3D Pushblock And 1/8-Inch Leg Accessory
- Full instructional dvd and bonus project plans included. Infinite taper adjustments between 0 and 10 degrees. Precision taper cuts as accurate as 1/8 of a degree. Two independent memorylocks keeps angles for repeat taper cuts. Cut up to 8-sided tapered legs together with the grr-ripper 3d pushblock.
Microjig GB-1 Grr-Ripp Block Smart Hook Pushblock w/ GRR-Ripper Deflector/Connector Accessory
- Proprietary green grr-rip for extreme hold. Optional mounts for deflector/connector shield plate for additional protection. Auto-retracting heel technology hooks the tail-end of your board. 90-degree flipguide for vertical footing on bandsaws and router tables. Ergonomic handle exerts directional pressure against the fence.
Scheppach 160 Jig Accessory For Tiger Wet-Grinding Machine
- Accessory for the scheppach tiger wet-grind system. Jig 160 for sharpening straight shears and hedge trimmers.
Leigh Super 24″ Dovetail Jig With Accessory Kit
- The amazing joint making capability of super jigs is due in part to the revolutionary new leigh e-bush. Settings are changed using the included pin wrench and the uniquely shaped locking nut makes tightening the e-bush a snap. Very precise adjustments for fit are made easily with the e-bush. No other jigs equal the versatility and precision of leigh super jigs. The finger assembly can also produce two sizes of box joints, 5/16″ and 5/8″. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, guaranteeing a half pin at each edge of the joint, regardless of board width. The cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template. Super jigs offer extraordinary joint making capability at exceptional price points. Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. Includes 1/2″-8 degree dovetail bit, 1/2″-14 degree dovetail bit, 5/16″ straight bit, 1/2″ to 8mm collet reducer, sliding dovetail fence, half-blind bridge piece material, e-bush, fully illustrated user guide and instructional dvd. A simple twist of the e-bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails. Rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass with the super jigs, you’re not limited to one bit and one depth of cut. Easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non-slip material applied to each clamping surface. Markings clearly indicate the adjustment direction necessary for the desired change. Variably spaced through and half-blind dovetails are standard on all super jigs.
Tormek Sharpening System Magnum Bundle TBM703 T-7. A Complete Water Cooled Sharpener With 16 Popular Jigs and Accessories.
- The magnum bundle includes a wide variety of the tormek line accessories. Htk-706 hand tool kit included. Tnt-708 woodturners kit included. The magnum bundle is a great way to get started as a successful tool sharpener. Bundle includes a tormek t-7 sharpening system.
Microjig Grr-Ripper 3D Pushblock (2-Pack) w/ Microdial Tapering Jig & GRR-Ripper Gravity Heel Accessory Kit (2-Pack)
- The powerful green grr-rip gives you a commanding hold over the work piece for total control. The patented grr-ripper is a 3d pushblock system that offers superior precision, control and safety on your table saw and other major woodworking machinery. Includes • (2) microjig grr-ripper 3d pushblock • microjig tj-5000 microdial tapering jig • (2) microjig grr-ripper gravity heel accessory kit. The grr-ripper comes with a 2-hour advanced techniques dvd featuring over 30 unique uses on the table saw, router table, jointer, and band saws. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock agains the fence, and forward pressure to prevent burning. The grr-ripper has three legs to give you three-directions of control on the keeper and off-cut workpiece.
Leigh Super 18″ Dovetail Jig With Accessory Kit
- Settings are changed using the included pin wrench and the uniquely shaped locking nut makes tightening the e-bush a snap. The amazing joint making capability of super jigs is due in part to the revolutionary new leigh e-bush. Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. Very precise adjustments for fit are made easily with the e-bush. . Markings clearly indicate the adjustment direction necessary for the desired change a simple twist of the e bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non slip material applied to each clamping surface includes 1/2″-8 degree dovetail bit, 1/2″-14 degree dovetail bit, 5/16″ straight bit, 1/2″ to 8mm collet reducer, sliding dovetail fence, half-blind bridge piece material, e-bush, fully illustrated user guide and instructional dvd. Variably spaced through and half-blind dovetails are standard on all super jigs infinitely adjustable one-piece fingers are easily positioned for any joint pattern, guaranteeing a half pin at each edge of the joint, regardless of board width cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass. With the super jigs, you’re not limited to one bit and one depth of cut. Super jigs offer extraordinary joint making capability at exceptional price points. Also includes leigh super jig accessory kit containing vacuum & router support and 7-piece leigh router bit set. The finger assembly can also produce two sizes of box joints, 5/16″ and 5/8″.
Leigh Accessory Kit for Super 18″ Dovetail Jig
- Leigh’s ingenious vrs provides router support and dust-free routing. Leigh super jig accessory kits include a vacuum and router support (vrs) and 7-piece boxed leigh router bit set. The 7-piece set features 8mm shank bits. Includes 1/4″ x 8 degree dovetail 5/16″ x 8 degree dovetail 3/8″ x 8 degree dovetail 7/16″ x 8 degree dovetail 1/2″ x 10 degree dovetail 1/2″ x 12 degree dovetail 1/2″ x 18 degree dovetail.
Microjig GR-100 3D Pushblock with 1/8-Inch Leg Accessory & Gravity Heel Kit
- Patented three drill guide fixed spacing on the drill guide block. Removable drill guide for use with benchtop and portable bases. 1/8-inch incremental settings for materials from 1/2- to 1-1/2-inch thick. Benchtop base features patent pending front clamping design. Made with pride in the usa.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
