20 Top 8 32 Threads

 

Steel Pan Head Machine Screw Yellow Zinc Plated Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 1-34 Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Yellow Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-3/4″ Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Yellow Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-3/4″ Length, Fully Threaded, Import (Pack of 50) - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 T20 Star Drive 8-32 Thread Size 14 Length Fully Threaded Imported Pack of 100

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1/4″ Length, Fully Threaded, Imported (Pack of 100)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1/4″ Length, Fully Threaded, Imported (Pack of 100) - Designed to clip onto panels for quick alignment and a secure hold. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Steel is often used in applications where strength is the primary consideration.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 3-12 Length Fully Threaded Imported Pack of 10

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 3-1/2″ Length, Fully Threaded, Imported (Pack of 10)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 3-1/2″ Length, Fully Threaded, Imported (Pack of 10) - Hex washer head has a flange for additional grip with the mating surface. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Slotted drive has a linear slot for use with a flat-blade driver. Zinc plating resists corrosion and has a reflective appearance.

 

Black Oxide Alloy Steel Hex Socket Head Cap Screw Self Locking 8-32 Thread Size 34 Length Fully Threaded Pack of 25

Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #8-32 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25)

Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #8-32 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25) - Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 1-14 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. .

 

Nylon Wing Nut Off-White Meets UL 94V2 Class 2B 8-32 Threads 0480 Height Pack of 100

Nylon Wing Nut, Off-White, Meets UL 94V2, Class 2B #8-32 Threads, 0.480″ Height (Pack of 100)

Nylon Wing Nut, Off-White, Meets UL 94V2, Class 2B #8-32 Threads, 0.480″ Height (Pack of 100) - The material is a strong yet lightweight plastic and is nonconductive. The off-white nylon wing nut meets underwriters laboratories (ul) 94v2 specifications. Nylon provides resistance to abrasion, corrosion, and many chemicals and solvents. Nylon can either absorb or lose moisture, which may alter its dimensions and mechanical properties. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. The wing nut can be tightened and loosened by hand, without the use of tools. Several different nut styles fit a variety of application and installation requirements. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Slotted Drive Type F 8-32 Thread Size 14 Length Pack of 25

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, #8-32 Thread Size, 1/4″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, #8-32 Thread Size, 1/4″ Length (Pack of 25) - 18-8 stainless steel provides good corrosion resistance and strength. Hex washer head has a flange for additional grip with the mating surface. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Slotted drive has a linear slot for use with a flat-blade driver.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 4 Length Fully Threaded Imported Pack of 10

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 4″ Length, Fully Threaded, Imported (Pack of 10)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 4″ Length, Fully Threaded, Imported (Pack of 10) - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

18-8 Stainless Steel Pan Head Machine Screw Meets ASME B1863 T20 Star Drive 8-32 Thread Size 12 Length Fully Threaded Imported Pack of 50

18-8 Stainless Steel Pan Head Machine Screw, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Imported (Pack of 50)

18-8 Stainless Steel Pan Head Machine Screw, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Imported (Pack of 50) - Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 0276-inches thread length. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Nylon 66 Pan Head Machine Screw Off-White 2 Phillips Drive 8-32 Thread Size 1-14 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1-1/4″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1-1/4″ Length, Fully Threaded, USA Made (Pack of 100) - . Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 T20 Star Drive 8-32 Thread Size 1-12 Length Fully Threaded Imported Pack of 50

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1-1/2″ Length, Fully Threaded, Imported (Pack of 50)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, T20 Star Drive, #8-32 Thread Size, 1-1/2″ Length, Fully Threaded, Imported (Pack of 50) - Round shanks allow use with a wide variety of toolholding systems. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 2-14 Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 2-1/4″ Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 2-1/4″ Length, Fully Threaded, Imported (Pack of 25) - . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

Nylon 66 Machine Screw Plain Finish Black Binding Head Combination Phillips Slotted Drive Meets ASTM D4066ASTM D6779 34 Length Fully Threaded 8-32 Threads Pack of 100

Nylon 6/6 Machine Screw, Plain Finish, Black, Binding Head, Combination Phillips Slotted Drive, Meets ASTM D4066/ASTM D6779, 3/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100)

Nylon 6/6 Machine Screw, Plain Finish, Black, Binding Head, Combination Phillips Slotted Drive, Meets ASTM D4066/ASTM D6779, 3/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100) - Binding head is a slightly undercut, low-profile head with a round top and short vertical sides. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals, is nonconductive, and is a strong yet lightweight plastic. Combination phillips slotted drive accepts both phillips and standard slotted drivers and is designed to prevent over-tightening. Meets astm d4066 and d6779 specifications.

 

Steel Pan Head Machine Screw With Internal-Tooth Lock Washer Black Oxide Finish Meets ASME B1813 2 Phillips Drive 8-32 Thread Size 38 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw With Internal-Tooth Lock Washer, Black Oxide Finish, Meets ASME B18.13, #2 Phillips Drive, #8-32 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw With Internal-Tooth Lock Washer, Black Oxide Finish, Meets ASME B18.13, #2 Phillips Drive, #8-32 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. 0276-inches thread length. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Steel Acorn Nut Black Powder-Coated Finish Right Hand Threads Class 2B 8-32 Threads Pack of 10

Steel Acorn Nut, Black Powder-Coated Finish, Right Hand Threads, Class 2B #8-32 Threads (Pack of 10)

Steel Acorn Nut, Black Powder-Coated Finish, Right Hand Threads, Class 2B #8-32 Threads (Pack of 10) - The acorn nut, also called a cap nut, has a domed top that covers exposed threads on rods, studs, and bolts. Steel is often used in applications where strength is the primary consideration. . Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration. The steel acorn nut has a black powder-coated finish. Several different nut styles fit a variety of application and installation requirements. The black powder coating offers durability. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool.

 

18-8 Stainless Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 58 Length Fully Threaded Imported Pack of 25

18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 25)

18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 25) - Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and a secure hold.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 1-34 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-3/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-3/4″ Length, Fully Threaded, Import (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Plain surface has no. Designed to clip onto panels for quick alignment and a secure hold. Clip is u-shaped for a secure hold on both sides of the panel when screwing down.

 

Steel Machine Screw Zinc Plated Finish Pan Head Phillips Drive Meets ASME B1863SAE J82 14 Length Fully Threaded 8-32 Threads Pack of 100

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3/SAE J82, 1/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3/SAE J82, 1/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Meets asme b1863 and sae j82 specifications. Zinc plating resists corrosion resistance and has a reflective appearance. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 34 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.