SL2-1 2 Morse Taper(hole)-1 Morse Taper(shank) Extension Socket
- Outside (shank) 1 morse taper. Allows the use of a larger morse taper tool. Inside (hole) 2 morse taper. Soft with hardened tang. Overall length 6 1/4″.
Drill America DEWES4-2 Qualtech Extension Socket, #2 Morse Taper Shank, 4-2 Size (Pack of 1)
- . #2 morse taper shank. 4 hole size. Drill america qualtech extension socket.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1)
- 25/32-inches size. 118 degrees conventional point. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
SL2-2 2 Morse Taper(hole)-2 Morse Taper(shank) Extension Socket
- Overall length 6 7/8″. Outside (shank) 2 morse taper. Extends a morse taper tool from the spindle. Soft with hardened tang. Inside (hole) 2 morse taper.
LFA / Reichel Hardware 2MT6 2 Morse Taper by J6 Arbor, Chrome
- Material is high grade steel and 100% hardened for long life. Ground on centers to give the most accuracy between the drill chuck and machine tool. Press fit jacobs taper, to ensure a non slip fit with drill chuck. Morse taper end has tang to prevent slippage. Guaranteed to run true and balanced. Made in france. .
#2 Morse Taper Live Tail Center
- . It’s time to replace your worn out or solid tail center with an affordable live center this value-priced #2 morse taper center has a removable point center and features smooth ball bearings for long life.
LC-P2C 2 Morse Taper – 2.4″ Bull Nose Live Center
- 70 degree nose. Length 539. 2 morse taper shank. Small diameter 047. Large diameter 244″.
No.2 Morse Taper Reamer Set MT2
- No2 morse taper reamers. High carbon steel. Coarse cut reamer and finish cut reamer.
SODIAL(R) 112mm Length MT3 Spindle to MT2 Arbor Morse Taper Adapter for Lathe
- Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1¡À cm. Only authorized seller of sodial can sell under sodial listings. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. Our products will enhance your experience to unparalleled inspiration. . Drill sleeves is used to change the taper of the connective arbors. Sodial is a registered trademark. Sodial(r) 112mm length mt3 spindle to mt2 arbor morse taper adapter for lathemorse taper 3# to morse taper 2#. The morse taper sleeve is mainly used in drilling machine and lathe machine.
Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size (Pack of 1)
- Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Designed to perform in a broad range of materials in the iron and steel families.
Cleveland 2440 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ (Pack of 1)
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. With 30 degree helix. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools.
2 Morse Taper to 3 Jacobs Taper Drill Chuck Arbor
- ). Morse taper to jacobs taper arbors have a tang end (not available with a drawbar end. ) & Chuck (jacobs) taper to order the correct arbor. For chucks with jacobs taper backs. Determine both shank size (to fit into your drill press,tailstock, etc. .
DSH-2-3 2-3 Morse Taper Hard Drill Sleeve
- Outside 3 morse taper. Inside 2 morse taper. Reduces a morse taper hole to a smaller morse taper. Hardened and ground.
2 Morse Taper to 3/8″-24 Threaded Drill Chuck Arbor
- Allows you to use a drill chuck with 3/8″-24 threaded back in morse taper of a drill press, mill, lathe tailstock, etc. .
2 Morse Taper to 6 Jacobs Taper Drill Chuck Arbor
- ). For chucks with jacobs taper backs. Morse taper to jacobs taper arbors have a tang end (not available with a drawbar end. Determine both shank size (to fit into your drill press,tailstock, etc. ) & Chuck (jacobs) taper to order the correct arbor.
Jacobs 7308 AO203 Arbor Adapts No.2 Morse Taper to No.3 Jacobs Taper
- Adapt jacobs taper to morse tapers, straight shanks, threaded shanks and bridgeport tapers. Ideal for use with custom tool and work holder designs and for specialized machining applications. Precision machined and ground to master gages for maximum performance with jacobs drill and tap chucks.
2 Morse Taper to 33 Jacobs Taper Drill Chuck Arbor
- ). Morse taper to jacobs taper arbors have a tang end (not available with a drawbar end. . Determine both shank size (to fit into your drill press,tailstock, etc. For chucks with jacobs taper backs. ) & chuck (jacobs) taper to order the correct arbor.
R8 To 2 Morse Taper Adapter
- 7/16-20 drawbar thread. Inside taper 2 morse taper. R8 tooling for bridgeport and similar vertical milling machines.
#2 Morse Taper Collet 7 Pc . Set 1/8″ – 1/2″ 2MT MT2 3/16 1/4 3/8 Round Chuck
- 3/8″-16 threaded back for drawbar. Made of high grade tool steel and comes new in factory packaging. Hardened and precision ground to close tolerance. 7 pcs #2 morse taper shank collets includes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, & 1/2″. Our part # all-41300.
2 Morse Taper to 2 Jacobs Taper Drill Chuck Arbor
- For chucks with jacobs taper backs. Morse taper to jacobs taper arbors have a tang end (not available with a drawbar end. ). Determine both shank size (to fit into your drill press,tailstock, etc. ) & chuck (jacobs) taper to order the correct arbor.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
