20 Most Wanted Pull Clamps

 

POWERTEC 20304 PushPull Quick-Release Toggle Clamp 300 lbs Capacity 302F

POWERTEC 20304 Push/Pull Quick-Release Toggle Clamp, 300 lbs Capacity, 302F

POWERTEC 20304 Push/Pull Quick-Release Toggle Clamp, 300 lbs Capacity, 302F - A rock-solid grip to install on jigs, tool fixtures, or movable bases. 300 lb holding capacity complete with adjustable 5/16 -18 bolt. Unique push/pull action allows you to hold workpiece in a vertical position. Cold-rolled carbon steel with zinc plated coating for corrosion resistance. Ideal when work piece must be held by horizontal clamping action.

 

Clamp-Rite 12410CR Pull Action Toggle Clamp Vertical Latch Type 700 lb Holding Capacity

Clamp-Rite 12410CR Pull Action Toggle Clamp, Vertical Latch Type, 700 lb Holding Capacity

Clamp-Rite 12410CR Pull Action Toggle Clamp, Vertical Latch Type, 700 lb Holding Capacity - Our products are manufactured to exacting specifications with quality materials and workmanship. These clamps feature high mechanical advantage for greater pulling force. The model 12410cr is a medium duty pull action toggle clamp ideally suited for quick clamping of molds, doors, access covers and lids. Supplied with adjustable u-hook and latch plate. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. Clamp-rite latch type toggle clamps are a toggle clamp variation for applications where a straight pulling action is needed. These versatile clamps are ideal for holding objects together, such as molds, lids and doors. .

 

Clamp-Rite 12810CR Pull Action Toggle Clamp J-Hook Draw Latch Clamp 1000 lb Holding Capacity

Clamp-Rite 12810CR Pull Action Toggle Clamp, J-Hook Draw Latch Clamp, 1000 lb Holding Capacity

Clamp-Rite 12810CR Pull Action Toggle Clamp, J-Hook Draw Latch Clamp, 1000 lb Holding Capacity - The model 12810cr is a robust pull action toggle clamp ideally suited for quick clamping of molds, doors, access covers and lids requiring higher holding forces. Clamp-rite latch type toggle clamps are a toggle clamp variation for applications where a straight pulling action is needed. These clamps feature high mechanical advantage for greater pulling force. Application note the latch point must lie below the centerline of the two pivot points in the clamp to allow proper toggle action. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. The latch point should also be made adjustable for easy set-up. Supplied with adjustable j-hook. Our products are manufactured to exacting specifications with quality materials and workmanship. These versatile clamps are ideal for holding objects together, such as molds, lids and doors.

 

2in1 2 Ton Self-Tightening Long Nose Pull Clamp Grips Single Way

2in1 2 Ton Self-Tightening Long Nose Pull Clamp Grips Single Way

2in1 2 Ton Self-Tightening Long Nose Pull Clamp Grips Single Way - Pulling capacity 2 ton. Single way 2 ton self-tightening long nose pull clamp grips & auto body repair single way pull operation. Self-tightening serrated jaws for a positive grip. Drop forged construction provides more pulling power. Ideal to use in the confined space.

 

TTC Horizontal Toggle Clamp - Model  TGC-901 HANDLE 90176 HOLDING PRESSURE 1500 lbs Style Deluxe Push-Pull Clamp

TTC Horizontal Toggle Clamp – Model .: TGC-901 HANDLE: 90176; HOLDING PRESSURE: 1,500 lbs. Style: Deluxe Push-Pull Clamp

TTC Horizontal Toggle Clamp – Model .: TGC-901 HANDLE: 90176; HOLDING PRESSURE: 1,500 lbs. Style: Deluxe Push-Pull Clamp - Handle 90°. Holding pressure 1,500 lbs.

 

2 Ton Self-Tightening Long Nose Pull Clamp Grips Single Way

2 Ton Self-Tightening Long Nose Pull Clamp Grips Single Way

2 Ton Self-Tightening Long Nose Pull Clamp Grips Single Way - Drop forged construction provides more pulling power. Ideal to use in the confined space. Self-tightening serrated jaws for a positive grip. Single way 2 ton self-tightening long nose pull clamp grips & auto body repair single way pull operation. Pulling capacity 2 ton.

 

Clamp-Rite 12510CR Pull Action Toggle Clamp J-Hook Draw Latch Clamp 375 lb Holding Capacity

Clamp-Rite 12510CR Pull Action Toggle Clamp, J-Hook Draw Latch Clamp, 375 lb Holding Capacity

Clamp-Rite 12510CR Pull Action Toggle Clamp, J-Hook Draw Latch Clamp, 375 lb Holding Capacity - Application note the latch point must lie below the centerline of the two pivot points in the clamp to allow proper toggle action. The latch point should also be made adjustable for easy set-up. These clamps feature high mechanical advantage for greater pulling force. Our products are manufactured to exacting specifications with quality materials and workmanship. These versatile clamps are ideal for holding objects together, such as molds, lids and doors. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. Clamp-rite latch type toggle clamps are a toggle clamp variation for applications where a straight pulling action is needed. . The model 12510cr is a medium duty pull action toggle clamp ideally suited for quick clamping of molds, doors, access covers and lids. Supplied with adjustable j-hook.

 

Clamp-Rite 12710CR Pull Action Toggle Clamp J-Hook Draw Latch Clamp 750 lb Holding Capacity

Clamp-Rite 12710CR Pull Action Toggle Clamp, J-Hook Draw Latch Clamp, 750 lb Holding Capacity

Clamp-Rite 12710CR Pull Action Toggle Clamp, J-Hook Draw Latch Clamp, 750 lb Holding Capacity - Application note the latch point must lie below the centerline of the two pivot points in the clamp to allow proper toggle action. The model 12710cr is a robust pull action toggle clamp ideally suited for quick clamping of molds, doors, access covers and lids requiring higher holding forces. These versatile clamps are ideal for holding objects together, such as molds, lids and doors. Our products are manufactured to exacting specifications with quality materials and workmanship. Clamp-rite latch type toggle clamps are a toggle clamp variation for applications where a straight pulling action is needed. The latch point should also be made adjustable for easy set-up. Supplied with adjustable j-hook. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. These clamps feature high mechanical advantage for greater pulling force.

 

Self-Tightening Pull Clamp Forged Alloy Steel- Auto Body Frame Repair Pulling

Self-Tightening Pull Clamp Forged Alloy Steel- Auto Body Frame Repair Pulling

Self-Tightening Pull Clamp Forged Alloy Steel- Auto Body Frame Repair Pulling - Capacity 5 ton. Pulling eye can be turned to tighten jaws and avoid slipping. Eliminates the need to bolt the clamp to the panel. Jaw width 236″. Forged alloy steel.

 

Clamp-Rite 13070CR Push-Pull Toggle Clamp Flanged Based Imperial Thread 800 lb Holding Capacity

Clamp-Rite 13070CR Push-Pull Toggle Clamp, Flanged Based, Imperial Thread, 800 lb Holding Capacity

Clamp-Rite 13070CR Push-Pull Toggle Clamp, Flanged Based, Imperial Thread, 800 lb Holding Capacity - Clamp-rite push-pull toggle clamps apply clamping force in a straight line. The clamps features a low profile rugged forged steel base. Most models can be locked in either the extended or the retracted position, allowing them to be used in a pushing or pulling manner. . If used in a pulling application, provision must be made to allow adequate clearance for the handle to fully rotate through it’s full range of motion. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. Our products are manufactured to exacting specifications with quality materials and workmanship. Model 13070cr is a medium duty clamp suited for a wide range of applications including checking fixtures and assembly jigs.

 

Pull-It Corp PU4020 4 Piece 4-Way Pull Clamp

Pull-It Corp PU4020 4 Piece 4-Way Pull Clamp

Pull-It Corp PU4020 4 Piece 4-Way Pull Clamp - Includes shackle and oval loop. Clamp has recessed pockets to hold bolts stationary for easy tightening. Piece, 4pc. . Item weight, 11. . . 2 lbs. 4-way pull clamp.

 

Clamp-Rite 13050CR Push-Pull Toggle Clamp Flanged Based Imperial Thread 300 lb Holding Capacity

Clamp-Rite 13050CR Push-Pull Toggle Clamp, Flanged Based, Imperial Thread, 300 lb Holding Capacity

Clamp-Rite 13050CR Push-Pull Toggle Clamp, Flanged Based, Imperial Thread, 300 lb Holding Capacity - Model 13050cr is a medium duty clamp suited for a wide range of applications including checking fixtures and assembly jigs. Clamp-rite push-pull toggle clamps apply clamping force in a straight line. If used in a pulling application, provision must be made to allow adequate clearance for the handle to fully rotate through it’s full range of motion. Our products are manufactured to exacting specifications with quality materials and workmanship. Clamp-rite has decades of experience in the design and manufacture of toggle clamps. Most models can be locked in either the extended or the retracted position, allowing them to be used in a pushing or pulling manner.

 

Clamp-Rite 12440CR Pull Action Toggle Clamp Vertical Latch Type 2000 lb Holding Capacity

Clamp-Rite 12440CR Pull Action Toggle Clamp, Vertical Latch Type, 2000 lb Holding Capacity

Clamp-Rite 12440CR Pull Action Toggle Clamp, Vertical Latch Type, 2000 lb Holding Capacity - Clamp-rite has decades of experience in the design and manufacture of toggle clamps. These clamps feature high mechanical advantage for greater pulling force. These versatile clamps are ideal for holding objects together, such as molds, lids and doors. Supplied with adjustable u-hook and latch plate. Clamp-rite latch type toggle clamps are a toggle clamp variation for applications where a straight pulling action is needed. Our products are manufactured to exacting specifications with quality materials and workmanship. The model 12440cr is a medium duty pull action toggle clamp ideally suited for quick clamping of molds, doors, access covers and lids.

 

3 Ton Capacity Pull Clamp - Auto body Frame Repair

3 Ton Capacity Pull Clamp – Auto body Frame Repair

3 Ton Capacity Pull Clamp – Auto body Frame Repair - Making it an unique two clamp jaw sizes in one clamp design. The pull ring can be installed from both directions, depending on the work area. .

 

G Pull Clamp Yoke 4 ton

G Pull Clamp & Yoke 4 ton

G Pull Clamp & Yoke 4 ton - Please leave feed back as we value all our customers’ comments. 4 ton pull capacity. Throat opening gives greater access to get around and behind the damage.

 

JW Winco 36010 Steel Push-Pull Toggle Clamp with Horizontal Mounting Base 1-58 Plunger Travel 800-Pound Holding Capacity

JW Winco 36010 Steel Push-Pull Toggle Clamp with Horizontal Mounting Base, 1-5/8″ Plunger Travel, 800-Pound Holding Capacity

JW Winco 36010 Steel Push-Pull Toggle Clamp with Horizontal Mounting Base, 1-5/8″ Plunger Travel, 800-Pound Holding Capacity - Ground and oiled plunger shaft. More economical longer stroke push-pull clamp. Red vinyl hand grip. 3/8-16 hex head zinc plated steel spindle assembly included. Heavy gage sheet metal steel, zinc plated.

 

Clamp-Rite 13010CR Push-Pull Toggle Clamp 100 lb Holding Capacity

Clamp-Rite 13010CR Push-Pull Toggle Clamp, 100 lb Holding Capacity

Clamp-Rite 13010CR Push-Pull Toggle Clamp, 100 lb Holding Capacity - Clamp-rite push-pull toggle clamps apply clamping force in a straight line. Most models can be locked in either the extended or the retracted position, allowing them to be used in a pushing or pulling manner. If used in a pulling application, provision must be made to allow adequate clearance for the handle to fully rotate through it’s full range of motion. It is ideal for light duty delicate applications that do not require high forces clamping forces. The model 13010cr is the smallest clamp in this family. Our products are manufactured to exacting specifications with quality materials and workmanship. Clamp-rite has decades of experience in the design and manufacture of toggle clamps.

 

DE-STA-CO 323 Pull Action Latch Clamp with Threaded U-Bolt

DE-STA-CO 323 Pull Action Latch Clamp with Threaded U-Bolt

DE-STA-CO 323 Pull Action Latch Clamp with Threaded U-Bolt - 49″. The threaded u-bolts permit easy adjustment and provide a positive connection with the supplied latch plate and have a range of adjustment of 0. The over-center toggle action of these clamps suits them ideally for holding against heavy forces such as those generated in plastic molding operations. These models are ideal for quick clamping of the doors, lids, or access covers onto drums, containers, or other vessels. All models supplied with ergonomic handle grip.

 

4-Way Pull Clamp-2Pack

4-Way Pull Clamp-2Pack

4-Way Pull Clamp-2Pack - Package quantity 4. 4-way pull clamp-2pack. Item weight, 112 lbs. Includes shackle and oval loop. Clamp has recessed pockets to hold bolts stationary for easy tightening.

 

TTC Horizontal Toggle Clamp - Model  TGC-800 HANDLE 45176 HOLDING PRESSURE 800 lbs Style Deluxe Push-Pull Clamp

TTC Horizontal Toggle Clamp – Model .: TGC-800 HANDLE: 45176; HOLDING PRESSURE: 800 lbs. Style: Deluxe Push-Pull Clamp

TTC Horizontal Toggle Clamp – Model .: TGC-800 HANDLE: 45176; HOLDING PRESSURE: 800 lbs. Style: Deluxe Push-Pull Clamp - Handle 45°. Holding pressure 800 lbs.