20 Coolest Jobber Drill Bit Sets

 

YG-1 DLGPSET932 47 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set TiN Finish Straight Shank Parabolic Spiral Flute 130 Degree Set of 47

YG-1 DLGPSET932 47 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Parabolic Spiral Flute, 130 Degree (Set of 47)

YG-1 DLGPSET932 47 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Parabolic Spiral Flute, 130 Degree (Set of 47) - Set includes 1 each of #1, #2, #3, #4, #5, #6, #7, #8, #9, #10, #11, #12, #13, #14, #15, #16, #17, #18, #19, #20, #21, #22, #23, #24, #25, #26, #27, #28, #29, #30, #31, #32, #33, #34, #35 size drill bits. Bright body tin coating on working part. Applicable for improved chip removal in most materials, especially in deep drilling applications. Also includes #36, #37, #38, #39, #40, #41, #42, #43, #44, #45, #46, #47 size drill bits. Ansi specifications met.

 

Drillco 200LH Series 15 Piece High-Speed Steel Left Hand Jobber Drill Bit Set Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point 116 - 12 in 132 increments

Drillco 200LH Series 15 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/32″ increments

Drillco 200LH Series 15 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/32″ increments - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 15 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/32″ increments. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point Drill Pal 116 - 12 in 164 increments

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments - 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Drillco 400 Series 13 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 14 in 164 increments

Drillco 400 Series 13 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments

Drillco 400 Series 13 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments - 13 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

Drillco 400N Series Nitro 13 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 14 in 164 increments

Drillco 400N Series Nitro 13 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments

Drillco 400N Series Nitro 13 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 13 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools.

 

Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 116-12 x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point Water Resistant Index-MADE IN USA

Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 1/16″-1/2″ x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point, Water Resistant Index-MADE IN USA

Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 1/16″-1/2″ x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point, Water Resistant Index-MADE IN USA - Drill 3x longer (than competitors drills), drill 2x faster (than cobalt), drill accurate (135 deg split point, tapered web geometry). Premium high speed steel and nomo surface treatment for longer tool life, fast penetration, and flexibility. Better than cobalt-xl5 is able to flex when cobalt drills chip or snap. Self centering 135 degree split point prevents drill from walking. Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials.

 

Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case 1-60 Size A-Z and 116-12 x 64ths 115 Piece

Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case, #1-60 Size, A-Z and 1/16-1/2 x 64ths, 115 Piece

Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case, #1-60 Size, A-Z and 1/16-1/2 x 64ths, 115 Piece - . #1-60, a-z & 1/16-1/2 x 64ths 115 piece kfd black & gold hss split point jobber drill bit set in metal case.

 

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 14 in 164 increments 932 - 12 in 132 increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments & 9/32″ – 1/2″ in 1/32″ increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments & 9/32″ – 1/2″ in 1/32″ increments - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 21 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments and from 9/32″ to 1/2″ in 1/32″ increments. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Drillco 400N Series Nitro 60 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point Size 1 - 60

Drillco 400N Series Nitro 60 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Size #1 – #60

Drillco 400N Series Nitro 60 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Size #1 – #60 - 60 jobber length drill bits ranging in size from #1 to #60. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Champion TWISTER-US5-29 Contractor Series HSS GP Jobber Drill Bit Set-118 Deg Black Oxide Treated 29 Piece

Champion TWISTER-US5-29 Contractor Series HSS GP Jobber Drill Bit Set-118 Deg. Black Oxide Treated 29 Piece

Champion TWISTER-US5-29 Contractor Series HSS GP Jobber Drill Bit Set-118 Deg. Black Oxide Treated 29 Piece - Fits portable drilling machines. Application includes general contractor use, home owner. Cuts low & medium carbon steels, cast iron and wood.

 

Drillco 400N Series Nitro 15 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 12 in 132 increments

Drillco 400N Series Nitro 15 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/32″ increments

Drillco 400N Series Nitro 15 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/32″ increments - Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. 15 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/32″ increments. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 38 in 164 increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments - 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Drillco 500 Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set Bronze Finish Round Shank Spiral Flute 135 Degrees Split Point Drill Pal 116 - 12 in 164 increments

Drillco 500 Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments

Drillco 500 Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments - High red hardness of cobalt permits speeds 30 percent greater than hss drills. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Round shanks allow use with a wide variety of toolholding systems.

 

Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set 13 Piece

Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (13 Piece)

Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (13 Piece) - Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. 135-degree split point for accurate centering and fast penetration. Nas 907b heavy duty jobber. Special hi-molybdenum tool steel/gold oxide. 13 pc set premium metric jobber 135-degree split point nas 907b.

 

Drillco 200B Series 29 Piece High-Speed Steel Jobber Drill Bit Set Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point 116 - 12 in 164 increments

Drillco 200B Series 29 Piece High-Speed Steel Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/64″ increments

Drillco 200B Series 29 Piece High-Speed Steel Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/64″ increments - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 piece jobber drill set.

 

Jobber Drill Bit Set List  150ASP 20 Pc

Jobber Drill Bit Set, List # 150ASP, 20 Pc

Jobber Drill Bit Set, List # 150ASP, 20 Pc - ) 135 wire size #61 to #80 sizes included #61, #80. Chicago-latrobe 45656 jobber length drill bit set standard list number 150asp number of pieces 20 heavy duty grade high speed steel black oxide finish p3 split point drill point (deg.

 

Drillco 200LH Series 13 Piece High-Speed Steel Left Hand Jobber Drill Bit Set Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point 116 - 14 in 164 increments

Drillco 200LH Series 13 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/4″ in 1/64″ increments

Drillco 200LH Series 13 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/4″ in 1/64″ increments - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 13 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Precision Twist C252ABSET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 10 mm - 130 mm x 05 mm Steam Oxide Finish

Precision Twist C252ABSET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 1.0 mm – 13.0 mm x 0.5 mm, Steam Oxide Finish

Precision Twist C252ABSET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 1.0 mm – 13.0 mm x 0.5 mm, Steam Oxide Finish - 118 degree point high speed steel drill. 25 piece metric high speed steel drill set with the size range from 10mm, 130mm x 5mm, steam oxide finish in a metal index. Steam oxide coated for increased wear resistance and lubricity.

 

YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set TiN Finish Straight Shank Slow Spiral 135 Degree Set of 56 by YG-1

YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Slow Spiral, 135 Degree (Set of 56) by YG-1

YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Slow Spiral, 135 Degree (Set of 56) by YG-1 - Set includes 1 each of #1, #2, #3, #4, #5, #6, #7, #8, #9, #10, #11, #12, #13, #14, #15, #16, #17, #18, #19, #20, #21, #22, #23, #24, #25, #26, #27, #28, #29, #30, #31, #32, #33, #34, #35 drill bitsalso includes #36, #37, #38, #39, #40, #41, #42, #43, #44, #45, #46, #47, #48, #49, #50, #51, #52, #53, #54, #55, #56 drill bitsbright body tin coating on working partapplicable for drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite, malleable cast ironansi specifications met.

 

Drillco 500E Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set Bronze Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 12 in 164 increments

Drillco 500E Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments

Drillco 500E Series 29 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increment. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Round shanks allow use with a wide variety of toolholding systems. High red hardness of cobalt permits speeds 30 percent greater than hss drills.