19 Most Wanted Raised Panel Cutters

 

Freud RP-E34 34-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-E34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-E34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - C3 micro-grain tungsten carbide cutters. 3-1/2″ raised panel cutter with a 1/2″ shank. Two flute carbide design. Ogee with a step cove profile. Covered by freud’s limited lifetime warranty.

 

Freud UC-215 Quadra-Cut Raised Panel Cutter for 34-Inch Stock

Freud UC-215 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock

Freud UC-215 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock - 4-15/16″ diameter. The small cutter, with opposite shear angle, will push wood fibers down and shear them off leaving a crisp edge at the top of the panel. 5/8″ height and 15/64″ minor height. 10 degree angle with 3/4″ bore.

 

Infinity Tools 83-004 Cove Raised Panel Shaper Cutter 34 Bore

Infinity Tools 83-004, Cove Raised Panel Shaper Cutter, 3/4″ Bore

Infinity Tools 83-004, Cove Raised Panel Shaper Cutter, 3/4″ Bore - Cove profile. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Precision machined from fatigue-proof steel for extra strength. 3-wing micro-grain carbide tips for a long life and repeated sharpening. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width.

 

TREND IT7510081 RAISED PANEL CUTTER 180X25X30 by Trend

TREND IT/7510081 RAISED PANEL CUTTER 180X25X30 by Trend

TREND IT/7510081 RAISED PANEL CUTTER 180X25X30 by Trend - Trend it/7510081 raised panel cutter 180x25x30. C3 micro-grain tungsten carbide cutters. Two flute carbide design. Ogee with a step cove profile. Covered by freud’s limited lifetime warranty.

 

Freud UC-211 22 Raised Panel Shaper Cutter For 34-Inch Stock - 34 Bore

Freud UC-211 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore

Freud UC-211 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore - Kickback reducing design. Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips.

 

Bosch 85640M Ogee Raised Panel Cutter 3-12-Inch Diameter 58-Inch Cut 12-Inch Shank Router Bit

Bosch 85640M Ogee Raised Panel Cutter 3-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit

Bosch 85640M Ogee Raised Panel Cutter 3-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit - The fully hardened and tempered steel shank provides ultimate durability. This bit is used for making an attractive ogee design in raised panel doors and paneling. . Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention.

 

Freud UC-213 22 Raised Panel Shaper Cutter For 34-Inch Stock - 34 Bore

Freud UC-213 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore

Freud UC-213 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore - Overall diameter (d) carbide height (h) minor height (m) large radius (r1) small radius (r2) angle (a) bore diameter 4-15/16 11/16 21/64 1-31/32 1-3/8 23degree 3/4.

 

Freud UP230 Radius Back Cutter For 58-Inch Stock 1-14 Bore Freud Raised Panel Cutters Style Radius Back Cutter For 58-Inch Stock 1-14 Bore Freud Raised Panel Cutters Model UP230

Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Style: Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Model: UP230

Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Style: Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Model: UP230 - Stock. Freuds back-cutters are designed to be used with raised panel cutters when cutting 3/4 in. These cutters leave a decorative profile on the back side of the panel making the panel flush with both the front and back of the rails and stiles. Bore cutters with panel cutters uc200 through u208. Bore cutters with panel cutters up200 through up208. Use the 1-1/4 in. Use 3/4 in.

 

Freud RP-B34 34-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-B34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-B34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Ogee with a step cove profile. Two flute carbide design. C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty.

 

Infinity Tools 83-005 15° Shaker Raised Panel Shaper Cutter 34 Bore

Infinity Tools 83-005, 15° Shaker Raised Panel Shaper Cutter, 3/4″ Bore

Infinity Tools 83-005, 15° Shaker Raised Panel Shaper Cutter, 3/4″ Bore - 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Shaker profile. 3-wing micro-grain carbide tips for a long life and repeated sharpening. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Precision machined from fatigue-proof steel for extra strength.

 

Sommerfelds Shaker Raised Panel Cutter wBack-Cutter

Sommerfeld’s Shaker Raised Panel Cutter w/Back-Cutter

Sommerfeld’s Shaker Raised Panel Cutter w/Back-Cutter - If you want a raised panel, our raised panel cutter also creates the same 22-1/2 straight bevel. The panel cutter is also preset to make a 7/32″ groove in the stile and rails. The panel cutter can also be shimmed to increase the size of the panel to standard 1/4″ to use with your standard stile and rail cutters. Shank diameter 1/2″. Cutting diameter 3-1/2″. Overall length 3-3/64″.

 

Freud UC-209 22 Raised Panel Shaper Cutter For 34-Inch Stock - 34 Bore

Freud UC-209 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore

Freud UC-209 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore - Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips. Kickback reducing design.

 

Freud RP-C34 34-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-C34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-C34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty. Two flute carbide design. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty.

 

Freud UC-202 Bevel Raised Panel Shaper Cutter For 58-Inch Stock - 34 Bore

Freud UC-202 Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock – 3/4 Bore

Freud UC-202 Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock – 3/4 Bore - Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips. Kickback reducing design.

 

Art Deco Raised Panel Shaper Cutter 34 Bore 4-58 CD

Art Deco Raised Panel Shaper Cutter 3/4″ Bore 4-5/8″ C.D

Art Deco Raised Panel Shaper Cutter 3/4″ Bore 4-5/8″ C.D - 3-wing micro-grain carbide tips for a long life and repeated sharpening. Art deco profile. Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width.

 

Freud UP231 Bevel Back Cutter For 58-Inch Stock 1-14 Bore Freud Raised Panel Cutters Style Bevel Back Cutter For 58-Inch Stock 1-14 Bore Freud Raised Panel Cutters Model UP231

Freud UP231 Bevel Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Style: Bevel Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Model: UP231

Freud UP231 Bevel Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Style: Bevel Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters Model: UP231 - Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips. Kickback reducing design.

 

Freud UP230 Radius Back Cutter For 58-Inch Stock 1-14 Bore Freud Raised Panel Cutters

Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters

Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters - Kickback reducing design. Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty.

 

Bosch 85641M Router Bit Carbide Tip 3-12 Cove Raised Panel Cutter

Bosch 85641M Router Bit Carbide Tip 3-1/2 Cove Raised Panel Cutter

Bosch 85641M Router Bit Carbide Tip 3-1/2 Cove Raised Panel Cutter - Overall diameter 3-3/8″overall length 2-7/8″cutting edge length 1/2″shank 1/2″bearing diameter 1/2″cutting width 1-7/16″radius 1-9/16″this bit is used for making an attractive cove design in raised panel doors and panelingused to create clean simple lines to accentuate a surfaceminimum recommended panel thickness is 3/4″micrograin carbide tips provide superior wear resistance and long liferecommended for use with a router tablecompact ball-bearing pilot guides bit along edge of material.

 

Freud RP-E 58-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-E 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-E 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty.