Freud FC-107 7-Piece Carbide Forstner Drill Bit Set Style: 7-Piece Carbide Forstner Drill Bit Set Model: FC-107
- Comes in a sturdy wooden case for protection. These carbide forstner bits bring a technical level of excellence not found in a standard high speed steel forstner bit. Use in hand held drills and drill presses. The bits have a center spur that allows you to accurately locate the center of your hole. Best of all, these bits will not burn like a standard forstner and will stay sharp many times longer. These bits will drill through a multitude of materials. Sizes are 1/4, 3/8, 1/2, 5/8, 3/4, 1, and 1-3/8. Use to drill pocket holes, angled holes, overlapping holes, and flat bottom holes.
Freud FC-005 3/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 3/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-005
- Freud’s carbide forstner bits drill clean holes in wood and most wood products. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes.
Freud FC-008 1-1/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-1/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-008
- . Freud’s carbide forstner bits drill clean holes in wood and most wood products. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes.
Freud FC-015 2-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 2-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-015
- The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Freud’s carbide forstner bits drill clean holes in wood and most wood products. Use for drilling flat bottom holes, pocket holes or overlapping holes.
Freud FC-003-1/2-Inch by 5/16-Inch Shank Carbide Forstner Drill Bit by Freud
- Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty. Drill straight, angled and overlapping holes. Freud fc-003-1/2-inch by 5/16-inch shank carbide forstner drill bit. Right hand rotation.
Freud FC-009 1-1/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-1/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-009
- The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes. Freud’s carbide forstner bits drill clean holes in wood and most wood products.
Freud FC-003-1/2-Inch by 5/16-Inch Shank Carbide Forstner Drill Bit Style: 1/2-Inch by 5/16-Inch Shank Carbide Forstner Drill Bit Model: FC-003
- Use for drilling flat bottom holes, pocket holes or overlapping holes. Freud’s carbide forstner bits drill clean holes in wood and most wood products. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole.
Freud FC-014 1-7/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-7/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit, Model: FC-014, Tools & Outdoor Store
- Use for drilling flat bottom holes, pocket holes or overlapping holes. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Freud’s carbide forstner bits drill clean holes in wood and most wood products. .
Freud FC-010 1-3/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-3/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-010
- The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes. Freud’s carbide forstner bits drill clean holes in wood and most wood products.
Freud FC-007 1-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit
- Use for drilling flat bottom holes, pocket holes or overlapping holes. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Freud’s carbide forstner bits drill clean holes in wood and most wood products.
Freud FC-016 2-1/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 2-1/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-016
- Freud’s carbide forstner bits drill clean holes in wood and most wood products. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes.
Freud FC-001-1/4-Inch by 5/32-Inch Shank Carbide Forstner Drill Bit Style: 1/4-Inch by 5/32-Inch Shank Carbide Forstner Drill Bit Model: FC-001
- The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Freud’s carbide forstner bits drill clean holes in wood and most wood products. Use for drilling flat bottom holes, pocket holes or overlapping holes.
Freud FC-007 1-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-007
- . Use for drilling flat bottom holes, pocket holes or overlapping holes. Freud’s carbide forstner bits drill clean holes in wood and most wood products. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole.
Freud FC-013 1-3/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-3/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-013
- Use for drilling flat bottom holes, pocket holes or overlapping holes. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. . Freud’s carbide forstner bits drill clean holes in wood and most wood products.
Freud FC-005 3/4-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit by Freud
- Micro-grain carbide/titanium tips ensure cleaner cuts and long lasting sharpness. Wood case for easy storage and protection. Freud fc-005 3/4-inch by 3/8-inch shank carbide forstner drill bit. Center locating spur. 1-year limited manufacturer’s warranty.
Freud FC-011 1-1/2-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Style: 1-1/2-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit Model: FC-011
- The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole. Use for drilling flat bottom holes, pocket holes or overlapping holes. Freud’s carbide forstner bits drill clean holes in wood and most wood products.
Freud FC-004 5/8-Inch by 5/16-Inch Shank Carbide Forstner Drill Bit Style: 5/8-Inch by 5/16-Inch Shank Carbide Forstner Drill Bit Model: FC-004
- Freud’s carbide forstner bits drill clean holes in wood and most wood products. . Use for drilling flat bottom holes, pocket holes or overlapping holes. The micrograin carbide tips stay sharp many times longer than standard high speed steel and the sharp center spur accurately locates the center of your hole.
Shop-Tek 80721 1-3/8-Inch (35mm) by 3/8-Inch Shank CARBIDE Forstner Drill Bit, High Speed Steel
- Designed to cut holes in wood and plywood. Shank recduced to 3/8-inch shank. Drill flat bottomed holes without splintering. Carbide for longest life. Precision machined for best results.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
