18 Most Wanted Chucks

 

South Bend Lathe SB1370 12-Inch by JT33 Drill Chuck

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck - Durable finish gives years of life to the surfaces. Produced to close tolerances. Accurate enough for your lathe or mill.

 

4-Way Chuck Key for Drills Drill Presses 38 12 1 2 3 4

4-Way Chuck Key for Drills Drill Presses 3/8″ & 1/2″ #1 #2 #3 #4

4-Way Chuck Key for Drills Drill Presses 3/8″ & 1/2″ #1 #2 #3 #4 - Easily change from fastening to drilling with 1/4-inch hex quick connect. Essential power tool accessory for hand-held power & cordless drills, drill presses. A great accessory for all your drilling tasks. Comes with dewalt 90 day warranty and 1 year free service contract. Constructed with all metal for supreme durability.

 

NOVA ILNS 1-14-Inch 8TPI Thread Chuck InsertAdaptor

NOVA ILNS 1-1/4-Inch 8TPI Thread Chuck Insert/Adaptor

NOVA ILNS 1-1/4-Inch 8TPI Thread Chuck Insert/Adaptor - The insert has different lathe spindle thread sizes internally, and simply screws into the back of your nova chucks. . Once the insert is in place, you can then put your chuck onto your lathe. Teknatool uses an easy and inexpensive insert/adaptor system on all its nova chucks (apart from the compac).

 

NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck - Auto stop so jaws don’t protrude past chuck body. Fits full range of nova chuck accessories. Woodworm screw for fast mounting of rough timbers. Special wood turning profile on jaws to cut into and grip wood fibers firmly. Fast easy two lever operation.

 

NOVA 6026 Mini Spigot Chuck Accessory Jaw Set

NOVA 6026 Mini Spigot Chuck Accessory Jaw Set

NOVA 6026 Mini Spigot Chuck Accessory Jaw Set - Long nose jaws allow for a very powerful spigot grip for smaller work. Same jaw fixing system across all nova chuck models, total system interchangeability. All nova chuck accessory jaws are designed to hold in the expansion and contraction modes. Special nova dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. 2-year warranty.

 

NOVA JSPIN Pin Chuck Accessory Jaw Set

NOVA JSPIN Pin Chuck Accessory Jaw Set

NOVA JSPIN Pin Chuck Accessory Jaw Set - All nova chuck accessory jaws are designed to hold in the expansion and contraction modes. Same jaw fixing system across all nova chuck models, total system interchangeability. Acts like a pin chuck, expanding into a pre-bored hole perfect for free form edge bowls. Longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins. Special nova dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers.

 

SE 848CS 4-Way Chuck Key

SE 848CS 4-Way Chuck Key

SE 848CS 4-Way Chuck Key - Our 4-in-1 chuck key tool has 4 key sizes for tightening, loosening and securing a variety of chuck sizes. Se 4-way chuck key tool is an essential power tool accessory for hand-held power & cordless drills, drill presses and more. 4-way chuck key has 4 key sizes for various size chucks one tool with 4 key sizes for tightening and loosening chuck this 4-way universal chuck can perfect replacement for lost or damaged chuck keys 4-way chuck key sizes include 1/2″, 9/16″, 5/8″, 11/16″ se is committed to providing the customer with the best possible source for value. Genuine se products come with our se logo on the packaging. Se is a registered trademark protected by us trademark law. Why carry different chuck keys for different tools when you can use our 4-in-1 chuck key to tighten various sized chucks feel safe and secure knowing your chuck is tight or easily loosen to change drill bits. You will enjoy the quality, function and usefulness our 4-way chuck key 1/2″ 9/16″ 5/8″ & 11/16″ has to offer. Our chuck key is commonly used for power drills, flexible shaft grinders, and other power tools. . Important avoid getting counterfeit items.

 

14 Inch Hex Shank Keyless Drill Chuck Quick Change Adapter Converter 03-65MM Black

1/4 Inch Hex Shank Keyless Drill Chuck Quick Change Adapter Converter 0.3-6.5MM (Black)

1/4 Inch Hex Shank Keyless Drill Chuck Quick Change Adapter Converter 0.3-6.5MM (Black) - Unlimited use in automotives, garages, warehouses, offices, homes etc. Instantly convert impact driver to hold non-quick change drill & driver bits. Quickly convert your quick change hex shank driver into a drill. Connecting link 635mm(1/4 “) hex shank. Clamping range 03-65mm.

 

Campbell Hausfeld Tire Inflator 3-in-1 Inflation Gun Locking Chuck and 2-inch Gauge ¼ NPT and Flexible Hose MP600000AV

Campbell Hausfeld Tire Inflator, 3-in-1 Inflation Gun, Locking Chuck and 2-inch Gauge, ¼” NPT and Flexible Hose (MP600000AV)

Campbell Hausfeld Tire Inflator, 3-in-1 Inflation Gun, Locking Chuck and 2-inch Gauge, ¼” NPT and Flexible Hose (MP600000AV) - Campbell hausfeld, the air power expert. Easy to control with a large, readable gauge-2″ in diameter–that measures between 10, 150 psi the inflation gun features a side relief valve for bleeding off air and reducing pressure in over-inflated tires, helping you achieve proper inflation. Simply squeeze the clip and position the chuck over any schrader-type tire valve release the clip to lock the hands-free chuck into place squeeze the trigger on the inflation gun to inflate. The flexible hose helps you maneuver move easily into heel wells and other tight spaces. Easy to use when connected to your air compressor, the mp600000av combines 3 tools in one compact design-an inflation gun, chuck and gauge.

 

Jacobs Chuck 30354 38-Inch Keyless Chuck for 38-Inch 24 Thread Spindle

Jacobs Chuck 30354 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle

Jacobs Chuck 30354 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle - . 3/8″, 10mm capacity, professional keyless chuck, new ratcheting action, chuck clicks when the drill bit is tight, reduces bit slippage, can be used on hammer drills, 3/8, 24 mount.

 

Bosch 1618571014 SDS-plus Shank 3 Jaw Chuck with Integral

Bosch 1618571014 SDS-plus Shank 3 Jaw Chuck with Integral

Bosch 1618571014 SDS-plus Shank 3 Jaw Chuck with Integral - Use for straight shank drilll bits. Service part. 1/2″ capacity chuck with integral sds-plus shank.

 

132- 58 Heavy Duty Drill Chuck with Chuck Key and MT2 Arbor

1/32″- 5/8″ Heavy Duty Drill Chuck with Chuck Key and MT2 Arbor

1/32″- 5/8″ Heavy Duty Drill Chuck with Chuck Key and MT2 Arbor - Suitable for drill presses or lathes spindle accepts mt2 shank jaws are specially engineered to achieve balance. Jt33 mounted. Heavy duty design. Special quenching treated key parts increases durability. Chuck key and mt2-jt33 arbor are also included in the package.

 

Performance Tool W10057 4 Air Hose with Tire Chuck

Performance Tool W10057 4′ Air Hose with Tire Chuck

Performance Tool W10057 4′ Air Hose with Tire Chuck - 1/4″ female npt tire chuck. Performance tool 4′ air hose with tire chuck part number w10057.

 

Neiko 20754A 38 Drill Chuck with 14 Quick Change Hex Shank  Convert Impact Driver and Wrench to Drill

Neiko 20754A 3/8″ Drill Chuck with 1/4″ Quick Change Hex Shank | Convert Impact Driver and Wrench to Drill

Neiko 20754A 3/8″ Drill Chuck with 1/4″ Quick Change Hex Shank | Convert Impact Driver and Wrench to Drill - Constructed from premium chrome vanadium steel for durability and stands up to extensive daily use. This complete power tool conversion kit includes keyed 3/8″ drill chuck, a chuck key and a 1/2″ dr x 1/4″ hex adaptor. Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16″ to 3/8″ shank. Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function. With included 1/2″ drive by 1/4″ hex adapter, can easily transform power impact wrench to a drill.

 

NOVA 48232 G3 Reversible Wood Turning Chuck

NOVA 48232 G3 Reversible Wood Turning Chuck

NOVA 48232 G3 Reversible Wood Turning Chuck - Open back for easy cleaning. Fast comfortable t bar handle. Anti-release spindle lock, ensures chuck will stay securely mounted on the nova 46000 comet ii midi lathe during forward and reverse turning. High powered tuff lock gearing delivers outstanding grip for little effort. Fits full range of nova chuck accessories.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch. Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles.

 

12-20 UNF Mount 15-13mm Capacity Key Drill Chuck w SDS Plus Shank

1/2″-20 UNF Mount 1.5-13mm Capacity Key Drill Chuck w SDS Plus Shank

1/2″-20 UNF Mount 1.5-13mm Capacity Key Drill Chuck w SDS Plus Shank - Mount 1/2″-20 unfchuck size(approx) 59 x 4cm/23″ x 16″ (ld). Color black, silver tonematerial metal. Sds plus shank size 64 x 125 x 17mm/25″ x 05″ x 07″ (lthread dia maxd)key size 8 x 4 x 17cm / 31″ x 16″ x 07″(lwh). Net weight 343gpackage content 1 x drill chuck,1 x sds plus shank,1 x key. Product name key type drill chuckcapacity 15-13mm.

 

Tru-Flate 17-351 14 Female NPT Direct Air Line Chuck With Shut-off

Tru-Flate 17-351 1/4″ Female NPT Direct Air Line Chuck With Shut-off

Tru-Flate 17-351 1/4″ Female NPT Direct Air Line Chuck With Shut-off - The tru-flate 17-351 air chuck is a standard brass ball foot chuck that attaches to air lines for general air filling applications. This air chuck is suitable for a wide range of general commercial and industrial air filling applications. Plews & edelmann manufactures automotive and pneumatic hose, lines, reels, accessories, fittings, and lubricants under the edelmann, amflo, omega, lubrimatic, and ultralube brands. It is a direct air line, or closed chuck type, which means that it comes equipped with a built-in shutoff valve and is not suitable for use with inflator or pressure gauges. It has a maximum pressure rating of 150 pounds per square inch (psi), and a 1/4″ female national pipe thread taper (npt) connection. The company, founded in 1909, is headquartered in dixon, il.