17 Best and Coolest Wood Working Tools

 

Woodpeckers Precision Woodworking Tools WPDPPACK1 Drill Press Table 1-Pack

Woodpeckers Precision Woodworking Tools WPDPPACK1 Drill Press Table, 1-Pack

Woodpeckers Precision Woodworking Tools WPDPPACK1 Drill Press Table, 1-Pack - 16-inch by 23-inch by 1-inch surface with mdf core. Designed for 12″ and larger drill presses. Microdot laminate to better “grip” the work piece under pressure. Laser engraved fence face with a center scale (zero in the center). Two double-wide t-tracks are embedded and bolted in place from underneath.

 

Woodpeckers Precision Woodworking Tools SF-36SINGLE Single Offset Super Fence 36-Inch

Woodpeckers Precision Woodworking Tools SF-36SINGLE Single Offset Super Fence, 36-Inch

Woodpeckers Precision Woodworking Tools SF-36SINGLE Single Offset Super Fence, 36-Inch - Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose. The two fence halves automatically line up perfectly parallel when tightened down. Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge. Variable throat capabilities to handle router bits up to 4-inches in diameter. Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch.

 

Woodpeckers Precision Woodworking Tools WWR36 Woodworking Rule 36-Inch

Woodpeckers Precision Woodworking Tools WWR36 Woodworking Rule, 36-Inch

Woodpeckers Precision Woodworking Tools WWR36 Woodworking Rule, 36-Inch - Finger groove down center to help position the rule into place. Precise laser engraved markings, 1/16-inch graduations. Sits flat because of a recess down center of bottom surface. Blade machined from aircraft-grade aluminum and anodized for surface protection and appearance. Markings engraved on a 30 degree bevel for easy alignment to pencil marks.

 

Zscoo 4-sided Tungsten Carbide Indexable Replacement Inserts Accessory for Carpenter Woodworking Tool 14-14-2mm 10 Unit Per Pack

Zscoo 4-sided Tungsten Carbide Indexable Replacement Inserts Accessory for Carpenter Woodworking Tool (14-14-2mm, 10 Unit Per Pack)

Zscoo 4-sided Tungsten Carbide Indexable Replacement Inserts Accessory for Carpenter Woodworking Tool (14-14-2mm, 10 Unit Per Pack) - 90 degree carbide square cutter, corners are very sharp with no radius, best choice for turning perfect 90 degree shapes such as inside corners and tenons. Cutter rotates give you four fresh edges for maximum life, for spiral/helical planer cutter head. Excellent accessory for wood turning work and etcperfect for beginners or even experienced wood workers. Made of tungsten carbide and sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use. Ideal for giving you a smooth finish on straight rough pieces as big or small turning projects.

 

Woodpeckers Precision Woodworking Tools PTR46SET Precision Triangle Set 4-Inch6-Inch

Woodpeckers Precision Woodworking Tools PTR46SET Precision Triangle Set, 4-Inch/6-Inch

Woodpeckers Precision Woodworking Tools PTR46SET Precision Triangle Set, 4-Inch/6-Inch - Right angle legs are standard scales, 1/16-inch scale graduations. Set includes a 4-inch and 6-inch triangle. Machined from 1/4-inch thick aluminum tooling plate buffed to a satin finish and anodized for durability. Each triangle features engraved inch scale markings on all three legs.

 

Uxcell Woodworking Tool Round Over Bit Router 3 Diameter

Uxcell Woodworking Tool Round Over Bit Router, 3 Diameter

Uxcell Woodworking Tool Round Over Bit Router, 3 Diameter - Cuts all composition materials, plywood, hard wood, and soft wood. To create an attractive and precise half-round profile on furniture and moldings with this half round router bit. . It is very easy for you to operate. Use on hand held and table mounted portable routers.

 

Woodpeckers Precision Woodworking Tools RS-2 Rule Stop 2-Inch

Woodpeckers Precision Woodworking Tools RS-2 Rule Stop, 2-Inch

Woodpeckers Precision Woodworking Tools RS-2 Rule Stop, 2-Inch - Designed to fit rulers up to 2-1/4-inch wide. Can be placed anywhere along the rule. Precision machined edges align easily with engraved scale graduations. Knob, screw & post machined from stainless steel. Body parts are aluminum and anodized for decades of accurate performance.

 

Woodpeckers Precision Woodworking Tools BC4-M2X2 Box Clamp-M2-Pair

Woodpeckers Precision Woodworking Tools BC4-M2X2 Box Clamp-M2-Pair

Woodpeckers Precision Woodworking Tools BC4-M2X2 Box Clamp-M2-Pair - Joints left accessible after clamping. Molded from a special combination of glass reinforced polycarbonate virtually indestructible. Each clamp weighs over a half pound and comes with hardware for both hand as well as fixture use. Clamp any 90 degrees corner. Clamp will accommodate materials from 1/4 up to 1 inch in thickness. This simple device eliminates the hassle of using heavy, expensive bar clamps for assembling boxes, drawers and especially full size cabinets. Introducing woodpeckers newest clamping accessory the bc4-m2 box clamp. Imagine being able to dry-fit and square up all your parts at the same time without any bulky clamps.

 

Woodpeckers Precision Woodworking Tools COPESLED1 Coping Sled

Woodpeckers Precision Woodworking Tools COPESLED1 Coping Sled

Woodpeckers Precision Woodworking Tools COPESLED1 Coping Sled - Includes fully illustrated, detailed instructions. Traps board between adjustable top plate and fence with slotted top plate. The new woodpeckers coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints, and most other end grain cuts. It is the best way to ensure your board is perpendicular to the router fence and guides smoothly across the router bit. Two clamps move to the center of the work piece to prevent lifting. Clear guide allows the sled to track along the fence rather than the miter slot. Easily adjusts for material up to 5-1/2-inches. The woodpeckers coping sled uses two techniques to secure the your work piece.

 

Woodpeckers Precision Woodworking Tools WWR24 Woodworking Rule 24-Inch

Woodpeckers Precision Woodworking Tools WWR24 Woodworking Rule, 24-Inch

Woodpeckers Precision Woodworking Tools WWR24 Woodworking Rule, 24-Inch - Finger groove down center to help position the rule into place. Sits flat because of a recess down center of bottom surface. Precise laser engraved markings, 1/16-inch graduations. Markings engraved on a 30 degree bevel for easy alignment to pencil marks. Blade machined from aircraft-grade aluminum and anodized for surface protection and appearance.

 

Woodpeckers Precision Woodworking Tools KNCLAMP Individual Knuckle Clamp

Woodpeckers Precision Woodworking Tools KNCLAMP Individual Knuckle Clamp

Woodpeckers Precision Woodworking Tools KNCLAMP Individual Knuckle Clamp - Allows you to apply even pressure without marring the workpiece surface. Takes clamping ability to a whole new level. Features seven circular pivot points that provide a wide range of positions. Includes single knuckle clamp and mounting hardware. Molded from reinforced polycarbonate, these clamps are virtually indestructible.

 

Jack-Store 2Pcs Tongue Groove Router Bit Set 34 Stock 14 Shank For Woodworking Tool

Jack-Store 2Pcs Tongue & Groove Router Bit Set 3/4″ Stock 1/4″ Shank For Woodworking Tool

Jack-Store 2Pcs Tongue & Groove Router Bit Set 3/4″ Stock 1/4″ Shank For Woodworking Tool - 003″ tolerance (allowing smooth operation at high rpms)body:solid hardened steelblade:industrial grade micro grain carbidecutter:cnc ground to a 600 grit, mirror-like finishhook & shear angles:high hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. Featuresuseing for handmaking a drawer or other woodworkingindustrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingspecificationsdesign:anti-kickbackbalance:+/-. Package included1xtongue router bit1xgroove router bit. Bearing:totally enclosed & lubricatedcoating:baked on heat resistant coating prevents build-up of sawdust, resin, and pitch.

 

10PC HSS Routing Router Bits Burr Rotary Tools Suit Dremel Rotary Tool Engraving Wood Working Tools

10PC HSS Routing Router Bits Burr Rotary Tools Suit Dremel & Rotary Tool, Engraving, Wood Working Tools

10PC HSS Routing Router Bits Burr Rotary Tools Suit Dremel & Rotary Tool, Engraving, Wood Working Tools - 57 in x 0. 17mm 1. 31 in x 0. 8 cm x 0. 31 in (4 cm x 0. Application for processing of metallic and non-metallic surfaces using an engraving machine or mini-drill various forms of cutting part provide efficient processing of materials length is about 40mm,shank diameter is 3. 8 cm).

 

MLCS 9859 Combo T-Track and Miter T-Track for Router Tables and Woodworking Tool Tables

MLCS 9859 Combo T-Track and Miter T-Track for Router Tables and Woodworking Tool Tables

MLCS 9859 Combo T-Track and Miter T-Track for Router Tables and Woodworking Tool Tables - Router table, band saw table or table saw extension. Use your miter gauge or tenoning jig, plus t-track accessories. 32″ long. The t-track accepts any accessory that uses a 1/4″ hex head bolt, such as featherboards, stop blocks or hold downs. The miter track accepts a standard 3/4″ x 3/8″ bar or sliding t-bar.

 

Metal Tool Wax Polish 100ML Jar Bora STN-PTW100 - Protect Your Woodworking Tools and Machinery from Rust and Corrosion Without Harming Your Projects

Metal Tool Wax Polish, 100ML Jar Bora STN-PTW100 – Protect Your Woodworking Tools and Machinery from Rust and Corrosion, Without Harming Your Projects

Metal Tool Wax Polish, 100ML Jar Bora STN-PTW100 – Protect Your Woodworking Tools and Machinery from Rust and Corrosion, Without Harming Your Projects - Specifically formulated for woodworkers and woodworking tools does not contain any silicone compounds, which can harm your woodworking adhesives and finishes. A unique blend of microcrystalline waxes and metal corrosion inhibitors protects for up to two years. Use with confidence to protect your valuable woodworking tools and machinery from rust and corrosion. Easy to use soft paste wax for protecting your metal woodworking tools and machinery.

 

Woodpeckers Precision Woodworking Tools TS-24-2 T-Square 24-Inch

Woodpeckers Precision Woodworking Tools TS-24-2 T-Square, 24-Inch

Woodpeckers Precision Woodworking Tools TS-24-2 T-Square, 24-Inch - Scale edges beveled for improved line of sight to work piece. Accurate to 001-inch, guaranteed for life. Fitted wooden case machined with easy access finger slots. Precisely spaced 1mm holes drilled every 1/16-inch additional holes on exact 1-inch centers. Blade edges are machined to a 30 degree bevel for easy reading and laser engraved scales for measuring.

 

MiterSet turns any Miter Jig into a precision woodworking tool for Table Saws

MiterSet turns any Miter Jig into a precision woodworking tool for Table Saws

MiterSet turns any Miter Jig into a precision woodworking tool for Table Saws - Miterset is cnc milled from a solid aluminum billet hole placement is accurate to 1/1000th of an inch yielding beautiful, tight miter joints no gaps no sanding no wasted material. Comes with a fitted carrying case to protect the precision instruments and to keep them together between uses. 25-year product lifetime warranty miterset is guaranteed to be accurate for the full life of the product. The hole numbers are laser-etched for years of readability. Set from 0 to 525 degrees in 5 degree increments with 001 inch accuracy.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.