Southeast Tool 129333 Carbide Tipped Lock Boring Bit – 1-5/8″ D w/ 1 Flat Shank, 5-3/4″ OAL
- Works with most pre-hung door equipment. Carbide tipped for long life, these bits are recommended for wood doors. All bits have 1/2″ shank. 5-3/4″ overall length.
Southeast Tool SBT1T Carbide-Tip Brad Point Twist Bit – 1″D, 4″Lgt, 5-13/16″OAL, 7/16-14″ Shk/Thread
- 5-15/16″ overall length. No 200 ct for latch bore. 1″, threaded flats 1/2″ shank. Recommended for drive-in bolts.
Southeast Tool SLOC600 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL w/Flat on Shank
- (There are other definitions but they are all pretty close to this. With flat on shank braze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. This makes it expensive but it is really worth it. Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. It makes a clearly superior tool at a greatly reduced cost. ) Carbide brazing is done with a high silver braze alloy. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear. The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc. Door boring bit for automated pre-hung door equipment, carbide tipped, southeast tool sloc600 2 1/8 cutting diameter, 1/2 shank, 5 3/4 overall length.
Southeast Tool 129335 Carbide Tipped Lock Boring Bit – 1-7/8″ D w/ 1 Flat Shank, 5-3/4″ OAL
- All bits have 1/2″ shank. Carbide tipped for long life, these bits are recommended for wood doors. 5-3/4″ overall length. Works with most pre-hung door equipment.
Southeast Tool SDR305 3-Wing Bit – 5/8″ D x 6″ OAL x 1/2″ Shank
- Bore plastic formica and tempered masonite as well as abrasive materials and hard wood. Size, 5/8″ shank, 1/2″. Also excellent for lock hole boring in wood doors. Overall length, 6″ twist length, 1″.
Southeast Tool SEHMC375 Hollow Mortising Chisel – 3/8″D, 5/8″Shank, 3-1/4″Depth, 5-1/2″OAL
- For making square mortises in one stroke, and rectangular mortises with each succeeding stroke. Use with hollow chisel bits #1, 28 bit not included. 4″ blade, 5-1/2″ overall length, 1/4″ & 5/16″ sizes have reinforced blade all dimensions in inches. Size, 3/8″ shank diameter, 5/8″ shank length, 1-1/2″ mortising depth, 3-1/4″.
Southeast Tool SDR410F 3-Wing Bit w/ Flat – 2-1/8″ D x 6″ OAL x 1/2″ Shank w/ FLAT
- Shank, 1/2″. Size, 2-1/8″. Also excellent for lock hole boring in wood doors. Overall length, 6″ twist length, 1″.
Southeast Tool SE29007 General Purpose Drill Bits – 7/64″D, 2-5/8″OAL, 1-1/2″Flute, 1-1/8″Shank, RH
- Overall length, 2-5/8″ twist length, 1-1/2″. High speed steel, much longer life than carbon steel 118 point. No x10 general purpose jobbers length straight shank twist drills. Diameter, 7/64″ decimal equivalent, 1094″.
Southeast Tool SBPT1T-L-48L Brad Point Drill Bit w/ 18″ Auger Bit – 1/2″ D x 48″ L
- Mounts in a 1/2″ drill motor. Cutting length 6″. This extra-long drill bit can be used for door preparations where an extended length is required. 48″ brad point drill.
Southeast Tool SEHMA-1/2-XL Arbors For Screw-On Mortise Bits – 1/2″ D x 2-5/8″ OAL, 1/4-28 Thread
- Thread size, 1/4-27. Arbor, 1/2″.
Southeast Tool SLOC605 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL, 3 Flat on Shank
- Carbide tipped for long life, these bits are recommended for wood doors. All bits have 1/2″ shank. Works with most pre-hung door equipment. 5-3/4″ overall length.
Full Bead Bit, 3/16 Radius, 1″ Dia, 1/2 Cut Length, 1/4 Shank, Southeast Tool SE3192
- The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. This makes it expensive but it is really worth it. This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc. ) carbide brazing is done with a high silver braze alloy. It makes a clearly superior tool at a greatly reduced cost. Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. (There are other definitions but they are all pretty close to this. Full bead, form router bits, carbide tipped, southeast tool se3192 3/16 radius, 1 cutting diameter, 1/2 cutting length, 1/4 shank. Braze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear.
Southeast Tool 129330 Carbide Tipped Latch Boring Bit – 7/8″ Diameter with 1 Flat Shank, 6-1/4″ OAL
- 6-1/4″ length. Carbide-tipped. 7/8″ 1 flat.
Southeast Tool 129336 Carbide Tipped Lock Boring Bit – 2-1/8″ D w/ Round Shank, 5-3/4″ OAL
- Carbide tipped for long life, these bits are recommended for wood doors. 5-3/4″ overall length. Works with most pre-hung door equipment. All bits have 1/2″ shank.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
